Industrial product stocks have also recently become one of the bright spots in the market. Among them, Sany International once again climbed to the highest level since its listing. The stock has seen a high of 14.9 yuan on April 5, 2011, and closed at 14.66 yuan, still up 0.68. Yuan, an increase of 4.86%. As of the end of last year, Sany International’s revenue rose 41.1% to RMB 2.68 billion (RMB, the same below), while net profit rose 36.7% to RMB 670 million. The profit per share was 32 cents, and the final dividend was 7.6 HK cents. It is also recommended that every 10 5 red stocks. The dividend for the same period last year was 6 cents. At current prices, the stock price and earnings ratio is as high as 38 times, valuation is not cheap, and the interest rate is 0.52%, which is also unattractive. If you choose the same type of shares, you can pay attention to Weichai Power (2338). Weichai Power recently revisited its support at the level of 45 yuan. On April 5th, it even escalated the 50 yuan mark. The high scored 51.45 yuan, and closed at 51.35 yuan, up 2.2 yuan, or 4.48%. Weichai earlier announced its 2010 annual results, with a turnover of 62.666 billion yuan, an increase of 77.7% year-on-year; gross profit of 13.471 billion yuan, an increase of 76.5%. Net profit rose 99% to 6.781 billion yuan, and earnings per share were 4.07 yuan. The final rate was 43 points, and 48 points were distributed during the same period last year. The Group's performance was better than market expectations. As for the dividends, the dividends did not increase. However, if there are 10 to 10 bonus shares during the period, dividends have already increased significantly. In fact, the group had a surplus of 716 million for dividends in the 10 years, compared with 399 million in FY09. In 2011, the year in which the "Twelfth Five-Year Plan" started, the management had confidence in the prospects and it was expected that the annual sales revenue would reach 73 billion yuan. At current prices, the stock market earnings ratio is about 10 times, and it is still at a very reasonable level. The stock price is also on the 10, 20, and 50-day averages and the technical trend is improving. On the other hand, Weichai Power has always been regarded as a fund-loving stock. With signs of hot money continuing to flow into Hong Kong stocks, the stock is expected to become the target of the market collection. The current level is on the train, the goal is to reach an annual high of 60.45 yuan, but the loss of 45 yuan support will stop loss. Hong Kong stocks Powei promotion round 29940 desirable Hong Kong stocks have successfully exceeded the 24,000 mark. If we continue to see the market climbing, we can pay attention to the Hang Seng Credit Suisse (29940). 29940 Monday to close at 0.17 yuan, up 0.023 yuan, an increase of 15.65%, 1.1 billion shares traded. The certificate expired on July 28 this year, the conversion price was 23,700, the current premium is 3.77%, the extension is 23.65%, and the actual leverage is 9.8 times. The 29,940 wins are more buoyant. The data is now reasonable and its explosiveness is strong. Both are more desirable. Investment Strategy: Red Chip and State-owned Enterprise Stocks: Hong Kong stocks rebounded and the investment climate of Chinese stocks is expected to heat up. Weichai Power: The performance is satisfactory, and the current valuation is not expensive. It is expected that the rebound will expand. Target price: 60.45 yuan Stop bit: 45 yuan A blended powder of tungsten carbide and Metal Alloy Powder can be used for laser cladding, a process used to deposit a layer of material onto a substrate using a laser beam. This blended powder is typically used as a feedstock material for laser cladding applications where high wear resistance and hardness are required. WC Blend,Blended Powder,High Hardness Powder,Blended Coating Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.lygoldentool.com
Tungsten carbide is a hard and wear-resistant material that is commonly used in cutting tools, mining equipment, and other high-wear applications. It has excellent thermal conductivity and high melting point, making it suitable for laser cladding processes.
Metal alloy powders, on the other hand, are often added to the Tungsten Carbide Powder to enhance certain properties or tailor the characteristics of the final cladding layer. These metal alloys can include nickel, cobalt, chromium, or other elements, depending on the specific requirements of the application.
The blended powder is typically prepared by mixing the tungsten carbide and metal alloy powders in the desired ratio. This mixture is then fed into a laser cladding system, where it is melted using a high-power laser beam. The molten powder is rapidly solidified onto the substrate, forming a dense and wear-resistant cladding layer.
The resulting cladding layer can have excellent hardness, wear resistance, and thermal conductivity, making it suitable for various applications such as tooling, wear parts, and surface protection. The specific properties of the cladding layer can be adjusted by varying the composition and ratio of the tungsten carbide and metal alloy powders in the blend.
Overall, the blended powder of tungsten carbide and metal alloy powder offers a versatile and customizable solution for laser cladding applications, providing enhanced wear resistance, hardness, and other desired properties to the final cladding layer.