What are the characteristics of coal coal meter

The disk coal meter is a volume measuring instrument used to measure the volume of any shape of stock in open stockyards and dry stockyards. The stockpiling does not require strict shaping. It uses the industry's most advanced US Cantor laser range finder to measure the three-dimensional coordinates of the surface feature points of the measured object. After processing and calculation by computer software, the volume and weight of the measured object are obtained and can be reproduced. A three-dimensional view of the stack.

1. Accuracy of disc coal analyzer: No disc coal dead angle, relative error <0.5%; High degree of automation: Most of the measurement data is automatically collected by the scanner, and the labor intensity is low;

2, the speed of the coal is fast: It can finish scanning and measuring work of a coal yard in about half an hour. Calculated at the scene, all the results of the disk coal can be obtained within one minute;

3, Auxiliary equipment less, basically zero maintenance; easy to operate: each step of operation with Chinese tips and instructions, easy to learn and easy;

4. Flexible use: It can calculate the coal storage in any specified range in the coal yard; function diversification: a variety of graphs are generated during program operation. It is possible to view the height and plane coordinates of any point on the coal pile and plot coal seam profiles in either direction;

5. Wide range of applications: For coal yards with installed scanners, coal can be used when the stacker-reclaimer cannot operate, and coal can be used for coal yards where scanners cannot be installed.

The coal-meter is easy to use and the measurement accuracy can reach more than 99%. It is suitable for ordinary stockpile inventory work. In the manual measurement, this laser inventory meter can also provide information such as length, height, width, etc., eliminating the tedious tasks such as pulling a ruler, is a good helper for your work.

The coal analyzer uses a laser scanner to automatically scan the coal yard. For the scanning dead zone in the coal yard, a portable laser measuring instrument is used for manual scanning measurement. The computer processed the data obtained by the two instruments. The digital model was used to establish a digital model of the coal field surface. The coal volume was calculated according to the volume integral principle, and the three-dimensional map of the coal field was plotted according to the digital model. The calculated volume is then multiplied by the proportion of coal as the coal storage capacity in the coal yard.