Chinese Hydraulic Truck Mobile Crane with 10t Capacity

Mobile Crane 5 tons will assemble on a common chassis or special chassis of a crane. Its moving cabin and operating cabin are set separately.

Mobile Crane 5 tons has the advantage of good maneuverability and quick movement. Performence of mobile crane 5 tons chassis is equivalent to the vehicle with same total weight.

 

Operation specification:

1) The crane driver must be professional and technical trained, examination qualified and getting 

the certificate can operate independently.

2) The driver should be familiar with mechanical principle of mobile crane, maintenance rules, 

safety operation procedures, and strictly carry out according to regulations. It is forbidden to drink or body has not indications for operation.

3)Before use people should check whether the job site is flat solid in detail, leg whether firm, 

operating handle, brake and other operating device is sensitive and reliable, to ensure working 

without anything abnormal.

(4) When hook lifting, the components must be the in the direction of the rear of the lifting. 

Lifting must first do try hangings, to avoid excessive lifting, minimize the objects stay in the air, 

suspended substance to slow even when landing.

(5) When working, the abrasion of wire rope should be often observed. When the crane boom 

angle is large, the hanging material should first be down to the position, in keeping the sling 

tension condition, then lower hoist boom, loose rope, and pick the hook.

6)Hoist boom lift must fall back when: do not lower down the arm when lifting heavy objects. 

The throttle is smaller when lowing the arm and bigger when lifting. Rotary motion is to be steady, not sudden reversal, when close to the rated weight load, shall not air rotary when the ground 

clearance is 0.5 m above.

7)It is strictly prohibited to lifting when driving, the lift arm must be put on the bracket when driving, the hook is in the bumper, and the wire rope to pull tight.

(8) After the completion of the work, lifting legs and sawing arm shall not simultaneously. 

Driving on the highway, it is imperative to strictly abide by the traffic rules, turning slowly, 

and strictly control the speed of the car on the way down.

 

 Tavol Cranes Group is an esteemed, leading disciplined and quality manufacturer and service provider for the lifting, materials handling products and Construction Machinery for the Industry.

It is a family business and of 30 years, have now expanded to be also a leader to manufacture Mobile Cranes, Overhead cranes, Gantry Cranes, Electric Hoist, Jib Cranes, Scissor Lift, Tower Cranes, Building hoist, etc.

Our mission statement is to service our customers to provide quality to the end user while working and growing together.

 

It is a great thing to see lots of TAVOL CRANES are insatlled in different countries. Many customers from different countries come to visit us to establish a long-term business relationship with us.They said because of our crane, their heavy work becomes easier.

 

They gave much advice to us and we learned a lot from them and then we are growing up together. Now we are not only business partners, but also close friends. 

 

Welcome to visit us at your convenient time!

Let's start our business from your clicking.

 

 

 If you want to inquiry about our mobile crane, please inform us the details as below:

1. Lifting capacity?

2. Lift height?

3. Engine power?

 

Mobile Crane 5 tons will assemble on a common chassis or special chassis of a crane. Its moving cabin and operating cabin are set separately.

Mobile Crane 5 tons has the advantage of good maneuverability and quick movement. Performence of mobile crane 5 tons chassis is equivalent to the vehicle with same total weight.

 

Operation specification:

1) The crane driver must be professional and technical trained, examination qualified and getting 

the certificate can operate independently.

2) The driver should be familiar with mechanical principle of mobile crane, maintenance rules, 

safety operation procedures, and strictly carry out according to regulations. It is forbidden to drink or body has not indications for operation.

3)Before use people should check whether the job site is flat solid in detail, leg whether firm, 

operating handle, brake and other operating device is sensitive and reliable, to ensure working 

without anything abnormal.

(4) When hook lifting, the components must be the in the direction of the rear of the lifting. 

Lifting must first do try hangings, to avoid excessive lifting, minimize the objects stay in the air, 

suspended substance to slow even when landing.

(5) When working, the abrasion of wire rope should be often observed. When the crane boom 

angle is large, the hanging material should first be down to the position, in keeping the sling 

tension condition, then lower hoist boom, loose rope, and pick the hook.

6)Hoist boom lift must fall back when: do not lower down the arm when lifting heavy objects. 

The throttle is smaller when lowing the arm and bigger when lifting. Rotary motion is to be steady, not sudden reversal, when close to the rated weight load, shall not air rotary when the ground 

clearance is 0.5 m above.

7)It is strictly prohibited to lifting when driving, the lift arm must be put on the bracket when driving, the hook is in the bumper, and the wire rope to pull tight.

(8) After the completion of the work, lifting legs and sawing arm shall not simultaneously. 

Driving on the highway, it is imperative to strictly abide by the traffic rules, turning slowly, 

and strictly control the speed of the car on the way down.

 

 Tavol Cranes Group is an esteemed, leading disciplined and quality manufacturer and service provider for the lifting, materials handling products and Construction Machinery for the Industry.

It is a family business and of 30 years, have now expanded to be also a leader to manufacture Mobile Cranes, Overhead cranes, Gantry Cranes, Electric Hoist, Jib Cranes, Scissor Lift, Tower Cranes, Building hoist, etc.

Our mission statement is to service our customers to provide quality to the end user while working and growing together.

 

It is a great thing to see lots of TAVOL CRANES are insatlled in different countries. Many customers from different countries come to visit us to establish a long-term business relationship with us.They said because of our crane, their heavy work becomes easier.

 

They gave much advice to us and we learned a lot from them and then we are growing up together. Now we are not only business partners, but also close friends. 

 

Welcome to visit us at your convenient time!

Let's start our business from your clicking.

 

 

 If you want to inquiry about our mobile crane, please inform us the details as below:

1. Lifting capacity?

2. Lift height?

3. Engine power?