The plane Mask Machine is an indispensable production equipment in the large-scale mask processing factory. The plane mask machine has gradually become the most important thing for the mask processing profession. The plane mask machine uses the ultrasonic system to weld the needle punched cotton, non-woven fabric and melt blown fabric together in a special order. There is a layer of bacteria filtering melt blown fabric in the middle of the plane mask to produce various non-woven finished mask production machines with filtering function. disposable mask machine, disposable mask machine price, disposable mask machine market, disposable mask machine application Dengzhou Longyi Machinery Co., Ltd , https://www.nylongyi.com 1. When driving bulk cement trucks, do not overspeed or overpressure. Overspeed or overpressure can seriously damage the air compressor. The maximum speed of this machine can be seen in the main technical data sheet, working pressure is 0.2MPa.
Our disposable masks are the mainstream products of mask manufacturers. Most of the special-shaped masks are made of non-woven materials. This kind of material does not have any peculiar smell, and has no harm to the human body. Contact with the human face will not cause irritation or allergy to the face. The cup-shaped mask, special-shaped mask and bridge of nose stick can also make both sides of nostrils closely combined with the mask, so as to effectively avoid air leakage. As we all know, non-woven materials are very energy-saving, environmental protection, mainly composed of polypropylene materials, so the cost and price will be lower.
Powder material transporter
2, do not quickly start or stop the air compressor, but should slowly increase or deceleration, otherwise, punch pressure will damage the air compressor.
3, do not change the direction of rotation of the air compressor, otherwise, the oil pump will not seriously damage the machine.
4. Do not stop the air compressor before decompression. Otherwise, the powdered material may flow back into the air cylinder, causing serious damage to the air compressor.
5, need to check the oil standard before starting. The oil level must not be lower than the lower limit of the oil standard; always check whether the oil pump is supplied with oil. If it is not supplied with oil, check it immediately. Otherwise, the lack of oil can seriously damage the air compressor.
6, to replace the oil on schedule. 30 hours after the new machine is used, the oil in the crankcase is drained, the inside of the crankcase and the oil filter net are cleaned, and then the oil is changed. After that, change the oil once a year.
7, to check and clean the oil filter. Normal conditions are checked and cleaned once every quarter. If the machine usage rate is high, it should be checked and cleaned once a month.
8. The lubricant used by this machine is CD40 diesel engine oil. It is forbidden to mix different brands of lubricants, otherwise the deterioration of lubricants will affect the lubrication effect.
9, to maintain and clean the air filter element every 30 hours of work. While rotating the filter element, the compressed air with a pressure of less than 0.6 MPa is blown from the inside to the outside. After five maintenance, replace the new filter element. Never clean the filter element with oil or water.