Two Stage Plastic Pelletizing Machine for Plastic PP,PE Film Recycling The pellets produced by the recycling machine can be put directly back into the production line, in most cases for blown film or pipe extrusion processes. 1. Pellets from in-house, post-industrial recycling Two Stage Plastic Pelletizing Machine for Plastic PP,PE Film Recycling The pellets produced by the recycling machine can be put directly back into the production line, in most cases for blown film or pipe extrusion processes. 1. Pellets from in-house, post-industrial recycling
Sodium Hydroxide Flakes, also known as lye and Caustic Soda Flakes, is an inorganic compound with the formula NaOH.
Sodium hydroxide is a highly caustic base and alkali that decomposes proteins at ordinary ambient temperatures and may cause severe chemical burns. Pvc Resin is highly soluble in water, and readily absorbs moisture and carbon dioxide from the air.The commercially available "sodium hydroxide" is often this monohydrate, and published data may refer to it instead of the anhydrous compound.
Sodium hydroxide is used in many industries: in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents, and as a drain cleaner. Worldwide production in 2004 was approximately Boric Acid Flakes 60 million tons, while demand was 51 million tons.
Use Of Caustic Soda,Caustic Soda Pearls is also widely used in pulping of wood for making paper or regenerated fibers. Along with sodium sulfide, sodium hydroxide is a key component of the white liquor solution used to separate lignin from cellulose fibers in the kraft process. It also plays a key role in several later stages of the process of bleaching Water Treatment the brown pulp resulting from the pulping process.
Caustic Soda Flakes,Sodium Hydroxide Flakes,Caustic Soda Pearls,Use Of Caustic Soda HENAN LIHAO CHEM PLANT LIMITED , https://www.lihaoche.com
On average, post-industrial waste makes up 5% or more of the entire production line, making in-house recycling very important nowadays as it can significantly reduce the cost of raw/virgin material purchasing.
The plastic pellets produced from in-house waste are almost like-new and can be re-used for producing high quality plastic products once again.
2. Pellets from post-consumer recycling
The ML two stage plastic recycling granulator is also designed to work with washed, post-consumer and used agricultural film. The cutter compactor, which generates frictional heat during the compacting process, helps to further dry and remove the water moisture from the washed film flakes (processed first by the washing lines). The recycled pellets can be used again in extrusion process, whether 100% (such as garbage bag, LDPE pipe production and etc) or as part of the mixture to reduce raw material cost. The pellets quality can also be improved by direct dosing of masterbatch and additives.
Parameters
PRODUCTS
PP/HDPE/LDPE/LLDPE/EVA/ABS/PS
MAX. OUTPUT /Â HR .
PP
600KG
HDPE
700KG
LDPE
800KG
INSTALLED POWER
420KW
SHREDDING UNIT
DRIVING MOTOR
110KW
SHREDDER DRUM DIA(m/m)
1300
SHREDDING KNIVES
9 FOR ROTARY
13 FOR STATIONARY
EXTRUDER
SCREW DIAMETER(m/m)
Ø160mm
L/D RATIO
30/1
SCREW RPM
10-120
BARREL HEATER
75KW
BARREL COOLING
BY AIR
TEMPERATURE CONTROL ZONE
0.5KW×5
Detailed photos
Our service:
Before-sale
• Introduce products in detail  Â
• Recommend suitable solution  Â
• Offer test
During manufacturing
• Provide layout and engineering conditions  Â
• Offer screw plan and related documents
• Inform the project processing status Â
• Insure the product designed in accordance with technical document
After-sales service:
• Send engineers to install, test the machines and offer technology guidance and worker training at customers' factory.
• Offer 12 months free maintenance and life long service. After the warranty period, spare parts will be provided at basic cost.
• Build customers database. All machines are traceable.
• Visit customers and make quality trace periodically and take customers' feedback into account during routine practices.
• Speed up service and spare parts supply.
Feel free to contact with me if you have any questions:
Contactor: Ms Laura
Mobile: 86 159 6236 6319 Â : )
On average, post-industrial waste makes up 5% or more of the entire production line, making in-house recycling very important nowadays as it can significantly reduce the cost of raw/virgin material purchasing.
The plastic pellets produced from in-house waste are almost like-new and can be re-used for producing high quality plastic products once again.
2. Pellets from post-consumer recycling
The ML two stage plastic recycling granulator is also designed to work with washed, post-consumer and used agricultural film. The cutter compactor, which generates frictional heat during the compacting process, helps to further dry and remove the water moisture from the washed film flakes (processed first by the washing lines). The recycled pellets can be used again in extrusion process, whether 100% (such as garbage bag, LDPE pipe production and etc) or as part of the mixture to reduce raw material cost. The pellets quality can also be improved by direct dosing of masterbatch and additives.
Parameters
PRODUCTS
PP/HDPE/LDPE/LLDPE/EVA/ABS/PS
MAX. OUTPUT /Â HR .
PP
600KG
HDPE
700KG
LDPE
800KG
INSTALLED POWER
420KW
SHREDDING UNIT
DRIVING MOTOR
110KW
SHREDDER DRUM DIA(m/m)
1300
SHREDDING KNIVES
9 FOR ROTARY
13 FOR STATIONARY
EXTRUDER
SCREW DIAMETER(m/m)
Ø160mm
L/D RATIO
30/1
SCREW RPM
10-120
BARREL HEATER
75KW
BARREL COOLING
BY AIR
TEMPERATURE CONTROL ZONE
0.5KW×5
Detailed photos
Our service:
Before-sale
• Introduce products in detail  Â
• Recommend suitable solution  Â
• Offer test
During manufacturing
• Provide layout and engineering conditions  Â
• Offer screw plan and related documents
• Inform the project processing status Â
• Insure the product designed in accordance with technical document
After-sales service:
• Send engineers to install, test the machines and offer technology guidance and worker training at customers' factory.
• Offer 12 months free maintenance and life long service. After the warranty period, spare parts will be provided at basic cost.
• Build customers database. All machines are traceable.
• Visit customers and make quality trace periodically and take customers' feedback into account during routine practices.
• Speed up service and spare parts supply.
Feel free to contact with me if you have any questions:
Contactor: Ms Laura
Mobile: 86 159 6236 6319 Â : )
Plastic Granulating Machine Specially Designed for Squeezed Film
Model NO.: SJ160/SJ180
Customized: Customized
Certification: CE, UL
Condition: New
Motor Brand: Siemens, ABB, Weg or Chinese Best Brand
Screw & Barral Material: 38CrMoAl, Bimetallic, Nitrogen Treatment
Heating Method: Electrical Heating, Electromagnetic Heating
Material of Heater: Cast Aluminium, Cast Copper, Mica, Ceramic Heater
Gearbox: Changzhou Guomao or Customized
Bearing Brand: SKD-11 or Customized
Cooling Method: Air Cooling
Frequency/Inverter Brand: ABB, FUJI, Delta, Siemens
Cutting Method: Die Face Cutting, Pulls Strap Cutting Method
Guarantee: 13 Months After Leave Our Factory
Trademark: PURUI
Transport Package: Standard Export Packing
Specification: 7000mmx2500mmmx3000mm
Origin: Zhangjiagang City
HS Code: 84772010
Model NO.: SJ160/SJ180
Customized: Customized
Certification: CE, UL
Condition: New
Motor Brand: Siemens, ABB, Weg or Chinese Best Brand
Screw & Barral Material: 38CrMoAl, Bimetallic, Nitrogen Treatment
Heating Method: Electrical Heating, Electromagnetic Heating
Material of Heater: Cast Aluminium, Cast Copper, Mica, Ceramic Heater
Gearbox: Changzhou Guomao or Customized
Bearing Brand: SKD-11 or Customized
Cooling Method: Air Cooling
Frequency/Inverter Brand: ABB, FUJI, Delta, Siemens
Cutting Method: Die Face Cutting, Pulls Strap Cutting Method
Guarantee: 13 Months After Leave Our Factory
Trademark: PURUI
Transport Package: Standard Export Packing
Specification: 7000mmx2500mmmx3000mm
Origin: Zhangjiagang City
HS Code: 84772010