High Speed Door For Air Shower Use High Speed Door For Air Shower Use,Air Shower High Speed Door, Cargo Shower High Speed Door, Air Shower Room High Speed Door, Cargo Shower Room High Speed Door SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfafrud.com
1. Unplug the tools before opening it to avoid of being hurt by exposed wires or component inside the machine with power
2. Incorrect use of it can cause fire and explosion hazard because of high temperature, especially near combustible materials and explosive gases.
3. Don't touch heater tube and nozzle when they are hot. They may cause burns. Don't point hot air flow in the direction of people or animals.
4. The voltage rating stated on the welder must correspond to line/mains voltage (220V).
The drop cable / wire with protective earthed conductors can only be used.
5. To ensure operator safety and reliable operation of equipment, the power supply must be installed power supply and leakage protection at the construction site.
6. It must be running at the correct use of manipulation of the operator, or they may cause a fire or explosion caused by high temperature.
7. Don't use welder in the water, or on a muddy construction site, to avoid flooding, rain or moisture.
Â
ii. Notice:
1. Unplug the tools before opening it to avoid of being hurt by exposed wires or component inside the machine with power
2. Incorrect use of it can cause fire and explosion hazard because of high temperature, especially near combustible materials and explosive gases.
3. Don't touch heater tube and nozzle when they are hot. They may cause burns. Don't point hot air flow in the direction of people or animals.
4. The voltage rating stated on the welder must correspond to line/mains voltage (220V).
The drop cable / wire with protective earthed conductors can only be used.
5. To ensure operator safety and reliable operation of equipment, the power supply must be installed power supply and leakage protection at the construction site.
6. It must be running at the correct use of manipulation of the operator, or they may cause a fire or explosion caused by high temperature.
7. Don't use welder in the water, or on a muddy construction site, to avoid flooding, rain or moisture.
Â
Hot Air Heat Melt Soldering Roofing PVC Membrane Welding Machine
Model NO.: ZX7000
Power: High Frequency
Voltage: 230V
Frequency: 50/60Hz
Welding Width: 40mm
Size( L*W*H): 555*358*300mm
Weight: 34kg
Trademark: HEATFOUNDER
Transport Package: Carton
Specification: overlap welding PVC
Origin: China
HS Code: 8515809090
Model NO.: ZX7000
Power: High Frequency
Voltage: 230V
Frequency: 50/60Hz
Welding Width: 40mm
Size( L*W*H): 555*358*300mm
Weight: 34kg
Trademark: HEATFOUNDER
Transport Package: Carton
Specification: overlap welding PVC
Origin: China
HS Code: 8515809090
ii. Notice: