Power Coating High Speed Pre-mixer
1. Application:
This machine is first machine for powder coating production line,which is multi-functions machine to support crushing and mixing of raw materials.
It is widely used in powder coating.
7. Easy to clean and change color
3.Machine Picture:
4.Our Advantage & Service:
-Technical Support Online Service Provided
We can supply all Powder Coating Raw Materials( polyester resin, epoxy resin, barium sulfate, gloss agent and so on) in the formulation.
High Speed Pre Mixer,Powder Coating Mixer,Poweder Coat Mixer,High Speed Premixer Yantai Yuanli Corp Ltd , https://www.yuanlicorpcn.com
Structure 1. The fan adopts centrifugal fan structure, large air volume, high wind pressure, noise elimination measures, and low noise during use.
2. The filter material of the single filter bag is selected 208 industrial polyester needle felt, the filter bag structure is a flat bag, each filter bag is equipped with a spring dust collector skeleton, the filtering effect is good, the replacement of the filter bag is convenient, and the service life is long .
3. The dust removing mechanism of the dust remover adopts an electric motor with an eccentric wheel to drive the connecting rod to shake the filter bag and remove dust on the outer surface of the dust filter bag. The cleaning mechanism has two types of automatic control and manual control; the automatic control means that the fans work continuously; the rapping and cleaning can be performed on demand; and after the manual control, that is, the fans stop, the cleaning mechanism automatically works and stops automatically after tens of seconds.
4. A spacious and sealed access door is installed on the single dust collector housing to facilitate the replacement of filter bags and the repair of internal components.
5. The single dust collector parts adopt the drawer type structure, which is convenient for operation and cleaning.
6.Single dust collector is equipped with dust gas inlet on one side, which can be used for dust collection equipment such as unpacking port, feed ash port, blasting tank, vibrating screen, crusher, bucket elevator and belt conveyor. And control (1) Working principle: Dust-laden gas is pumped into the box by the fan (installed in the upper part of the box) (entering from the middle or lower part of the box) and filtered by the bag. The dust is trapped on the surface of the filter bag and after purification The gas suction fan is discharged from the air outlet. The dust on the surface of the filter bag increases as the dust increases, the thickness of the filter bag increases, the resistance of the filter bag increases, and the dust removal efficiency decreases. In order to ensure efficient use of the dust collector, the dust accumulated on the surface of the filter bag must be removed. The PL dust collector is equipped with self-controlled dust removal. The device performs regular rapping to remove dust on the filter bag surface.
(2) Operation control: Connect the dust collector fan motor 1D and the dust removal motor 2D (J-type belt discharging motor 3D) to the electric control box, and then connect the 380V three-phase four-wire AC power supply with a control circuit of 220V. , And access to reliable ground.
1.Touch screen control
2. First time use the patent technology into the auto pre-mixer
3. Double direction mixing
4. Adjustable position during mixing
5. Double direction crushing
6. Collecting system while stopping
According to customer's requirement, we provide layout (plant designer), excellent mechanical engineer, excellent electrician, etc.
-On-site Training Service Provided
In customer factory, we provide all kinds of training, including installation, commissioning
-Long-term Maintenance Provided
In the area of maintenance, we offer needs-oriented and standardized maintenance packages, such as the overhaul of components, gearboxes, in order to guarantee the safe and economic operation of plant and machinery.
-Spare Parts Replacement and Repair Service Provided
Providing spare parts for all kinds of powder coating processing equipment in long-term. And can provide tailored made spare parts according to customers' requirements. Ensure advanced craft, good material and high precision.
-Formulation Provided (our advantage):
Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.
PL type single dust collector
PL series single dust collector Introduction PL series single dust collector is a more advanced domestic dust removal equipment. PL single dust collector is a dust collection unit with small size, dexterous appearance and high dust removal efficiency. The basic structure of the dust removal equipment series consists of three components: blower, filter and dust collector. Each component is installed in a vertical frame, steel plate shell, baking paint anti-rust, beautiful appearance, scientific structure, reliable operation Easy to use. It is mainly suitable for the dust removal application of small-density non-fibrous dust, and the dust removal efficiency can be as high as 99.9%. The filter cartridge of the dust removal device is made of imported polyester fiber, and has the advantages of high dust removal efficiency, fine dust collection, small external dimensions, convenient installation and maintenance, long service life, and the like. During the operation of the equipment, due to the continuous deposition of dust on the surface of the filter cartridge in the filter, resistance is gradually formed, and saturation will soon be reached on the surface of the filter cartridge. When a certain saturation allowable resistance value is reached, the electronically controlled automatic pulse Backflush system for automatic cleaning. It is achieved by blowing compressed air. The filter cartridges are cleaned separately, so that a long period of air flow is ensured during the cleaning process, so the device can work for 24 hours in a row, and the dust removal effect is still very good.