Reactive Silicone Fluid Series Silicone oil generally refers to linear polysiloxane products that remain liquid at room temperature. Generally divided into two types: methyl silicone oil and modified silicone oil. The most commonly used silicone oil-methyl silicone oil, also known as ordinary silicone oil, its organic groups are all methyl, methyl silicone oil has good chemical stability, insulation, and good hydrophobic properties. It is obtained by hydrolyzing dimethyldichlorosilane with water to obtain the primary polycondensation ring body. The ring body is cracked and rectified to obtain the low ring body, and then the ring body, the capping agent and the catalyst are put together to obtain each A mixture of different polymerization degrees can be obtained by vacuum distillation to remove low-boiling substances. Silicone Fluids,Silane Coupling Agent,Reactive Silicone Fluid,Reactive Silicone Polyether Oil Suzhou Cheerchem Advanced Material Co., Ltd. , https://www.szcheerchem.com
First, companies that use heat-conducting oil boilers must be equipped with boiler makers in accordance with national regulations, and ensure that the boilers are ignited until the boilers are evacuated and the pump is stopped;
Second, before use, first of all, should adjust the concentricity of the pump and the motor, and secondly, lubricate the oil in the pump bearing room, do not fill the oil, half of the bearing room is better, if the oil is full please temporarily Seal the oil injection hole, run the oil for a period of time and then seal the oil filling hole. Finally, determine whether the heat transfer oil pump is rotating forward, that is, stand behind the motor and look forward clockwise to turn it forward;
Third, open the normal operation of the heat transfer oil pump, in the use of the process should be based on the actual situation of the main and auxiliary pump rotation use. In short, gradually seek experience in the use process to ensure the normal operation of the thermal oil pump.
RY series air-cooled high-temperature heat-conducting oil pump is one of the main products of our company. Its material is cast steel and can also be customized into stainless steel according to customer requirements.
It is mainly used for transporting weak corrosive high-temperature liquids without solid particles. The use temperature is ≤ 380°C, which is an ideal circulation pump.
The structure and performance of the heat-conducting oil pump make it widely used and promoted in different industrial fields. It can withstand high temperatures and has good sealing performance under high temperature. It is a major leap in the technology of the oil pump industry. The product is the leading product of our company. , Excellent performance, its novel structural design scheme, making the whole machine without additional water cooling system at 380 °C high temperature, natural cooling, stable operation, saving operating costs, and reliable sealing performance, long operating life; in terms of hydraulic performance, The series of products refer to advanced hydraulic models at home and abroad for optimal design, and achieved high design efficiency. It has a level in domestic hot oil pumps and is highly praised by users. This series of products have been rated as new products and energy-saving products, and Series passed the ISO9001 quality system certification.
How to use hot oil pump normally
As the main auxiliary engine of the heat-conducting oil boiler, the heat-conducting oil pump plays a decisive role in the use of the heat-conducting oil boiler. Therefore, it is very important to use the heat-conducting oil pump correctly. How to use the heat-conducting oil pump correctly? After many years of experience and practice, we believe we should click on several aspects: