December 23, 2024

High Power Iron Dry Wet Magnetic Separator for Sand

Model NO.: 9018
Energy Saving: Energy Saving
Warranty: 5 Years
Color: Yellow
Customized: Customized
Condition: New
Model: 9018
The Maximum Feed Size: 18-450mm
Capacity: 150-600 T/H
Trademark: TSDC
Transport Package: Plastic Film
Specification: 9018
Origin: Tangshan
HS Code: 84742020
Model NO.: 9018
Energy Saving: Energy Saving
Warranty: 5 Years
Color: Yellow
Customized: Customized
Condition: New
Model: 9018
The Maximum Feed Size: 18-450mm
Capacity: 150-600 T/H
Trademark: TSDC
Transport Package: Plastic Film
Specification: 9018
Origin: Tangshan
HS Code: 84742020
Overview: Magnetic separator can be divided into dry magnetic separator and wet magnetic separator. The magnetic separator is the most widely used mining machine with advantages of simple structure, easy to operate, easy to maintain and so on. The magnetic separator is widely used in iron powder removal, and magnetic separator is also widely used in resource recovery, timber industry, mining, ceramic, chemical, food and so on. The magnetic separator is suitable for wet magnetic separation of magnetite, pyrrhotite, roasted ore, ilmenite and other materials with granularity below 3mm, and the iron removal of coal, non-metallic mineral, building material and other material.

High Power Iron Dry Wet Magnetic Separator for Sand

Structure: The magnetic separator is mainly composed of drum, roller, brush roller, magnetic system, tub and transmission parts. Cylinder is rolled welding by 2-3 mm stainless steel plate, and the end cover is aluminum casting connected by stainless steel screw and barrel. Motor regulates motor speed through the reducer, which drives the cylinder and magnetic roll do rotary motion. Magnetic system is open, installed in inside cylinder and all bared magnetic. Magnetic block is installed in the plate of yoke by stainless steel bolt, and the shaft of the yoke is out of the barrel. The end shaft is fixed with turn arm, which can adjust the magnetic system angle. The working area of trough is made up with stainless steel, and the frame and other parts of the cell body is welded with ordinary steel.

High Power Iron Dry Wet Magnetic Separator for Sand

Characteristics
1. Material adaptability
Drum sieve (rotary cylinder sieve) is widely used in all kinds of material screening, either inferior coal, slime, or bituminous coal and other materials can smoothly screening.
2. Simple and varied feeding mode
Feed port can be based on the actual set of juice whether it is a belt,funnel or other feeding methods,can be smooth feeding without special measures.
3. High screening efficiency
Provided with a comb type cleaning mechanism,improving the screening efficiency of the equipment no matter how dirty the materials are.
4. Large sieve component,easy to large-scale
Circle area of the screening of effective area is large, so that the material can fully contact with the screen, thus per unit time screen component is big. Because of its simple structure, convenient arrangement, new technology and mature characteristics and easy large-scale.

High Power Iron Dry Wet Magnetic Separator for Sand
5. Good working environment
Fully enclosed structure, material dust will not fly, to avoid the pollution of the work environment.
6. Low noise
Low speed and sealed isolation cover reduce the noise of the trommel screen.
7. Long lifespan and easy maintenance
Long service life,little wearing parts,small maintenance
8. Convenient maintenance
Equipment seal isolation on the cover can be taken apart, does not affect the normal operation of the machine, and the maintenance is very convenient.

High Power Iron Dry Wet Magnetic Separator for Sand
 
Type
(wet separator)
drum
diameter
(mm)
drum
length
(mm)
Magnetic intensity(Gauss) Rotating speed(r/min) Capacity (T/H) Motor Power(kw)
CTB-609 600 900 ≥1500 35 8-15 >100
CTB-612 600 1200 ≥1500 35 10-20 >100
CTB-618 600 1800 ≥1500 35 15-30 >100
CTB-718 700 1800 ≥1500 28.6 20-45 >100
CTB-918 900 1800 ≥1500 25.6 25-55 >100
CTB-921 900 2100 ≥1500 25.6 30-60 >100
CTB-924 900 2400 ≥1500 25.6 35-70 100~150
CTB-1018 1050 1800 ≥1500 22 40-75 150~200
CTB-1024 1050 2400 ≥1500 22 52-100 200
CTB-1030 1050 3000 ≥1500 22 65-125 200
CTB-1224 1200 2400 ≥1500 20 58-110 150~200
CTB-1230 1200 3000 ≥1500 20 70-140 150~200
Dry separator            
CTB-9018 900 1800 ≥2000-5000 25 40-60 200
CTB-9024 900 2400 ≥2000-5000 25 50-80 200
CTB-1021 1050 2100 ≥2000-5000 25 60-100 200
CTB-1024 1050 2400 ≥2000-5000 21 80-120 200
CTB-1030 1050 3000 ≥2000-5000 21 90-130 200
CTB-1224 1200 2400 ≥2000-5000 21 100-150 300


High Power Iron Dry Wet Magnetic Separator for SandHigh Power Iron Dry Wet Magnetic Separator for Sand Overview: Magnetic separator can be divided into dry magnetic separator and wet magnetic separator. The magnetic separator is the most widely used mining machine with advantages of simple structure, easy to operate, easy to maintain and so on. The magnetic separator is widely used in iron powder removal, and magnetic separator is also widely used in resource recovery, timber industry, mining, ceramic, chemical, food and so on. The magnetic separator is suitable for wet magnetic separation of magnetite, pyrrhotite, roasted ore, ilmenite and other materials with granularity below 3mm, and the iron removal of coal, non-metallic mineral, building material and other material.

High Power Iron Dry Wet Magnetic Separator for Sand

Structure: The magnetic separator is mainly composed of drum, roller, brush roller, magnetic system, tub and transmission parts. Cylinder is rolled welding by 2-3 mm stainless steel plate, and the end cover is aluminum casting connected by stainless steel screw and barrel. Motor regulates motor speed through the reducer, which drives the cylinder and magnetic roll do rotary motion. Magnetic system is open, installed in inside cylinder and all bared magnetic. Magnetic block is installed in the plate of yoke by stainless steel bolt, and the shaft of the yoke is out of the barrel. The end shaft is fixed with turn arm, which can adjust the magnetic system angle. The working area of trough is made up with stainless steel, and the frame and other parts of the cell body is welded with ordinary steel.

High Power Iron Dry Wet Magnetic Separator for Sand

Characteristics
1. Material adaptability
Drum sieve (rotary cylinder sieve) is widely used in all kinds of material screening, either inferior coal, slime, or bituminous coal and other materials can smoothly screening.
2. Simple and varied feeding mode
Feed port can be based on the actual set of juice whether it is a belt,funnel or other feeding methods,can be smooth feeding without special measures.
3. High screening efficiency
Provided with a comb type cleaning mechanism,improving the screening efficiency of the equipment no matter how dirty the materials are.
4. Large sieve component,easy to large-scale
Circle area of the screening of effective area is large, so that the material can fully contact with the screen, thus per unit time screen component is big. Because of its simple structure, convenient arrangement, new technology and mature characteristics and easy large-scale.

High Power Iron Dry Wet Magnetic Separator for Sand
5. Good working environment
Fully enclosed structure, material dust will not fly, to avoid the pollution of the work environment.
6. Low noise
Low speed and sealed isolation cover reduce the noise of the trommel screen.
7. Long lifespan and easy maintenance
Long service life,little wearing parts,small maintenance
8. Convenient maintenance
Equipment seal isolation on the cover can be taken apart, does not affect the normal operation of the machine, and the maintenance is very convenient.

High Power Iron Dry Wet Magnetic Separator for Sand
 
Type
(wet separator)
drum
diameter
(mm)
drum
length
(mm)
Magnetic intensity(Gauss) Rotating speed(r/min) Capacity (T/H) Motor Power(kw)
CTB-609 600 900 ≥1500 35 8-15 >100
CTB-612 600 1200 ≥1500 35 10-20 >100
CTB-618 600 1800 ≥1500 35 15-30 >100
CTB-718 700 1800 ≥1500 28.6 20-45 >100
CTB-918 900 1800 ≥1500 25.6 25-55 >100
CTB-921 900 2100 ≥1500 25.6 30-60 >100
CTB-924 900 2400 ≥1500 25.6 35-70 100~150
CTB-1018 1050 1800 ≥1500 22 40-75 Disinfection Device

Disinfection machine is a kind of machine that uses mechanical principles to produce physical or chemical disinfection elements to act on toxic substances to achieve the purpose of disinfection. It is widely used in medical and daily life fields. Its basic function: can kill and remove pet odor, smoke, sweat, odor, fiber, plankton mold, virus, plankton bacteria, mites, pollen, dust, dander, toluene, xylene, total volatility Organic matter (TVOC), benzene, formaldehyde, carbon monoxide, carbon dioxide and nitrogen oxides in automobile exhaust, etc.

Disinfection Device

Disinfection Device,Touchless Soap Dispenser,Soap Dispenser Pump,Sanitizer Gun Machine,Electrostatic Sanitizing Gun

Sung Precision Mould & Plastic Co., Ltd. , https://www.gdinjectionmolding.com