Tower Crane cabin is the control center of the crane and is attached to the slewing unit. In order to get to the tower crane cab, the operator must climb a series of ladders within the mast.
The movement of the tower crane is controlled from the operator's cabin. Within the tower crane cabin, you'll find the operator's chair with joystick controller, electronic monitoring devices, and communication systems. Many cabins come with climate control to ensure a comfortable work environment. The Operator Cabin for Tower Crane is part of the slewing assembly.
A cabin for a tower crane is a small enclosed space located at the top of the tower crane Mast Section or tower crane jib. It is where the crane operator sits and controls the crane's movements and operations. The tower crane cabin is typically made of steel or aluminum and is designed to provide a safe and comfortable working environment for the operator. It is equipped with controls, instruments, and communication systems that allow the operator to maneuver the crane, lift and lower loads, and communicate with other personnel on the construction site. The cabin is often equipped with heating and air conditioning systems to ensure the operator's comfort in various weather conditions. Safety features such as guardrails, harness attachment points, and emergency controls are also included in the cabin design to protect the operator in case of accidents or emergencies. Tower Crane Cab,Tower Crane Cabin Chair,Tower Crane Operator Cabin, Operator Cabin for Tower Crane,Driver's Cabin for Tower Crane SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com
Microcomputer control electronic universal testing machine
Mainframe structure
1. The gantry floor-standing structure absorbs the production technology of Japan Shimadzu and Germany Zwick.
2. The upper beam, the middle beam, the lower beam and the bottom panel form a frame structure through two pairs of ball screws, which ensures the rigidity of the frame structure.
3. Adopt all-digital AC servo motor to drive two pairs of high-precision non-gap ball screw to transmit through the noise-free synchronous toothed belt to ensure smooth loading, no gaps and high transmission efficiency.
Displacement measuring device
With 5000 line photoelectric encoder, the relative accuracy of displacement is ≤±0.5%
Test attachment
The high degree automation of the test process and dozens of different attachments can meet the testing requirements for a wide range of materials.
Test force measurement
1. High-precision, high-stability wheel type strain sensor with high-precision measurement and amplification system to ensure high precision of test force
2. Multiple sensors can be used according to user requirements to achieve a wider range of test force measurements
Limit switch
This series of testing machines has limit protection function, which automatically stops when the limit is reached.
Software system
The famous brand computer is used like Lenovo, and the control system software is based on the Windows XP operating system. It has the characteristics of fast running speed, clear interface and simple operation, which can meet the test requirements of different materials. Physical testing of various materials can be carried out according to international standards, national standards or industry standards.
Function Features
1. The speed of the moving beam during the test can be changed automatically according to a preset program or manually.
2. Automatically switch to the appropriate range according to the load size to ensure the accuracy of the measurement data, zero adjustment of the test force measurement, calibration and save, without any analog adjustment link, the control circuit is highly integrated
3. Automatic calibration: the system can automatically realize the calibration of the indication accuracy
4. Auto save: At the end of the test, the test data and curve are automatically saved.
5. Process test: test process, measurement, display and analysis are all completed by microcomputer
6. Batch test: Samples of the same parameters can be completed in sequence after setting once.
7. Test software: Chinese and English windows interface, menu prompts, mouse operation.
The main technical parameters
Main Specification
WDW
05Â Â 1Â Â 2Â Â 5Â Â 10Â Â 20Â Â 50Â Â 100
Structure
Single-arm structure
Gantry floor structure
Maximum test force
05Â Â 1Â Â 2Â Â 5Â Â 10Â Â 20Â Â 50Â Â 100
Test machine level
1 or 0.5
Operation Mode
Microcomputer control () Chinese or English software operation)
Force measurement range
2%-100% or 0.4%-100% of the maximum test force
Test force accuracy
±1% or ±0.5% better than indication value
Deformation display error
±1% or±0.5%
Speed adjust range
Standard model:0.01-500mm/min
High configuration:0.001-500mm/min
Test Stroke
≥600mm(could be customized according to customer need)
Test space adjustment mechanism
E-type imported AC servo motor, low noise synchronous belt drive
Meet the standard,
Accord to national GB/T2611 standard
Protection function
Overload protection, limit protection
Supply power
220V
Working environment
temperature -45 ° C, humidity 20% -80%
Fixture tool
According to the customer's requirements
Overall
450x260x1470mm
700x580x1720mm
700x580x1850mm
Weight
120KG
450KG
550KG
Â
Â
Â
Â
Â
Welcome to our factory to inspect!!
Â
WDW Series
Microcomputer control electronic universal testing machine
Mainframe structure
1. The gantry floor-standing structure absorbs the production technology of Japan Shimadzu and Germany Zwick.
2. The upper beam, the middle beam, the lower beam and the bottom panel form a frame structure through two pairs of ball screws, which ensures the rigidity of the frame structure.
3. Adopt all-digital AC servo motor to drive two pairs of high-precision non-gap ball screw to transmit through the noise-free synchronous toothed belt to ensure smooth loading, no gaps and high transmission efficiency.
Displacement measuring device
With 5000 line photoelectric encoder, the relative accuracy of displacement is ≤±0.5%
Test attachment
The high degree automation of the test process and dozens of different attachments can meet the testing requirements for a wide range of materials.
Test force measurement
1. High-precision, high-stability wheel type strain sensor with high-precision measurement and amplification system to ensure high precision of test force
2. Multiple sensors can be used according to user requirements to achieve a wider range of test force measurements
Limit switch
This series of testing machines has limit protection function, which automatically stops when the limit is reached.
Software system
The famous brand computer is used like Lenovo, and the control system software is based on the Windows XP operating system. It has the characteristics of fast running speed, clear interface and simple operation, which can meet the test requirements of different materials. Physical testing of various materials can be carried out according to international standards, national standards or industry standards.
Function Features
1. The speed of the moving beam during the test can be changed automatically according to a preset program or manually.
2. Automatically switch to the appropriate range according to the load size to ensure the accuracy of the measurement data, zero adjustment of the test force measurement, calibration and save, without any analog adjustment link, the control circuit is highly integrated
3. Automatic calibration: the system can automatically realize the calibration of the indication accuracy
4. Auto save: At the end of the test, the test data and curve are automatically saved.
5. Process test: test process, measurement, display and analysis are all completed by microcomputer
6. Batch test: Samples of the same parameters can be completed in sequence after setting once.
7. Test software: Chinese and English windows interface, menu prompts, mouse operation.
The main technical parameters
Main Specification
WDW
05Â Â 1Â Â 2Â Â 5Â Â 10Â Â 20Â Â 50Â Â 100
Structure
Single-arm structure
Gantry floor structure
Maximum test force
05Â Â 1Â Â 2Â Â 5Â Â 10Â Â 20Â Â 50Â Â 100
Test machine level
1 or 0.5
Operation Mode
Microcomputer control () Chinese or English software operation)
Force measurement range
2%-100% or 0.4%-100% of the maximum test force
Test force accuracy
±1% or ±0.5% better than indication value
Deformation display error
±1% or±0.5%
Speed adjust range
Standard model:0.01-500mm/min
High configuration:0.001-500mm/min
Test Stroke
≥600mm(could be customized according to customer need)
Test space adjustment mechanism
E-type imported AC servo motor, low noise synchronous belt drive
Meet the standard,
Accord to national GB/T2611 standard
Protection function
Overload protection, limit protection
Supply power
220V
Working environment
temperature -45 ° C, humidity 20% -80%
Fixture tool
According to the customer's requirements
Overall
450x260x1470mm
700x580x1720mm
700x580x1850mm
Weight
120KG
450KG
550KG
Â
Â
Â
Â
Â
Welcome to our factory to inspect!!
Â
Factory Direct Sale Computerized Electronic Universal Tensile Testing Machine/ Testing Machine/ Tester Could Be Customized/Pull Compression Strength Testing
Model NO.: WDW
Loading Method: Dynamic Load
Display: Digital
Control: Computer Control
Weight: 100-500Kg
Power Source: Customzied
Oil Cylinder Position: None
Maximum Test Force (Kn): 05 1 2 5 10 20 50 100
Test Machine Level: 1 or 0.5
Operation Mode: Microcomputer Control (Chinese or English Software
Force Measurement Range: 2%-100% or 4%-100% of The Maximum Test Force
Deformation Display Error: ±1% or±0.5%
Test Stroke: Could Be Customized
Working Environment: Temperature -45 ° C, Humidity 20% -80%
Protection Function: Overload Protection, Limit Protection
Meet The Standard,: Accord to National GB/T2611 Standard
OEM: Support
Trademark: Hiwoc
Transport Package: Plywood Case
Specification: 700x580x1720mm
Origin: China
Model NO.: WDW
Loading Method: Dynamic Load
Display: Digital
Control: Computer Control
Weight: 100-500Kg
Power Source: Customzied
Oil Cylinder Position: None
Maximum Test Force (Kn): 05 1 2 5 10 20 50 100
Test Machine Level: 1 or 0.5
Operation Mode: Microcomputer Control (Chinese or English Software
Force Measurement Range: 2%-100% or 4%-100% of The Maximum Test Force
Deformation Display Error: ±1% or±0.5%
Test Stroke: Could Be Customized
Working Environment: Temperature -45 ° C, Humidity 20% -80%
Protection Function: Overload Protection, Limit Protection
Meet The Standard,: Accord to National GB/T2611 Standard
OEM: Support
Trademark: Hiwoc
Transport Package: Plywood Case
Specification: 700x580x1720mm
Origin: China
WDW Series