For the high vacuum transformer
oil purification machine, we recommend you ZYD-I,ZYD-II. Why is it the high
vacuum?
Because it is equipped with
vacuum pump and the second vacuum pump,roots pump. The two vacuum pump can make
the vacuum status is very high, and the oil purifying time is very short. The working
temperature is not high.
ZYD-I,ZYD-II Double stages high
vacuum transformer oil purification machine works under the vacuum status,
it is a basic requirement for vacuum oil purification machine, if the working
vacuum reach to -0.099MPa, this machine can satisfy the degass demand. If we
use this kind machine to degass process for the insulating oil, transformer oil,
the gas content will reduce or to 0.1%. If the oil contains much gas, we can
see it through the vacuum separator viewer, because the oil goes into the
vacuum tank which is negative pressure, the gas will transgress under the press
action. The transformer oil purification machine can easy pump out that gas to
air.
Especially for the online
working, we recommend you ZYD-I and the ZYD-II machine type. Both of the two
types of the machines are most suitable for the on-site working.
Others Series Products
11.Die Casting Machine Capacity from 50 tons to 3000 tons.
Other Series Products Aluminium Die Casting Accessories,Mould Part Series Products,Die Casting Lamp Part,Alloy Die Casting Series Products Ningbo Bowei Mould Metal Products Co., Ltd , http://www.bwmoulds.com
1.High Quality Die Casting Production series products.
2.Cast aluminum die cast parts in many Aluminum Die Casting for Auto Parts, Aluminium Die Casting for Communications, Lamp Part Series , Water Pump Part Series, Power Tool Series , radiator part series, anti-static flooring products and Other Series Products.
3.Die casting consulting for Aluminum Die Casting part design and die casting tooling.
4.High quality surface on your aluminum die casting products.
5.Close dimensional tolerances on products die casted in aluminum.
6.Production on aluminum die cast parts will begin in less than two weeks typically..
7.Competitively priced aluminum diecast parts.
8.Various sizes and types of aluminum diecasting capabilities for your needs.
9.A360, A380, A383 and A413, and all Aluminum Die Cast Alloy Parts comply with the EU RoHS standards.
10.Aluminum Sand Casting Parts to Aluminum Die Casting Part conversions.
