At present, the reason why many cities still have serious environmental pollution, and the governance of the city is not in place, mainly because ordinary flooding vehicles in the past are often used to sweep out and clean up the dirt and dust on the road. In fact, it is worth mentioning that the most advanced 10-party sprinklers not only adopt remote control and intelligent mobile facilities for management and control in all aspects, but also have very high output power, and work efficiency is also much more effective. Then talk about the characteristics of the 10 square sprinkler and some of the more prominent advantages in the end. In the past, some common sprinklers had a mode of scrubbing the dirt on the road and rubbish with the brush. As a result, it was easy to throw dust on the road in the air, and the air quality would be reduced. For the human lungs, There will be a big negative impact. Instead, in the process of clearing the road surface, the 10-way sprinkler does not take the form of jets. Instead, it adopts a negative pressure air inhalation method to concentrate the dust, dirt and dirt on the road into the vehicle cavity. in vivo. In this way, not only the working rate is very fast, but also the pollution in the air can be well managed. At the same time, in the process of controlling various system architectures, such as filtering dust collection frameworks, dust collection system architectures, dust devices and remote control architectures, and hydraulic architectures, etc., they are all adopting smart and unified methods, so they do not require multiple operations. Only a single person can operate easily in the control room. However, many people are skeptical about the way that 10 square sprinklers waste water resources. Actually, before the delivery of the 10 square sprinklers, they have not only limited the working speed, but also the effective working area and the water jet range, and so on. test. Moreover, the waste of water resources has also been reduced to a minimum level. Instead of using the water column spray pattern in the past, the 10 square sprinkler adopts a spray pattern of water spray. In this way, fine particles in the air and dust can aggravate the quality and allow them to settle on the ground. In this way, the cleaning on the ground can be achieved in one step, replacing many times in the past. Moreover, the market demand for the 10 party sprinklers in various large cities is also very high, and once it has reached the supply shortage. The Rock Drill works according to the principle of impact crushing.When working, the piston makes high frequency reciprocating motion, continuously impinge the drill bit tail.Under the action of impact force, the rock is crushed and cut into a certain depth by a wedge shaped drill head, forming a concave mark.When the piston returns, the solder rotates at a certain Angle, and the piston moves forward.The fan shaped block between the two notches is sheared by the horizontal force produced by the drill head.The piston continuously impinges on the end of the drill and continuously inputs compressed air or pressure water from the core hole of the drill to discharge the rock slag out of the hole, which is to form a circular hole with a certain depth Pneumatic Rock Drill,Pneumatic Rock Hammer Drill,Pneumatic Manual Rock Drill,Pneumatic Air Rock Drill Jining Dongda Electromechanical Co.,Ltd. , https://www.coal-mine-equipment.com