Waste plastic washing recycling machines are suitable for work highly polluted materials, which must be separated from contaminants before moving to subsequent stages of processing.
The type of material that can be processed:
1. Film with various thickness coming from selective waste collection, industrial waste, post consumer material, agriculture    etc.
2. Rigid materials such as PP PE,HDPE LDPE, containers, electric batteries, milk bottles, bags, sheets, production waste, etc.
3. Those contaminated waste will be perfectly cleaned, size-reduced and dried ready for the re-granulation phase or the       densification phase.
Features and Advantages of Waste Plastic Washing Recycling Machine
1. This whole production line is used to crush, wash, dewater and dry PP, PEÂ Film and rigid plastic.
2. It takes the advantages of simple structure, easy operation, high capacity, low energy consumption, safety,                reliability, etc.
3. This whole production line is automatic controlling.
4. Production capacity: 200-1000kg/h.
5. After drying the water content can reach 1-5% (depends on material).
Â
Â
8. The whole line can be designed on the basis of how dirty the flakes are, we can accord to custom's                       requirements to choose suitable machines.
Brief Introduction of Plastic washing recycling process:
In PE and PP washing line combines "sorting, grinding, washing, drying and storing" processes in one line. This means dirty and mixed waste materials become a raw material for re-use throughout the process.
Following procedures are integrated in our washing lines or can be added additionally:
- Material feeding with metal detection
- Material size-reduced by wet type granulator
- High speed of friction washer
      This also can be used in special cases where the friction washer can be installed in front of or after washing tank and        hydro cyclone units.
- Sink-float washer
    This large tank is filled with water which has a density of 1 g/cm3.
     Depending on the application, additives can be added to slightly augment water's density. Material that goes into       this water tank with density greater than 1 g/cm3 will sink to the bottom while materials with density less than
    1 g/cm3 will float.
    In the case of PP/PE films, PP/PE films have a density of around 0.93 g/cm3 which makes it float while other various       contaminants will sink to the bottom where it is collected and removed via a conveyor system.
- Mechanical drying unit
- Thermal drying system
Waste water treatment combined with waste plastic washing recycling machine:
The dirty water is collected in a pit and any contamination larger than appr. 0.1 mm is removed. The screened water is stored in a sedimentation basin for the sedimentation of light contamination; the result is circulation water. A pump conveys the circulation water back into the plant.
The dirty water from a washing process is collected, cleaned and then re-circulated. That significantly reduces the amount of fresh water that would have been needed.
Machine list of Plastic washing line:
Â
| No. | Description of goods | Quantity |
| 1 | Belt Conveyor | 1 set |
| 2 | Single-shaft shredder | 1 set |
| 3 | Belt conveyor | 1 set |
| 4 | Crusher | 1 set |
| 5 | Screw feeder | 1 set |
| 6 | High speed Friction Washer (Sand, small stone, mud remover) |
1 set |
| 7 | Screw Feeder | 1 set |
| 8 | Deposit& Floating Washing Tank | 1 set |
| 9 | Screw Feeder | 1 set |
| 10 | Centrifugal Dewatering machine | 1 set |
| 11 | Storage Silo | 1 set |
| 12 | Control Cabinet | 1 set |
| Machines could be increased or reduced depending on material. | ||
Further specifics and more details would be offered upon your enquiry, we assure you of our best quality and competitive price.
Â
Fiber Laser Metal Sheet Cutting Machine
It can cut all kinds of metal plates, pipes, and is mainly used for rapid cutting of stainless steel, carbon steel, manganese steel, galvanized sheet, various alloy plates, rare metals, etc.
Widely used in: kitchen appliances, sheet metal chassis cabinets, mechanical equipment, electrical equipment, lighting hardware, advertising signs, auto parts, display equipment, various metal products, sheet metal cutting processing and other industries.
Principle of fiber Laser Cutting Machine
The fiber laser cutting machine adopts the international advanced fiber laser to output a high-energy density laser beam, and focuses on the surface of the workpiece, so that the area irradiated by the ultra-fine focus spot on the workpiece is instantly melted and vaporized, and the spot illumination is moved by the numerical control mechanical system. Automatic cutting is achieved. It is a high-tech equipment integrating advanced fiber laser technology, numerical control technology and precision mechanical technology.
Fiber laser cutting machine features
1. Can blow air to cut various metal sheets;
2. High performance, imported original packaged fiber laser, stable performance and long service life;
3. High speed, from efficiency, the speed of cutting thin plates can reach tens of meters per minute;
4. The laser is maintenance free;
5. The cutting edge has good quality, small deformation, flat appearance and beautiful appearance;
6. Adopting imported guiding transmission mechanism and servo motor, the cutting precision is high;
7. It is free to design all kinds of graphics or text for instant cutting, which is simple, flexible and convenient.
Fiber Laser Cutting Machine,Fiber Laser Cnc Cutting Machine,Commercial Laser Cutting Machine,Ccd Camera Laser Cutting Machine
Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com