Turbine flowmeters are velocity flowmeters, also called impeller flowmeters. They are one of the more sophisticated high-precision instruments in current flowmeters. Then, the turbine flow meter is made up of several components. In the following, the technical Xiaobian of the Shunda flow meter will explain the structural analysis of the turbine flow meter. Turbine flowmeters generally consist of the following five parts. The first is the body of the watch. The material of the watch body is generally steel or cast and its ends are flanged. Small-caliber gauges also have threaded connections. The second component is the measurement. The turbine flow meter can also use an external lubricant pump to lubricate the bearing, but be careful not to overdo it. The third is the counter, which has important information displayed on the counter panel. The fourth is the rectifier, which is used to make the fluid flow in the turbine flow meter in a regular state, thereby eliminating the impact of disturbance on the metering unprofitable. The fifth is a magnetically coupled transmission device that separates the counter portion in the atmosphere from the gas being measured and transfers the rotation of the measurement assembly to the counter. The above is about the analysis of the composition of the turbine flowmeter. The technology of the turbine flowmeter has been very mature. Especially in the field of natural gas measurement, it has its own unique advantages, good stability and high measurement accuracy. The favor. If you have any other requirements or problems related to the flowmeter, you can contact the Shunda flowmeter manufacturer and we will be happy to help you. Wooden Photo Frames,Wooden Multi Photo Frame,Custom Wood Picture Frames,Wooden Hanging Photo Frames Hangzhou Freefish Import & Export Co., Ltd. , https://www.fltdframe.com