Model NO.: 2CPV
Tube Od of Flaring: 3-50 mm
Tube Od of Beading: 6-45 mm
Tube Material: Titanium Alloys, Stainless Steel, Aluminum Alloy
Rotation Axis: Asynchronous Motor, 0.75kw
Trademark: Hartco
Transport Package: Wood
Specification: OD6-50mm
Origin: Shanghai
HS Code: 8461909000
Model NO.: 2CPV
Tube Od of Flaring: 3-50 mm
Tube Od of Beading: 6-45 mm
Tube Material: Titanium Alloys, Stainless Steel, Aluminum Alloy
Rotation Axis: Asynchronous Motor, 0.75kw
Trademark: Hartco
Transport Package: Wood
Specification: OD6-50mm
Origin: Shanghai
HS Code: 8461909000
2CPV Table Model Tube End Finish MachineDescription: Table Model Tube End Finish MachineModel: 2CPVApplication:Used for deburring,flaring,Beading for Inside and outside of metal round tube end.Introduce:Using the tube end-finishing machines, the ends can be prepared with a bead or flare, or simply deburred and squared. Each machine is capable of performing all of these functions -a change of tooling is all that is required to switch from one function to another.Main Specification:
- Dimensions: Long X Wide X High (excluding protruding parts) =460X650X380mm
- Weight: 160 kg
-
Power supply: 220V±10%, 50Hz/60Hz, single phase
- Power: 1 KW
- Air pressure: 0.4-0.8MPa;
- Clamping mode: pneumatic;
-
Clamping force: >=5KN;
- Rotation axis: asynchronous motor, 0.75kw;
-
Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
-
Rotation axis deflection: ≤0.01 mm;
Capacity:
- Tube OD of chamfer/squaring/deburring: Φ6-50mm;
-
Tube WT of chamfer/squaring/deburring: ≤10mm;
- Tube OD of flaring: Φ 3-50 mm;
-
Tube WT of flaring: Stainless steel 0.4 ~ 1mm, Aluminum alloy 0.5 ~ 1.5mm;
- Flaring method: eccentric inner diameter rotary swage;
- Tube OD of beading: Φ6-45 mm;
-
Tube WT of beading: stainless steel: ≤0.5mm, aluminum alloy: ≤ 1mm;
- Beading method: inner diameter rotary swage;
- Tube min clamp: 10mm (flare tube is based on material and wall thickness);
- Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;
Features:
- One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
- After quick change dies, it can complete the tube flaring processing and beading.
- Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
- Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
- Operating lever and clamping cylinder joint together, when pull the operating lever, the cylinder clamping automatic clamping tube, then the main shaft forward, after the processing complete, release lever, spindle retreat, cylinder clamping automatically open.
-
Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
- Tube feeding length positioning function, ensure tube process length and repeat precision.
- Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
- The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
Main Components:
- The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
- Variable frequency control of motor, to achieve the spindle high precision control.
- Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
- The clever design chip groove in clamp, lead the dust smoothly into waste box.
- The mechanical lever of connecting rod reduces the feed speed, operation more smooth and efficient.
- Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
- Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
- Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.
Tooling:
-
Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
- Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
-
The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness.
-
Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading.Â
Â
Â
2CPV Table Model Tube End Finish MachineDescription: Table Model Tube End Finish MachineModel: 2CPVApplication:Used for deburring,flaring,Beading for Inside and outside of metal round tube end.Introduce:Using the tube end-finishing machines, the ends can be prepared with a bead or flare, or simply deburred and squared. Each machine is capable of performing all of these functions -a change of tooling is all that is required to switch from one function to another.Main Specification:
- Dimensions: Long X Wide X High (excluding protruding parts) =460X650X380mm
- Weight: 160 kg
-
Power supply: 220V±10%, 50Hz/60Hz, single phase
- Power: 1 KW
- Air pressure: 0.4-0.8MPa;
- Clamping mode: pneumatic;
-
Clamping force: >=5KN;
- Rotation axis: asynchronous motor, 0.75kw;
-
Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
-
Rotation axis deflection: ≤0.01 mm;
Capacity:
- Tube OD of chamfer/squaring/deburring: Φ6-50mm;
-
Tube WT of chamfer/squaring/deburring: ≤10mm;
- Tube OD of flaring: Φ 3-50 mm;
-
Tube WT of flaring: Stainless steel 0.4 ~ 1mm, Aluminum alloy 0.5 ~ 1.5mm;
- Flaring method: eccentric inner diameter rotary swage;
- Tube OD of beading: Φ6-45 mm;
-
Tube WT of beading: stainless steel: ≤0.5mm, aluminum alloy: ≤ 1mm;
- Beading method: inner diameter rotary swage;
- Tube min clamp: 10mm (flare tube is based on material and wall thickness);
- Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;
Features:
- One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
- After quick change dies, it can complete the tube flaring processing and beading.
- Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
- Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
- Operating lever and clamping cylinder joint together, when pull the operating lever, the cylinder clamping automatic clamping tube, then the main shaft forward, after the processing complete, release lever, spindle retreat, cylinder clamping automatically open.
-
Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
- Tube feeding length positioning function, ensure tube process length and repeat precision.
- Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
- The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
Main Components:
- The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
- Variable frequency control of motor, to achieve the spindle high precision control.
- Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
- The clever design chip groove in clamp, lead the dust smoothly into waste box.
- The mechanical lever of connecting rod reduces the feed speed, operation more smooth and efficient.
- Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
- Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
- Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.
Tooling:
-
Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
- Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
-
The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness.
-
Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading.Â
Â
Â
Pulverizer Machine
Pulverizers are machines that pulverize large solid materials to the required size.
According to the size of the crushed material or the crushed material, the mill can be divided into coarse crusher, medium crusher, fine mill and superfine mill. There are four kinds of external forces applied to the solid in the grinding process: pressing, cutting, impact and grinding. Press rolling is mainly used in coarse and medium crushing, suitable for the crushing of hard materials and bulk materials. Shearing is mainly used in fine crushing, suitable for the crushing of ductile materials. Impact is mainly used in medium crushing, fine grinding, ultrafine grinding, suitable for crushing brittle materials. Grinding mainly in fine grinding, ultrafine grinding, suitable for small pieces and fine particles.
The crusher makes use of the high speed relative motion of the movable tooth plate and the fixed tooth plate, so that the crushed object can be crushed by the comprehensive action of tooth impact, friction and the impact between the materials. The crusher is suitable for crushing Chinese herbs, precious medicinal materials, ores and chemical raw materials in small batches in various varieties, alloys, metallurgy, geology, scientific research and other units.
The pulverizer machine has the advantages of simple structure, solid, stable operation and good crushing effect. The pulverized material can be discharged directly from the grinding chamber of the main machine. The particle size can be obtained by replacing the mesh screen with different aperture. The powder collecting chamber adopts the completely closed silencer structure, which can effectively reduce the working noise. In addition the machine is all stainless steel. The inner wall of the casing is machined to achieve smooth surface, which changes the phenomenon of rough inner wall and powder accumulation of the previous models, so that the production of drugs, food, chemical industry and so on is more in line with national standards and meet the requirements of GMP.
Pulverizer Machine,Crushing Machine,Milling Machine,Grinding Mill, Grinding Machine
JIANGYIN CITY XUAN TENG MACHINERY EQUIPMENT CO.,LTD , https://www.machineryxuanteng.com