Three-roll gates , also known as three-bar gates, three-bar gates, are one of the intelligent pedestrian passage management equipment, which is mainly suitable for all kinds of public places that require pedestrians to pass in an orderly manner. The non-angular design of the three-roller gate not only prevents personal injury in accidental collisions, but also ensures the safety of pedestrians. The three-roller gate adopts an all-stainless steel shell, and all the internal components of the chassis are treated with anti-corrosion treatment, which is durable. The good operation of the three-roller gate is inseparable from maintenance work. So, how to properly maintain the tripod gate?
1. External maintenance: Since most of the three-roller gates are made of stainless steel, the surface is easy to rust and cause spots. It needs to be cleaned once a week. The exterior of the chassis can be polished with a soft cloth and fossil powder and coated with anti-rust oil. Do not wipe the newly applied anti-rust oil by hand, otherwise it will destroy the anti-rust effect of the surface. After 3 to 5 hours of natural drying, it can be touched with hands.
2. Circuit maintenance : According to the previous use of the three roller gate users, especially the maintenance and maintenance of the electric control part, check whether the wire is aging and whether the power supply is exposed and need to be replaced in time. Refer to the instructions and carefully check the parameters of each component. If you find a problem, be sure to find a professional to help replace individual electronic components.
3. Movement maintenance: Open the upper cover to cut off the power supply and clean the power supply dust. In order to reduce the resistance when the solenoid valve moves left and right, grease or oil should be added to the cleaned machine rotating part for maintenance of the movement, because the movement is The heart of the machine is maintained at least once a month. Check whether the machine fasteners are loose, tighten the fasteners, and check the wear of the vulnerable parts.
Steel Casting Valve Guards
All cylinders with a threaded necking are required to have cylinder caps in place when being stored full or empty. Compatible With Select cylinders, Product Type Cylinder cap. These caps have the durability to withstand cylinder falls and keep the valve protected Cylinder valve protection is paramount when moving or storing a cylinder.
Standards are engraved on the body. They can be engraved with marking, logo, etc.
They are supplied:
- raw
- zinc plated
- powder painted
- zinc & powder painted
Steel&Cast Iron Cylinder Guards,Steel Guards,Cylinder Valve Guard,Customized Steel Guards
Hangzhou Qizheng Trading Co., Ltd. , https://www.gascylindercap.com