The oil tanker is an independently detachable vehicle that transports oils. The tank material is made of metal, glass fiber reinforced plastic, and plastics. In order to ensure no breakage or leakage during use, the tanker must be designed with sufficient strength. The interior of the tanker should be equipped with anti-shock, inlet and outlet valves. Individual tanks must be configured as required. Insulation facilities and flowmeters. In addition to common oil tankers for transporting crude oil and refined oils, edible oils, alcohol, and water are common transport media for tankers. According to the needs of transportation, there are also cases where different kinds of oil products are transported by one oil tanker. At this time, it is necessary to use separate oil storage trucks, and different types of oil can be loaded according to different sub-bins to realize foods. Simultaneous transportation with chemicals. Like ordinary freight vehicles, in order to meet the normal transportation requirements, the oil tanker also needs regular inspection and maintenance in use. First of all, in order to ensure that the transportation medium is not contaminated, the tank car body and the oil delivery system should be cleaned regularly, and the oil port and joint part should be regularly lubricated to prevent wear during loading and unloading. Secondly, after the oil pipeline is used up, it is cleared in time to ensure that the pipeline is clean. It cannot be said that the pipeline is due to different types of transport medium. In addition, the use of the oil pump of the oil tanker should strictly follow the instructions and regularly maintain the oil pump. In addition, when refueling, pay attention to keep static conduction well and avoid the risk of static electricity. Finally, the safety valves and strainers of oil tankers are frequently inspected and cleaned, and loose and necrotic parts are replaced in time to ensure that the tanker is in good working condition. The oil tanker may encounter various problems in the course of operation. The user should fully understand the use status and technical parameters of the vehicle, and should not panic when there is a problem. In particular, the transportation of crude oil and refined oil is inflammable and explosive. When it comes to articles, it is necessary to strictly abide by the rules for the use of oil tankers, not to drive dangerously, to drive with fatigue, to put the safety of life and property of others and others first, and to ensure safe travel. Bitumen Heating Storage Equipment Asphalt heating storage equipment is an important road construction equipment, mainly used to heat and store asphalt in order to carry out road construction and maintenance when needed. The equipment has the characteristics of high efficiency, safety and environmental protection, and can provide stable asphalt supply for road construction. Bitumen Heating Storage Equipment,Bitumen Tank Container,Gas Thermal Oil Heater,Asphalt Storage Tank Equipment BituRock Science & Technology (Jiangsu) CO., LTD , https://www.biturockplant.com
Asphalt heating storage equipment is mainly composed of heating device, storage tank and control system. The heating unit uses oil or gas burners to transfer heat to the asphalt to heat it to the proper temperature. Storage tanks are large containers used to store heated asphalt, generally made of high-temperature resistant materials. The control system is responsible for monitoring the operating status of the equipment and the temperature of the asphalt to ensure the safe and stable operation of the equipment.
The heating principle of asphalt heating storage equipment is to transfer heat to asphalt through thermal conduction, so that it is heated. Heating devices are generally divided into direct heating and indirect heating in two ways. Direct heating is the use of the burner directly into the storage tank, hot air through the contact of hot air with the asphalt to heat it. Indirect heating is the use of heat exchangers to heat the asphalt in the storage tank without direct contact with the air. The two heating methods have advantages and disadvantages, and need to be selected according to the actual situation.
Asphalt heating storage equipment heating speed, can quickly heat asphalt to the use of temperature, improve production efficiency. At the same time, the equipment also has environmental protection characteristics, reducing exhaust gas and smoke emissions, reducing the impact on the environment. In addition, the operation of asphalt heating storage equipment is simple and easy to maintain, which can meet the needs of various road construction and maintenance projects.
In short, asphalt heating storage equipment is an important road construction equipment, with high efficiency, safety, environmental protection and other characteristics. It can provide a stable supply of asphalt for road construction, improve construction efficiency, reduce the impact on the environment and waste of resources. The equipment has a wide application prospect in the field of road construction.