1.Vertical mold-shut and Vertical injection,apply to enchase molding.
2.2 barrer temperature control zones.Lndependent settings for screw speed,injection pressure,and back pressure assire excellent REPEA-TABILITY and precise contro.
3.Stationary lower half with hydraulic ejection assures a vibration free work area.
4.Low pressure control standard.
5.Material pipe can be elevated.
6.The special oil road design,model the efficiency to raise 30% above.
LED Product Machine,Production line Led,Led Injection Moulding Machine,Led Machine Changzhou Yuehai Zanyang Machinery Sales Co., Ltd. , https://www.canyangmachine.com
1.Products are manufactured in accordance with all relevant gasket standards.
2.All types of Spiral wound gaskets can be manufactured, CG, CGI, R, RIR, etc.
3.Our production capacity is 150,000 pcs per month.
4.Material combinations for all operating conditions.Â
Â
Sunwell seals spiral wound gaskets have 4 types:
1.SW600-R Basic Type
Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.
2.SW600-IR Inner Ring Type
Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.
3.SW600-CGÂ Outer Ring TypeÂ
Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.
Â
4.SW600-CGI Inner & Outer Rings Type
A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.
Spiral wound gaskets
More information of spiral wound gaskets,please contact with sunwell seals,thanks.
Standard Spiral Wound Gasket Basic Type
Model NO.: SUNWELL-SW600
Product Name: Spiral Wound Gasket
Color of Gaskets: According The ASME Standard
Certificate: Dnv ISO9001,SGS
Quality: High Level of Spiral Wound Gasket
Trademark: SUNWELL
Transport Package: Wooden Case for Spiral Wound Gaskets
Specification: according your request
Origin: Ningbo, China
Star product:Spiral wound gasket from Sunwell seals/CG/CGI/IR/R Type