[China Instrument Network Instrument R&D] On December 3, the acceptance of the “New Multi-functional 1m Laser Longer Meter†project acceptance meeting was held in Changzhou City, Jiangsu Province. The acceptance team was headed by Academician Ye Shenghua of Tianjin University and Ma Jiongqun, a researcher at the Beijing Great Wall Metrology and Measurement Technology Research Institute of China Aviation Industry Corporation, served as the deputy leader. The members included Professor Mao Zhenhua of the Zhejiang Institute of Metrology and Shandong Research Institute of Metrology Science. Zhao Dongsheng, professor of the Anhui Institute of Metrology, Jinmei Feng, senior engineer at the Institute of Metrology, Jilin Province, and Dou Yanhong, professor at the Jilin Provincial Institute of Metrology.
Acceptance meeting site. The picture is from the Changzhou Bureau of Quality and Technical Supervision.
The acceptance team listened to the project's study summary report and test report, reviewed the technical documents submitted by the project team, conducted on-site examinations, reviewed the certification materials, and conducted inquiries. After full discussion, the acceptance team believes that the inspection team has submitted complete acceptance materials that meet the acceptance requirements. The project team has developed a multi-functional new type of laser interference ratio meter device, a set of automatic measurement software for line scales, and a set of automatic dynamic calibration software for displacement sensors. The verification and calibration of high-profile lines and the dynamic measurement of laser interferometers and displacement sensors are realized. Uncertainty of measurement of line scale, dynamic measurement uncertainty of displacement sensor, repeatability of laser interferometer dynamic comparison measurement and other technical indicators are all better than the contract indicators; high-precision air-float marble rails have been developed; design has completed a long work A reflective and transmissive photoelectric aiming microscope with a distance of up to 28.5mm; a synchronous trigger circuit with a synchronous triggering interval of 10nm is designed and based on the principle of edge triggering, the triggering error is less than 1nm; on the basis of the comparator, the displacement sensor is integrated Laser interferometer and other dynamic measurement technologies have established a scalable, multi-functional, integrated, integrated high-speed and high-precision synchronous measurement platform;
The project has completed the assessment indicators specified in the project book, and the project results are of good scientific and practical nature. The acceptance expert group unanimously agreed that the project passed acceptance.
Song Shuying, deputy director of the China Institute of Metrology, Sun Rushan, director of Changzhou Quality Supervision Bureau, and Ji Weiqiang, deputy director of the Changzhou Quality Supervision Bureau, attended the acceptance meeting.
(Original title: "The new multi-functional 1 meter laser ratio meter" science and technology project successfully passed the acceptance)
High Pressure Hydraulic Pump and crimper
The super high pressure hydraulic pump is a construction tool for wire crimping, usually combined use with wire hydraulic crimper head. It is applied to provide power for the busbar machine, the hydraulic compressor, and other construction machinery, which is operated in the wild field in electric power, railway, rescue, construction and other industries.
Split hydraulic crimping tool is a necessary tool for wire connection and crimping in power industry in line capital construction and line maintenance. Connecting with ultra high pressure pump, the hydraulic crimper head is used for pressing of overhead steel-cored aluminium strand and intermediate connecting pipe of steel strand and tension clamp of transmission line above 110KV.
Features:
1. Large oil capacity, the double acting gasoline engine hydraulic pumpsuitable for large capacity crimping tools and long time operation without engine overheating.
2. High and low double-speed automatic switch, well fit for 60T/100T/200T/300T crimping tools.
3. Rated output pressure 70Mpa, maximum up to 80Mpa.
4. Retract pressure protection system and overflow protection valve, safe and reliable.
5. Simple structure, easy operation, light weight.
6. Low noise, environment friendly.
7. Equipped with pressure gauge for easy output confirmation.
8. Double-loop design with high-low voltage and double-speed automatic switching system.
9. The double acting high pressure hydraulic pump has the function of adjusting pressure and keeping pressure, and has a good protective effect on crimping equipment.
10. Hydraulic oil tank is made of high strength alloy aluminium, which has good heat dissipation performance.
High Pressure Hydraulic Pump, Double Acting High Pressure Hydraulic Pump,Double Acting Gasoline Engine Hydraulic Pump, Hydraulic Crimping Tool, Hydraulic Crimper Head, Hydraulic Crimper
Taizhou Haoxin Electric Power Machine Co., Ltd. , https://www.hxstringingequipments.com
