In recent years, we have seen the rapid development of science and technology in our great motherland. This made me feel extremely proud for me as a Chinese. With the advancement of technology and the progress of people, we will join the Chinese cutting machine trading network to make progress together. Join the hotline, we look forward to your call. Details:/ Bhp Hydraulic Gear Pumps,Low Noise Gear Pumps,Hydraulic Pump,Alloy Body Gear Pump Huaian Hy-waloil Machinery Co.,Ltd , https://www.hywaloil.com
With the development of science and technology, the development of CNC plasma cutting machines is also very mature in the country. Its characteristics are fast cutting speed, especially the efficiency of cutting thin plates. However, there is always a problem when everyone faces the problem of cutting heat. In order to solve this problem, some advantages and characteristics of plasma cutting machines used by our company have adopted plasma underwater cutting operations. In particular, the technology of CNC underwater plasma cutting machines is increasing. We all know that dry plasma cutting can easily generate large amounts of metal dust, unpleasant gases, and strong glare. Some of the cutting incidental problems can cause headaches for customers, in order to solve this problem. The advantages of underwater plasma cutting machine are reflected. Underwater plasma cutting machine working principle is that underwater plasma cutting can remove dust, a water level can be raised and lowered cutting platform, when the beginning of the cutting, the inlet valve opens the fan water supply bed airbag inflated, the water level rises quickly, when the water just flooded the steel plate close the pneumatic Valve, the water level stops moving, smoke and dust produced when cutting are all absorbed by water. When the cutting is finished, the outlet valve opens and the deflated water level of the airbag descends so that the operator can mark and cut the material. This dust removal method is currently the best dust removal method for dust removal effect, but due to the influence of water, the cutting speed, cutting ability, and surface The degree of finish is lower than that of dry cutting, and the power consumption when cutting steel plates of the same thickness is about 15% higher than that of dry cutting. The manufacturing cost of the water bed is relatively high. Of course, this aspect is also constantly exploring and improving. In addition, the underwater plasma cutting must be equipped with a collision avoidance device or an arc voltage automatic height-adjustment device. When underwater cutting, the surface of the water due to the arc striking and the impact of cutting gas can easily make the water turbid, and the naked eye cannot see the cut at all. The position of the gun and the distance from the torch to the height of the steel plate. During the cutting process, if the deformed steel plate protrudes, it will collide with the cutting torch, causing the torch to break or damage. When cutting, the height of the horizontal plane from the steel plate is 3-5mm. can. The most obvious characteristic of the underwater plasma cutting machine in terms of its design is that the beam adopts a wide-body reinforced box structure and has a beautiful appearance. The end frame adopts a low center of gravity structure, symmetrical structure, good stability, and all welding are stress-relief processing, ensuring the overall rigidity and good dynamic balance.
[I can't think of it. I can't do it. Change your style from now on. Opening the Chinese cutting machine trading network is equivalent to opening up your wealth road, come and click on the website now! 】