In order to ensure the quality and effect of copper selection in the beneficiation equipment, it is necessary to analyze the ore before the selection to ensure that our expected results are achieved. The following is an optional test of copper ore. The copper ore selectivity test is also the same as other ore optional tests. The direction of the research depends mainly on the composition and characteristics of the minerals contained in the ore. In the study of ore composition, in addition to visual analysis and microscopic analysis, phase analysis is also performed. The phase analysis of copper ore usually includes the following effects. The above analysis concluded that understanding the physical and chemical properties of the ore has a major impact on the production efficiency of the beneficiation equipment. This product(concrete batching plant) is a fully automatic concrete mixing equipment consisting of five systems of mixing, electrical control, storage, conveying and weighing. Concrete Batching Plant,Ready Mix Concrete Batching Plant,Stetter Concrete Batching Plant,Portable Concrete Batching Plant Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.sdjsseriesconcretemixer.com
Water intrusion method was carried out for the determination of copper sulfate type copper. 50 g of dry ore finely ground to 1 mm was placed in a glass bottle, and 250 ml of distilled water was added and stirred for one hour. After clarification, the solution was poured onto a dry filter paper and the filtrate was filtered into a dry glass. A portion of the filtrate (50-100 mL) was taken for analysis of copper. A qualitative reaction test was carried out on the copper in the filtrate, for which a drop of the filtrate was dropped onto the glass of the microscope, and a drop of a yellow blood-like solution was dropped to the vicinity. Both drops are treated with steam of ammonia and then combined, and a yellowish or reddish crystalline CU(NH4), FE(CN) will appear with the vapor of ammonia. (can be observed with a microscope). When a drop of acetic acid is added, the crystals are dark reddish, indicating that at least 0.1-0.2 mg of copper is contained per liter.
Features of concrete batching plant
1.It is assembled by building blocks, which is short, quick and convenient.
2.It is convenient and quick to use the cylinder discharge or electric push rod to discharge.
3.A variety of mixing processes, highly automated, high production efficiency,
4.Environmental protection and energy saving, using pulse dust removal, recycling waste-water for reuse