When seasons change in spring and summer, it is easy to leave some germs and viruses in the LED advertising vehicle. Whether it is for the health and safety of the driver or for the protection of the vehicle, it should be given a led advertisement during the season-changing process. The propaganda car is ready for seasonal maintenance. In fact, whether it is for different vehicles or for the human body, the maintenance must be done. The maintenance vehicle can be used as a routine inspection of the skin, respiratory system and other organs for the body, so that it can be timely Find problems and solve problems, better maintenance work and maintenance work. 1. Carefully inspect the air-conditioning system of the led advertising vehicle , piping, compressor seals, and joints for any oil stains. If it is oily, it means that the closure at this place was not done well and there was a leak of refrigerant. 2. When the air conditioner in the car is turned on, use the ear to stop the engine speed. If there is a noticeable change in the engine speed, then the compressor clutch is not working properly. Then look at how the refrigerant is operating. If the glass sight glass has bubbles continuously and the air outlet is not cooled, then it shows that the refrigerant has leaked. If the glass sight glass is in the form of a misty oily fringe, it shows that the refrigerant and all leaked. 3, led advertising vehicle air conditioning is not cooling the reasons for the occurrence of many, for example, electrical control failure, the compressor magnetic clutch failure and so on. 4, check the brake system, first of all feel the brake system there are some abnormal conditions, the reaction is not still sensitive. In the inspection of the tire there is no breakage or some foreign body, check the tire's wear mark line, if the tire's wear has reached the mark line, it should be timely replacement of the tire. 5, led advertising vehicles in the driving process, we must listen to the chassis lights and other parts have some abnormal ringing, or there is a case of oil leakage, when the need to replace the oil should be replaced in a timely manner. The oil used must be of good quality and top-level replacement, and the best is to shorten the oil mileage. 6. Check if the circuit in the engine compartment of the led advertising vehicle has any damage and aging. The parts in each part have no deformation or looseness. If these problems occur, they should be promptly processed and maintained. (Text / Sun Ni)
We make use of alkali-solution and acid-isolation extraction process to separate fiber and protein from low-temperature soybean flakes. Then, separated protein solids go through high pressure homogenization, high temperature sterilization and spray drying to produce protein isolates. The main sections included in this process are: Alkali Dissolution , Acid Precipitation , Spi Decanter Centrifuge, Spi Spray Drying , flashing drying.
Applications:
We also provide Oils And Fats Project , Low Temperature and Edible Soybean Meal Project, Cottonseed Protein Project, full fat soybean powder project, ASME Pressure Vessel , Horizontal Type Dryer , etc.
Soy Protein Isolated Project,Spi Project,Acid Precipitation,Spi Spray Drying,Alkali Dissolution,Spi Decanter Centrifuge Shandong ChemSta Machinery Manufacturing Co.,Ltd. , https://www.oil-proteinmachine.com
1. Severing as a kind of food additive, soybean protein isolate is able to efficiently improve the protein content of the food, thus improving food functional performance.
2. SPI is also suitable for production of health care products.
3. It can be used for production of environment friendly binding agents as well.
