KCB gear pump is based on the work of the pump cylinder and the meshing gear between the volume change and movement to transfer liquid or pressurized liquid rotary pump. Two gears, the pump body and the front and the back cover form two enclosed spaces. When the gear rotates, the volume of the space on the side where the gear is disengaged increases from small to large to form a vacuum to suck the liquid in. The volume of the space on the meshing side of the gear changes from large to small , While squeezing the liquid into the pipe. The suction chamber and the discharge chamber are separated by the meshing line of two gears. The pressure at the outlet of the gear pump depends entirely on the resistance of the pump. This pump has a good self-absorption, each without pumping liquid before filling the pump, the structure is simple and compact, easy to use and maintain. The pump by conveying the liquid automatic lubrication daily work, without additional lubrication oil and elastic coupling transmission power to compensate for the installation caused by the small deviation in the hydraulic shock play a good buffer role. KCB gear pump is a pump body, pump cover, gear, bearing sleeve and shaft seal and other components. Gear pump gear, the shaft is nitriding, high hardness and wear resistance, gear and shaft installed in the sleeve together. All moving parts in the gear pump pump are lubricated with the medium they supply. The pump four bearings installed in the pump body, with the work of pressure automatically adjust the size of the gap between the end, so the pressure pump stability, the output flow pulsation, high volume ratio. Aqua Water Shoes,Aqua Shoes Brand,Aqua Shoes Adults,Clear Aqua Shoes Huaian Boshi Sports Products Co.,Ltd , https://www.bsdivingboots.com
KCB gear pump common type for conveying non-particulate fibers, non-corrosive, the maximum temperature does not exceed 200 ℃; KCB high temperature gear pump, pump technology through transformation, supporting high temperature sealing, the use of temperature can reach 300 ℃. Delivery viscosity is generally not more than 2000cst, such as heavy oil, diesel, mechanical oil, and other properties of similar liquids. Can be used as transmission, pressurization, fuel injection, hydraulic and lubrication pumps. Gear pump conveying viscosity over 2000cst should be supporting deceleration devices. Stainless steel gear pump suitable for conveying non-corrosive medium. Transport flammable, explosive medium gear pump gear should be replaced by a copper gear and mechanical seal, supporting explosion-proof motor at the same time. Special conditions to be customized conditions.