Kama country five small pull-arm garbage truck \KMC5030 sanitation with hook-arm garbage truck, Kemah five small pull-arm garbage truck national five emissions, new models, new energy, market growth, large quantities, complete vehicles Model KMC5030ZXXL27D5, chassis model: KMC1030L27D5, wheelbase: 2700mm, Kama micro-card new cab, authentic country Wu Wuling 61 horsepower LJ465Q-2AE Engine, 5-speed gearbox, 2 tons rear axle, 175R14LT tires, independent suspension beam. Exemption and environmental protection have been issued. The Kama Country Five Small Arm-type Garbage Truck is also an environmentally-friendly environmental sanitation vehicle. It has an exemption notice and can be purchased without a surcharge. Kama's five small pull-arm garbage trucks are mainly used for collecting and carrying various garbage in various places such as municipal sanitation, property management, large factories, industrial and mining. The hook-arm garbage truck adopts a full hydraulic control operating system, and the garbage compartment and the chassis can be completely separated, and has the advantages of reasonable structure, simple operation, stability, high use efficiency, good sealing performance, convenient dumping, etc., and can realize one vehicle and multiple garbage. The joint operation of the car, cycle transportation, fully improve the transportation capacity of the vehicle. On the blue card, the C1 driver's license can be opened. The working principle and structural composition of the Kama Country Five Small Arm-type Garbage Truck: Kama's five small pull-arm garbage trucks are equipped with a frame on the chassis, a garbage bin on the attached frame, and a lifting device. The main hydraulic cylinder of the pull arm is the main transmission device for lifting and unloading garbage. The telescopic control can complete the working process of lifting the garbage bin, unloading garbage and removing the empty garbage bin. One end of the main hydraulic cylinder of the pull arm is connected at the end of the attached frame. It is connected to one end of the cab and the other end is connected to the pull arm. Multi-way reversing valve: ensures the hydraulic components put into operation, reliable commutation, and ensures that the working cylinder stays at any position. Kemao five small pull-arm garbage truck special features: The collection and transportation method of Kema's five small-sized pull-arm garbage trucks is the garbage collection and transportation method widely used in the world. It can realize multiple vehicles per car, greatly reducing the use cost and improving work efficiency. Kama's five small pull-arm garbage trucks have both cargo self-unloading and automatic loading and unloading functions, and these two functions are completed by a pull-arm truck, which is highly efficient. Both functions are operated and converted by a hydraulic system. Kama State five small pull-arm garbage truck garbage bin pull-up operation method: 1. Push the locking hook operating handle to the retracted position, and the locking cylinder is retracted, so that the locking frame is retracted and the flip frame and the attached frame are locked and fixed; 2. Pull the lever operation handle to the extended position, the pull arm cylinder extends, the movable pull arm rotates around the front hinge shaft of the flip flip frame, the pull arm is at the hook box position, and the height of the pull hook hook is appropriately adjusted and bent with the box body Hook alignment 3. When the pull arm hooks to the box hook, continue to push down the arm operation handle to the drop position, so that the garbage box continues to get on the train; 4. When the garbage truck box is placed on the attached frame, release the handle of the pull arm to return it to the neutral position, then pull the locking hook operation handle to the locked position, and the locking cylinder extends. The locking frame is turned up and the flip frame is locked and fixed to the garbage box body, and the handle is released to return it to the middle position; the loading work of the garbage truck body is completed, the power take-off device is released, and the whole vehicle can be transported. Kama's five small pull-arm garbage truck garbage bins are put down; 1. After starting the vehicle, hang the power take-off device, push the locking hook operating handle down to the retracted position, the locking cylinder is retracted, and the locking frame is turned down. The flip frame and the garbage box are disengaged and fixed and attached. The frame is locked and fixed, and the handle is released to return it to the neutral position; 3. After the arm-type garbage truck is placed, adjust the position of the movable arm hook and the box hook to decouple it, push the arm operation handle down to the falling position, pull the arm cylinder to retract, and move the arm around the flip frame. The front hinge shaft rotates, the movable pull arm is returned to the attached frame, the release of the power take-off bin is completed, and the whole vehicle can be transported. Need more small garbage trucks, hook-arm garbage trucks, compressed garbage trucks, hanging bucket garbage trucks... Welcome to call, come to the factory to consult and order! (This article comes from Xiagong Chusheng) Matched Implements For Power Tiller
The small power can be matched with ditches, plows, planters, reapers and other small agricultural machinery, used for farmland management, plowing and ridge formation, multi-purpose, high economic efficiency.
Mini Tiller Price,Best Power Tiller,Power Tiller Tractor,Power Tiller Cultivator Henan Qianli Machinery Co.,Ltd. , https://www.chalionagri.com
2. Pull the lever operating handle to the extended position, the arm cylinder extends, and the movable arm rotates around the front hinge shaft of the flipping frame, and the garbage box body is flipped and tilted together with the movable arm; when the garbage box is placed It is strictly forbidden to stand at the rear of the carriage. 
