Nox Sensor 12V For FUSO Car,FUSO automobile sensor 12V Nox sensor is suitable for FUSO tail gas treatment.
Nox sensor is one of the key components of SCR post-treatment system. It is used to measure the concentration of nitrogen and oxygen in engine exhaust to meet the needs of closed-loop control of engine aftertreatment system and on-board OBD diagnostic system. It can be applied to gas engine or diesel engine. Its structure includes ceramic probe, cable and processing chip controller, which is connected with ECU through can communication.
The effects of Nox sensor damage are as follows:
1. If the Nox sensor is damaged, the diesel control system is in an open-loop state, that is, the emission data cannot be accurately fed back, and the engine control unit cannot accurately adjust the emission. At this time, the vehicle's emission must exceed the standard. If it always exceeds the standard, the service life of tail gas emission treatment equipment will be shortened.
2. Because it is a key component for measuring the excessive exhaust of diesel vehicles. If it is damaged or works poorly, it will directly cause multiple fault lights of the engine to turn on. At the same time, there will be relevant fault storage records in the control unit.
3. The damage of Nox sensor will lead to the disorder of diesel combustion control, resulting in weak acceleration, idle jitter, unable to start and so on.
Once a problem occurs, the Nox sensor needs to be replaced in time. It is usually installed at the rear end of the catalyst in the exhaust pipe.
Nox Sensor 12V For FUSO Car, Fuso Auto Parts 12V Nox sensor,Fuso Automobile Sensor 12V Nox sensor,Mitsubishi Fuso Parts 12V Nox sensor Ruian OKOOO Electronic Technology Co., LTD , https://www.okoosensor.com
Production Details Â
tractor parts:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
1) Molding process:
Resin sand/Green Sand/Investment Casting
2) Material:
EN-GJS-400-15/ EN-GJS-450-10/EN-GJS-500-7/EN-GJS-600-3.
GGG40, GGG50, GGG60.
3) Molding:
Hand molding/Molding machine/Molding line.
4) Possible Heat Treatment:
Annealing.
5) Industry involved:
Municipal industry/Construction industry/ Fluid industry/Automotive industry
6) Part unit weight range:
2kg-3000kgs
7) Max/Min wall thickness requirements:
5mm-250mm
8) Manufacturer Certification:
ISO9001(2000)/ TS16949
Why Choose Us
1) Experience in casting for over 15 years and served customers all around the world.
2) Standard material according to technical drawing
3)Stable quality
4) On-time delivery
5) Competitive price and good service
6) Positive customer feedback from domestic and international market
7) International advanced-level equipment such as CNC, numerical lathes, furnance, welding Â
  equipment, CMM and detect &testing equipment we used to ensure our product's quality.
8) OEM service, your demand is our pursued.
9) ISO9001:2008 and TS16949 quality control
10)Â Standard:Â ASTMÂ BSÂ DINÂ etc
FAQ
1. What are the main materials of your products?
We are focused on casting and processing of grey iron and ductile iron products.
2. What is your MOQ?
We will arrange production based on your drawings and deliver your products as per your requirements. We will do our best to meet your demands.
3. What is your main equipment?
Our casting equipment is brought from Japan. They mainly include: FBO auto molding lines, sand lines, cleaning lines, vertical and horizontal machining centers and CNC machining center.
4. Do you make the molds by yourself?
We are facilitated with advanced mold making equipment and CNC processing machining center. Therefore, we can make molds independently.
5. What are your advantages?
1) Professional staff
2) 24 years of casting experience
3) Rigorous quality control system
4) On-time delivery rate is over 98%
Â
