December 23, 2024

High Efficiency Round Downspout Rain Water Pipe Roll Forming Machine

Posted on

Model NO.: SH-DS
Drive System: Chain Drive
Power Supply: 380V, 50Hz, 3phase
Main Motor Power(W): 7.5 Kw
Trademark: Suhang
Transport Package: Standard Package with Film, Plastic and Steel Wire
Specification: 3500*1600*1500mm
Origin: Wuxi, Jiangsu, China
HS Code: 8455229090
                                            Downspout pipe roll forming machine
 
 1.  Technical Parameter
 


Item NO.
 
Description
 
Offered Specification

1.0
 Roll forming machine
 

1.1
Rolling speed
10-15m/min(not include cutting time)

1.2
Rolling thickness
0.3-0.6mm 

1.3
Raw material
Galvanized cold steel sheet

1.4
Dimension
3500*1600*1500 mm

1.5
Effective width
60mm

1.6
Roller stations
20 stations One stage for embossing

1.7
Roller material
45#forge steel, coated with chrome

1.8
Shaft diameter
Φ70mm ,material is 45# forge steel

1.9
Transmission
By chain

1.10
Material of chain
45# forged steel with frequency quenching, 12A

1.11
Material of cutting
Cr12Mov with quench HRC58-62°

1.12
Tolerance of cutting
6m+-0.5mm

1.13
Frame
H type steel



 2.  Main Components
 

Serial No.
Commodity & Description
Quantity

1
3T manual uncoiler
1 set

2
Infeed guiding 
1 set

3
Main roll forming machine
1 set

4
straighten device
1 set

5
Hydraulic cutting equipment
1 set

6
Output table
1 set

7
Main drive
1 set

8
Hydraulic system
1 set

9
Controlling system (including cabinet)
1 set

10
Downpipe elbow forming machine
1 set

11
seaming machine
1 set

 

3.  Working Flow of Roll Forming Machine

De-coiler-→Level device -→Main roll forming machine-→Hydraulic cutting-→ Run out table

A. Passive Decoiler..........................................................To load and uncoiling material
(We also have Electric Decoiler and Hydraulic Decoiler to hold the heavy material.)

B. Servo Feeding Applicator............................................To feed the material accurately

C. Hydraulic/Press Punching...........................................To punch as requirements

D. Roll Forming Unit.........................................................To roll form as requirement

E. Hydraulic Cutting.........................................................To cut sheets as desired length
(We also have non-stop hydraulic cutting system.)

F. Output Table................................................................Support the finished products

 
 
 
4.  Advantage for  Roll Forming Machine

1). Reasonable Price
2). High Quality
3). 12 Months Warranty
4). More Than 10 Years Experience
5). Durable
6). Reliable

   During the warranty period, maintain and change the spare parts for the customers for free (except for the instrument damage caused by human factors or natural disasters. ) And provide technical support for life-long.
   We can design and manufacture the machine according to clients' request! Our machines have passed CE, Guaranteed quality. Please send us the enquiry with Profile Drawing.




5.  Downspout application 

      A downspout  is a pipe for carrying rainwater from a rain gutter.Downspouts are usually vertical and usually extend down to ground level. The water is directed away from the building's foundation, to protect the foundations from water damage. The water is usually piped to a sewer, or let into the ground through seepage.The first ever downspout to be installed was in 1240 on the Tower of London, as it was whitewashed and the newly painted walls had to be protected from the rain. Decorative heads are sometimes added, these being low-height gargoyles.



6.   After-sale Serive

   - The seller take responsibility to installation and commissioning of the equipment and free training. After machine arrive the destination, by the request of the buyer , the seller will provide 1 technical engineer to guide installation and training , and the buyer should give the technical person with full cooperated.
   - Installation period: about 5 days after the complete preparation by the buyer such as the foundation and all necessary accessories.
   - Training time: 5 days.
   - Before departure of the engineers from seller, the buyer should pay for installation and commissioning fee 100$/day to the point account of the seller. The two-way ticket,visa, food, hotel , the translator and insurance are all should provide by buyer with full responsibility.
   -The seller supply technical data (including forming mould drawing, electrical elements drawing and equipment drawing etc.)



7.  Company Profile

     Wuxi Suhang Machinery manufacturing Co., Ltd. is specialized in building materials of light steel structure. Since the factory founded 10 years before, it always designs and produces various type profile
of roll forming machine.
     The main products of factory is Roller shutter door, PU sandwish panel line, pre-painted steel forming machine, Racking roll forming machine, the cable tray roll forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down
Pipe forming machine, the whole carriage plate for car beam unit, Steel storage unit, etc. The products
are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas and other
construction projects,  Our factory can meet the construction enterprises, automobile industry, Iron and
steel production enterprises' growing demands.
    Suhang machinery is located in Wuxi city, Jiangsu province which is close to Shanghai,  It's about half an hour's journey. We enojoy the convenient transportation and advantageous location which supply good business opportunities for the buyers home and abroad.



8.  FAQ
 
1). Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
Besides, the width is adjustable.
 
2). Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world. We need your machines running in order to keep your business running.
 
3). How to visit your company?
Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Wuxi Station (30 minutes), then we can pick up you.
 
4). What can you do if the machine broken?
Our machines' warranty period is 12 months, if the broken parts can't repair, we will send the new parts replace the broken parts for free, but you need pay the express cost  If after warranty period, we can through negotiation to solve the problems, and we supply the technical support for the whole life of the machine.
 
5). Can you be responsible for transport?
Yes, please tell me the destination port or address. we have rich experience in transportation.
 
6). You are trade company or factory?
We are factories.
 
7). Why your price is higher than others?
As we persist on that factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than 20 years without any problem. 
 
8). How long the machine could be made?
Normally speaking, deck floor roll forming machine could be made about 60 working days. If you need machines in a hurry, we can try it short time.

Silica Insulations

Silica Insulations,Aerogel Silica,Silica Insulation,Silica Fiber Insulation

Henan Minmetals East New Materials CO. LTD. , https://www.east-silicones.com