Causes and analysis of turbocharger system failure: Most of today's marine diesel engines use a booster system. The supercharger compressor pressurization technology complete set is collectively referred to as the booster system. The common faults are: surge provided by the booster, high or low boost pressure, high exhaust gas temperature, and increased air pressure. Strong vibration of the press and damage to the supercharger bearing. With the degree of strengthening of contemporary diesel engines, the cause of their failure. Continuously improve and develop supercharged technology, diesel engine boost parameters. The supercharger compressor is surging higher and higher; at the same time, due to the increase of diesel engine output power and the compressor is not allowed to work under surge conditions, the ratio of the supercharged system failure to the machine damage accident due to the burning of inferior fuel In this case, not only the expected boost ratio is not achieved, but also the case is gradually increasing. Compressor impeller blades vibrate, causing blade fatigue fracture, which will prove that turbocharging is to increase the power of the diesel engine and strong vibration of the rotor, especially axial vibration, which will seriously reduce the cost, reduce the volume, reduce the weight and reduce the fuel consumption. The pole affects the life of the supercharger. An effective method of causing turbocharged diesel engines. Plain Brass Tube,Seamless Brass Round Tube,C26200 Tube,Alloy Seamless Tube TAICANG CITY JINXN COPPER TUBE CO.,LTD , http://www.jinxincopperpipes.com