Explosion-proof distribution box manufacturers / explosion-proof distribution box manufacturers (hereinafter referred to as distribution box), applicable to the Class I or Class B, T1-T4 group below the level, group of explosive gas environment hazardous areas in Area 1, Zone 2, for AC 50Hz, rated voltage 220 or 380V line, used to control the start and stop of three-phase asynchronous motor, can also be used to remotely control the motor, with overload, short circuit protection.
Order process
1. The user contacts our company sales personnel, and through the telephone communication, mail sending or QQ WeChat and other methods, the product parameters need to be clearly explained.
2. Our company will receive a reply within 1 hour from your company's inquiry information, and will send a written quotation to the user within 2 hours. The non-standard customized product can be communicated with the user by our technical staff and issue relevant plans. The written price quoted by the sales person after the accounting price is sent to the user after the sales manager reviews the stamp.
3. If the two parties have no doubt about the price, we will send the sales staff to arrange the contract and send it to the user. After the user returns the contract and delivers the advance payment, we will start production.
4. Our company will make related products according to the specified time. After the user delivers the final payment, our logistics department will arrange delivery.
Explosion-proof mark: ExdeIIBT6Gb/DIPA21TA, T6
Rated voltage: 220V/380V
Branch circuit rated current: 1A, 2A, 4A, 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A
Protection class: IP65
Corrosion protection level: WF1xWF2
Total Switch Configuration: Miniature Circuit Breaker or Molded Case Circuit Breaker
Branch switch configuration: 1P or 2P series switches and various leakage protection functions, normally configured as 1P
Import port configuration: The inlet device specification is G1/2~G3 and can be tailored to the requirements
Inlet and outlet direction: down in and out or down in and out
Installation method: hanging or vertical
Dust workshop explosion-proof distribution box features:
1, cast aluminum alloy shell, surface spray, corrosion resistance.
2. The built-in components are C45N (C45AD), NC100H or DZ20 circuit breakers imported from domestic famous brands.
3, can increase points, combined light
4, with overload, short circuit protection
5, can increase undervoltage, loss of pressure, leakage protection
6, C45N is especially suitable for lighting distribution system, C45AD is especially suitable for power distribution system.
7. The inlet cavity, component cavity and outlet cavity are independent.
8, steel pipe wiring or cable wiring must be equipped with cable clamps sealed joints.
9, this product meets the national CB3836.1.2 - 2000 standard design requirements.
The explosion-proof power distribution box of the dust workshop is used indoors and outdoors.
Explosion-proof distribution box product features
1 The shell of this product adopts aluminum alloy die-casting molding, and the surface is electrostatically sprayed after high-speed shot blasting. The appearance is beautiful;
2 This product is a compound type explosion-proof structure. The switch box adopts a flameproof structure. The bus box and the connection box adopt an increased safety structure.
3 Modular design, various circuits can be freely combined;
4 Built-in high-breakage small leakage circuit breakers or molded case leakage circuit breakers, which are realized by operating the explosion-proof external body handle;
5 This product fully introduces a new type of optimized design scheme and operating mechanism, which is compact and reasonable in structure, versatile, flexible and convenient to use, and has a good feel.
6 has overload, short circuit, phase loss, leakage protection;
7 All fasteners are made of 304 stainless steel with strong corrosion resistance;
8 wiring, steel or cable, explosion-proof hose can be;
9 can be customized according to user requirements;
Third, explosion-proof distribution box technical parameters
1. Explosion-proof mark: ExdeIIBT4/T5/T6, ExdeIICT4/T5/T6, DIP A20 TA, T4/T5/T6;
2. Rated voltage: AC220/380V, non-standard voltage: 12V/24V/36V/127V/660V;
3. The total switch current: 10A800A; sub-switching current: 1A630A;
4. Protection level: IP54/IP55/IP65;
5. Thread size: DN15-DN100/G1/2-G4 inch
6. The introduction of line specifications: diameter 6mm-80mm; lead wire specifications: diameter 6mm-80mm;
7.Introduction of leading direction: upward, upward, downward and downward (according to customer's requirements without restrictions
Shielding Window
EMI products are widely used in military chassis, shelters, shielding rooms, micr-darkrooms, low radiation communication equipment, medical and testing equipment. While solving the contradiction between ventilation, heat dissipation, and EMI of the equipment, the product is designed to be waterproof, rainproof, and dustproof.
Ventilation openings are one of the main leakage areas of electromagnetic waves. EMI wave-guide window use the principle of cutoff waveguides to solve the contradiction between ventilation and shielding. The characteristics of this series of ventilation waveguides are excellent ventilation performance and extremely high shielding performance.