A 3-Axis CNC Machining Center/Mill is used for creating various industrial parts. This is achieved by using a wide-range of tooling and cutters depending on the type of material being cut and the end product being manufactured. Vertical Machining Center,Vertical Cnc Machine,Cnc Vertical Machining Center,Vertical Turning Center Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hostoncncs.com
A. Product introduction
Bag filter is a specialized liquid filtration apparatus which can effectively remove contaminants in the liquid, drastically improve the quality of the liquid. When using a bag filter machine, liquid enter from the right side of the entrance into the body, and then flow into the filter bag from the top. Due to the impact of the liquid and the uniform pressure, the filter bag expands and attaches to the stainless steel mesh net wall. The liquid flows downstream through the bag, while the outflow through the filter screen to complete the filtering process. Pollutants are blocked down by filter bag, then left in the bag inside, which can be removed during cleaning and replacement bag.
Our company manufacture this bag filter with single or more bags in different specifications and stainless steel (material SUS304). The cylinder head and barrel are connected with quick-fitting flange. Cylinder wall thickness is 2mm on-wards, and can be manufactured according to customer requirements. Bags are fixed with band spring or pressure lever. Filter materials can be nylon, polypropylene, polyester, nom ex, polit-ef, etc. The bag filter applies in water treatment, food and beverage, chemicals, acrylic device, made of flowers, coatings and paints, fine chemicals, petrochemicals, electronics, air-oil ash, binders, various oils, compressor refrigerant, a variety of plating solution and so on.
B. Main features:
1, Cover uses union nut rings structure, convenient to replace filter bag, put pressure on the average. It has a good seal effect.
2, The bag has a variety of materials, specifications, precision for choose to meet the requirements of different flow filtration.
3, Configure with supportive net tube, which can effectively prevent the deformation of bag to ensure the effectiveness and prolong life.
4, A variety of takeover mode (flange, inner wire, fast access), a variety of import and export patterns (side into the bottom or the side into the side), to meet different customer site installation requirements.
5, The bag with spring pressure to impact tightly, can effectively prevent leakage of unfiltered liquid.
6, Filter housing, supportive net tube are made of the material of 304 or 316 stainless steel, which are corrosion resistance, good pressure resistance, surface mirror polished and beautiful appearance.
C. The filter bag
1 The bag has large surface area and volume. At the same filtering criteria, capacity of a piece of 2 # filtering bag is the same as 12-18 pieces of typical 10PP filtering cartridge does. It is the best choice to reduce costs and improve efficiency.
2, Specifications: 1 # bag diameter 7 inches (178mm), length 17 inches (432mm);
2 # bag diameter 7 inches (178mm), Length 32 inches (813mm).
3, Material: PE (polyester), PP (polypropylene).
4, PP bag technical parameters:
Early bag drop: 0.14Bar
Ideal to withstand the pressure drop: 1.4Bar
Limit to withstand the pressure drop: 2.4Bar
5, Recommended operating temperature: 71 ° C or less.
Â
Model
Flow rate
 (T/h)
Inlet & outlet dia.
(mm)Dimension
Bag qty.
Bag specification
Filtration area
()
YL-1-219
20
DN50
219*410
1# single
180*410
0.23
YL-2-219
40
DN65
219*810
2# single
180*810
0.46
YL-2-400
50-80
DN80
400*810
2#Â two
180*810
0.92
YL-2-500
120
DN100
500*810
2#Â three
180*810
1.38
YL-2-550
140
DN100
550*810
2#Â four
180*810
1.8
YL-2-650
160
DN125
650*810
2#Â five
180*810
1.84
YL-2-750
200
DN150
750*810
2#Â six
180*810
2.3
YL-2-800
220
DN150
800*810
2#Â eight
180*810
2.5
YL-2-850
240
DN200
850*810
2#Â nine
180*810
2.76
Package:
 Our services:We provide 24 hours online customer service.
Any inquiry about water treatment system, please feel free to contact me for further details!
Contact information:
Mobile phone: +86 13585066069
 Â
Alibaba website: http://yldwater.en.made-in-china.com
Official website: www.zgyld.com
Guarantee period:1 year
After-sale service:800-827-87-226
A 3-axis CNC Mill works on three separate axes:
X-Axis: Moving longitudinally or [left-to-right"
Y-Axis: Moving laterally or [front-to-back"
Z-Axis: Moving Vertically or [up-and-down"
CNC Vertical Machining Centers can include an additional axis to do specific cutting applications.
Rotary Tables are common as a 4th Axis on mills. They can vary in size and weight capacities and can have a horizontal or vertical configuration. They are generally an add-on to a standard 3-axis mill. The mill will have to have a proper 4th axis interface (generally a 4th axis card, drive and CNC Control) to accept a 4th axis rotary table.
Trunnion Tables can also be an add-on to a vertical CNC Mill. A Trunnion table adds a 4th and 5th axis to a standard mill by incorporating an A-Axis (which rotates around the X-Axis) as well as a C-Axis (which rotates around the Z Axis).
A true 5-axis machine can allow for continuous 5-axis machining simultaneously. This increases both speed and accuracy when machining the part.
CNC Vertical Mills generally have a single spindle, automatic tool changer, work table and CNC Control.
The spindle on a CNC Machining Center can have a wide range of speeds depending on what material is being cut and the depth of cut that is required. Typical spindle speed ranges from 0 to 10,000 RPM. Higher speeds are used for lighter materials including graphite and aluminum among others. Higher speeds can reach 12,000 RPM up to 50,000 RPM and higher.
The Spindle is loaded with tool holders and cutters to achieve the proper material removal. There are many different styles of tool holders including BT and CAT – which have a conical shape as well as HSK, which uses flanges instead of a taper to lock the holder in place. BT and CAT Holders can come in various sizes including 30, 40 and 50 taper depending on the size of tool the cutter requires. HSK (Hollow taper ShanK) comes in a variety of types – A through F – and sizes from HSK-32 up to HSK-160. HSK is considered a better tool holder for high speed machining as there is more surface contact between the spindle and the holder, reducing vibration and keeping the tool from pulling back into the receiver when cutting at high speeds.
A CNC Vertical Machining Center offers different styles of automatic tool changers as well. The most common style is the umbrella-style. This is where the tool holders are loaded into the carousel vertically. The other style is a drum or side-mount style. The tools are loaded in horizontally in this type. This allows for greater part height in the work area and can help accommodate a rotary table, fixture or any additional work holding devices mounted to the table.
Duplex Bag Filter with Stainless Steel Filter Housing
Duplex Bag Filter with Stainless Steel Filter Housing