Calcium Base Grease,Copper Bearing Grease,Calcium Sulfonate Grease,Complex Calcium Base Grease PUYANG XINYE SPECIAL LUBRICATING OIL AND GREASE CO.,LTD , https://www.xinyelubricant.com
Basketball gym sports wood floor use value influencing factors
The surface performance of sports flooring in a basketball stadium refers to the level of satisfaction of the technical and safety requirements in different competitive competitions, training, fitness and teaching processes in the surface of the floor surface of the basketball floor of the basketball gymnasium. Reflected surface friction characteristics and surface film roughness characteristics. The large or small sliding friction coefficient of the sports floor surface of the basketball gymnasium is easy for athletes to fall due to loss of center during exercise.
The surface of the sports floor of the basketball gym has its own special features. First, it is the surface that directly contacts the athlete. When the athlete makes a running, jumping, or emergency stop, the sports function should be guaranteed to the maximum extent without affecting the technical movement. And safety performance, namely basketball gym sports floor three basic functions. The professional basketball gym sports floor is different from the home improvement floor with the beautiful appearance and the comfortable feeling of the foot. It must have good surface sliding friction and the surface roughness of the paint film that meets the special requirements. The sliding friction coefficient is 0.4-0.6. In between, too slippery or too astringent is not appropriate.
There are usually two kinds of wood flooring for basketball gyms used in gymnasiums. One is a simple single-layer basketball gym with sports flooring, and the other is a single-layer keel basketball gym with sports flooring. Simple single-layer basketball gym sports flooring refers to sports wood floors that are directly bonded to cement floors or hard floors that have been leveled. Sports flooring made using this method is relatively inexpensive, and its performance indicators are not In order to meet the requirements of the sports floor of the basketball hall for the competition, the use of such sports wood flooring in the gymnasium has been deprecated.
With the development of sports and the demand of sports people for high-performance sports point hardware, the maintenance and maintenance of sports flooring in basketball stadiums has become the most concerned and urgent problem to be solved by sports stadium managers in China. The correct maintenance and protection methods for sports floor of basketball gymnasium can not only ensure the neatness and appearance of the floor, but also ensure the optimal performance of the floor and effectively prolong the service life of the sports floor of the basketball hall.
1, the stadium humidity guarantee between 35% - 50%.
Good external conditions are the basis for the maintenance of wooden floors in basketball gyms, and maintaining the same humidity throughout the four seasons is the basis for the longevity of basketball flooring. In the winter heating season, due to the influence of the northern monsoon, the outside air is dry, which is much lower than the air humidity in the hall. At the same time, due to the use of a heater, the humidity in the hall is reduced. Therefore, the stadium must be closed to reduce air ventilation. At the same time, certain flower plants can be placed in the stadium. It is best to configure an air humidifier. At the same time daily (2-3 times) wipe the floor surface with a non-drip mop to ensure that the indoor humidity is appropriate. In the summer and autumn, in the high-temperature season, due to the increase of air humidity, the air circulation in the hall should be strengthened, and the air exchange should be performed once a day for at least 2 hours each time. When the weather permits, the doors and windows will be naturally ventilated every day.
2, regular inspection of the floor expansion and contraction.
During the use of sports flooring in basketball stadiums, a certain amount of deformation and expansion will occur due to humidity, long-term high loads on the floor, etc. In general, we will leave 2 in the position of the wall when we install the sports floor in the basketball gym. - 4 cm expansion joints, to leave some room for the safety of the floor, regular inspection of the gap width expansion joints can effectively prevent the use of sports flooring in basketball stadium some of the problems that arise.
3. Before moving, lay a protective layer on the ground.
Due to the different operation system of the stadium, the interior facilities of the stadium need to be constantly moved. The surface of the sports floor of the basketball gym has a layer of protective film. When the heavy objects move on the top, the rigid pulley of the trolley wears the paint film on the floor surface before moving. Laying a protective layer on the floor surface can effectively reduce the wear of the paint film.
4. Regularly clean the stains on the stands of the event stands.
The event stands inside the stadium need to be stretched and folded. During the movement of the event stands, if the stains on the roller skating on the movable stands are not regularly cleaned, then the dirt particles on the pulleys will be directly pressed under the pressure. Into the paint film, long-term will cause the ground roller pulley over the black, more serious will directly damage the internal layer of the floor structure.
5. Lay a dust pad at the door.
The interior floor sports wood floor paint film directly affects the use value of the sports floor in the basketball hall. Visitors must wear sports shoes when entering the stadium. When the foreigners enter the venue, the sand and other particles carried on the soles of the feet will seriously rub the paint on the floor surface and put it in the entrance of the stadium. The dust pad can better prevent the paint inside the stadium from wearing.