Excavator Cylinder Piston Seals
Precautions for the installation of hydraulic cylinder piston seals in excavators
Hydraulic cylinder piston seals, hydraulic cylinder seal, boom seal Safe Seal Technology Co., Ltd. , http://www.aprseal.com
Â
Benefit and FeaturesÂ
1. Material: The main body is made of aluminum alloy, it is more light and sturdy.
2. Interfaces to the anode hardening treatment, greatly improving the corrosion resistance
3. Export adopts flat structure, loading and unloading oil, separated from the joint, ensures no leakage, reduce environmental pollution
4. Hydrodynamic Body: Design and high lift poppet minimizes pressure drop to give maximum flow rate.
5. On the valve body is equipped with endoscopic mouth, when loading and unloading of the observable oil flows.
Â
Structure and and working principle
The API adaptor valve diameter is φ 100mm(4").
The API adaptor valve made of valve body, valve clack and operating shaft etc, it is manual open.
The Maximum filling rate of up to 2300 L/Min.
Â
Maintenance
Â
1. Clean-keeping: Maintain the cleanness of parts exports, in a timely manner to eliminate the above dust or oil dirties, when not in use should be equipped with dust cap.
2. Maintain:When the API adaptor opening or closing, should'nt be too pull to avoid damage the  internal structure.
Â
Packaging & Delivery
Â
1. Packaging Details: 4PCS/CTN.
2. Delivery Detail: The product should be stored and dry inside storeroom without corrosive gas, transportation and loading and unloading to should take put down gently.
Â
1. The sealing of the oil cylinder piston should use products of reliable quality to ensure good sealing performance.
2.Before installing the oil cylinder piston seal, the seal and sealing groove should be cleaned to ensure that the sealing surface is free of impurities.
3. When installing the seal, the correct installation sequence and direction should be carried out according to the drawing requirements to ensure the correct installation of the seal.
4.When installing the seal, special tools should be used to avoid using sharp tools and hard objects to damage the seal.
5. When installing the seal, attention should be paid to whether the seal groove is damaged or worn. If so, it should be replaced or repaired in a timely manner.
6. When installing the seal, an appropriate amount of lubricating oil should be applied to avoid friction damage to the seal during installation.
7.When installing the seal, it should be ensured that the compression of the sealing ring meets the requirements to avoid excessive or insufficient compression leading to seal failure.
8.After installing the seal, a sealing test should be conducted to ensure that the sealing performance meets the requirements.
API Adaptor Valve with Sight Glass
Model NO.: C806C-100
Origin: Zhejiang
API adaptor valve also named API dry fast joints. API adaptor valve installed in the tanker side of the bottom, using the quick connecting structure. Interface. Interface dimension conform to API RP1004 standards. This is an important component of the bottom of the filling oil. Can realize quick detachment without leakage, more safe and reliable loading and unloading of oil. Suitable for loading and unloading of water, diesel, gasoline and kerosene and other fuel oil, can be used in chemicals, corrosive acid or alkali medium, etc.