The second-hand car market develops hotly. In the process of transaction, the used car identification has a very important influence on the selling price of vehicles. We usually have professionals to identify and evaluate used cars. What are the main methods we use in the valuation process? Let's take a look at the specific introduction of professionals! First, appearance inspection. Attention should be paid to the inspection of the appearance of the vehicle: (1) Whether the colors of the vehicles are the same, whether the curvature of the vehicle is significantly debossed, and whether the vehicle has been repaired and the degree of repair; (2) The steel frame and the suspension of the vehicle are performed. Check to see if the shock absorber is intact and if there is any sign of damage to the bumper of the vehicle; (3) Check if the width of the door joint of the vehicle is too large, if the switch is firm, if the front and rear lights of the vehicle are normal, if there is a crack, etc. (4) ) Check the tires of the vehicle to see if it is consistent with the brand of the vehicle and whether there is serious wear. Check the connection of the hub and tire to see if there are serious collision marks. Second, the internal device checks. The internal inspection of the vehicle includes these aspects: (1) Whether the interior of the vehicle is clean and tidy, whether there is odor inside the vehicle, whether the seat is damaged, whether there is a place where the cigarette ends are burned, and whether the seat inside the vehicle is fully equipped, Such as whether there are pillows, etc.; (2) to see whether the other configuration of the car is original, such as speakers, accessories, glass, racks, etc.; (3) to check whether the other equipment inside the car is intact, such as the steering wheel, brake, clutch Whether the pedals are intact or if there is any visible damage or repairs in the car. Do not interfere with the outside world during inspections, and conduct detailed and thorough inspections. Third, test drive experience. It is crucial to test drive the used vehicle identification. Through the test drive, the overall performance of the vehicle can be felt. Especially, some performance related to safety is easier to experience through the test drive. For example, starting conditions, clutches, vehicle braking systems, etc. If there are problems in these areas have a great impact on driving safety, but also have a certain impact on the valuation of vehicles. Spare Parts For Loom,Film Fast Light,Film And Plastic,Plastic Heald Weaving Machine Transally weaving accessories Co., Ltd , https://www.transally-co.com