Plastic Testing Machine is mainly used to detect the parameters and properties of thermoplastic plastic, eg.: resistance to impact, HDT and VICAT softening point temperature, so as to get to know the product performance and control the production quality.
We specialized in the production of plastic physical performance testing instruments and plastics raw materials testing instruments:
HDT and VICAT softening point tester: to detect heating deformation temperature and VICAT softening point of plastic and polymer materials.
Melt flow rate meter: used to detect the flow performance of plastic material particles
Universal material Testing Machine: TY8000 electronic Tensile Testing Machine used to detect the physical properties of plastics. Utm is used to test tensile strength, bending strength, elastic modulus and elongation of plastic materials.
Pendulum impact testing machine: known as Charpy impact tester and Lzod impact tester. They are used to test the impact toughness of non-metallic materials, such as hard plastic plate, pipe material, special-shaped material, reinforced nylon, FRP, ceramic, cast stone, electric insulation material and so on.
Drop hammer impact test machine: It is suitable for impact test of plastic, glass, ceramics and other non-metallic materials samples or products. It is a test instrument for evaluating the shock resistance of materials
Low temperature brittleness testing machine: to test of the maximum temperature when sample broke under the specified conditions, namely the brittleness temperature
Friction coefficient instrument: applicable to measure the static and dynamic friction coefficient when material sliding.
Plastic Testing Equipment,Polymer Materials Testing,Plastic Testing Instrument,Plastic Material Testing,Plastic Test Machine Jiangsu Tianyuan Testing Equipment Co., LTD , http://www.tytesting.com
Reliable J&O® Brand ®
Over 10 years Exporting Experiences
ISO9001,3A, FDA Certification
Tube Fitting-Straight Male NPT Thread Connectors
Stainless Steel Connector
Stainless Steel Tube Fitting
Features:Â Â Â Â
Size:
1/16inch-11/2inch and 2 mm to 38 mm    Â
Material:
Stainless Steel/Alloy Steel /C-276/Titanium Materials etc. Â Â
Pressure Rating:
6000PSI(414bar)-/10000PSI(689bar)Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Suitable Media:
Water,Gas,Oil etc.  Â
End Connection:
Metric and Fractional Tube Fittings, NPT, ISO/BSP Threads,Weld EndsÂ
Main Products:
Compression Tube Fittings,Pipe Fittings, Needle Valves, Instrument Ball Valves, 2&3&5 Way Valve Manifolds, Check Vlaves, Gate Valves, Block&Bleed Valve, Sample Cylinders, Relief Valves,Syphons, Globe Valves, Plug Valves, Tube        Â
Stainless Steel:
From -325°F(-198°C) to 800°F(426°C)  Â
Brass:
From -325°F(-198°C) to 400°F(204°C)
Alloy 400/R-405:
From -325°F(-198°C) to 800°F(426°C)             Â
Related Product
We can supply:
J&O Valves including Sanitary Butterfly Valve, Sanitary Ball Valve, Mixing Proof Valve, Divert Valve, Check Valve and Diaphragm Valves, as well as Various Tank Accessories: Sampling Valve, Safety Valve, Relief Valve, Manhole Way, Sight Glass, Strainers/Filter, Cleaning Ball, And other Pipe Fittings, (Pipe Unions: SMS, DIN, IDF, RJT,3A; Fittings: Elbow, Tee, Reducer), each products are tested well by our strictly Quality Control System, and we also have excellent service to support you and promote your business.
Â
Lead Time:
For large quantity, as usual, it can be sent out within 20-40 days.
Small parcel will be dispatched by DHL, FEDEX, UPS OR TNT Courier.
Big cargo will be delivered by Air freight or By Sea.
Â
Our Service:
About payment:
Payment methods: L/C, T/ T, Western Union
About samples:
We can provide samples production and service. Usually 2 to 5 days, the sample can be sent to your hands. We will choose the shipping way as you required: by sea, by air or by express. Any question about samples, please contact us.
For OEM products:
We will finish the production within 20-40 days after payment has been confirmed.
About delivery and shipping:
We will choose the delivery way as you required: by sea, by air, by express ect. Save your cost is our mission.
Warranty:
Any question or problem will be respond within 24 hours.
Lifetime service:
Any problem happened to our product, we will do our best to help client to solve it, spare parts will be half price in lifetime.
Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you.
Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.
Integrity: All the warranty and guarantee from us will be put into come true
Â
J&O FLUID CONTROL CO., LIMITED
Reliable J&O® Brand ®
Over 10 years Exporting Experiences
ISO9001,3A, FDA Certification
Tube Fitting-Straight Male NPT Thread Connectors
Stainless Steel Connector
Stainless Steel Tube Fitting
Features:Â Â Â Â
Size:
1/16inch-11/2inch and 2 mm to 38 mm    Â
Material:
Stainless Steel/Alloy Steel /C-276/Titanium Materials etc. Â Â
Pressure Rating:
6000PSI(414bar)-/10000PSI(689bar)Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Suitable Media:
Water,Gas,Oil etc.  Â
End Connection:
Metric and Fractional Tube Fittings, NPT, ISO/BSP Threads,Weld EndsÂ
Main Products:
Compression Tube Fittings,Pipe Fittings, Needle Valves, Instrument Ball Valves, 2&3&5 Way Valve Manifolds, Check Vlaves, Gate Valves, Block&Bleed Valve, Sample Cylinders, Relief Valves,Syphons, Globe Valves, Plug Valves, Tube        Â
Stainless Steel:
From -325°F(-198°C) to 800°F(426°C)  Â
Brass:
From -325°F(-198°C) to 400°F(204°C)
Alloy 400/R-405:
From -325°F(-198°C) to 800°F(426°C)             Â
Related Product
We can supply:
J&O Valves including Sanitary Butterfly Valve, Sanitary Ball Valve, Mixing Proof Valve, Divert Valve, Check Valve and Diaphragm Valves, as well as Various Tank Accessories: Sampling Valve, Safety Valve, Relief Valve, Manhole Way, Sight Glass, Strainers/Filter, Cleaning Ball, And other Pipe Fittings, (Pipe Unions: SMS, DIN, IDF, RJT,3A; Fittings: Elbow, Tee, Reducer), each products are tested well by our strictly Quality Control System, and we also have excellent service to support you and promote your business.
Â
Lead Time:
For large quantity, as usual, it can be sent out within 20-40 days.
Small parcel will be dispatched by DHL, FEDEX, UPS OR TNT Courier.
Big cargo will be delivered by Air freight or By Sea.
Â
Our Service:
About payment:
Payment methods: L/C, T/ T, Western Union
About samples:
We can provide samples production and service. Usually 2 to 5 days, the sample can be sent to your hands. We will choose the shipping way as you required: by sea, by air or by express. Any question about samples, please contact us.
For OEM products:
We will finish the production within 20-40 days after payment has been confirmed.
About delivery and shipping:
We will choose the delivery way as you required: by sea, by air, by express ect. Save your cost is our mission.
Warranty:
Any question or problem will be respond within 24 hours.
Lifetime service:
Any problem happened to our product, we will do our best to help client to solve it, spare parts will be half price in lifetime.
Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you.
Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.
Integrity: All the warranty and guarantee from us will be put into come true
Â
Tube Fitting-Straight Stainless Steel NPT Thread Connectors Instrument Pipe Fitting
Trademark: J&O
Origin: China
HS Code: 730729000
Trademark: J&O
Origin: China
HS Code: 730729000
J&O FLUID CONTROL CO., LIMITED