The fuel rail sensor, commonly referred to as the Fuel Pressure sensor.
It is part of the vehicle's fuel system and is designed to monitor fuel pressure on fuel tracks. The Pressure Sensor sends this signal to the electronic control unit, which then adjusts the vehicle's fuel and time.
When the sensor has an issue it can cause problems with the performance of the vehicle. Pressure Sensor For Denso,Denso Fuel Pressure Sensor,Pressure Sensor,Common Rail Pressure Sensor RUIAN DELLFEI AUTO PARTS CO.,LTD. , https://www.dellfei.com
Description:
This radiator production line can be used in producing different specification radiators, with width among 535, 520, 480, 460, 320, 310 and center distance more than 500mm.
This machine has high automation degree, high forming quality, and high efficiency. The property of this machine has reached world-class quality.
The work flow of this line is as follows: Automatic decoiling-roll forming- hydraulic punching and cutting-spot welding-seam welding-panel head welding-head cutting-edge shearing-run-out.
The main components of the radiator production line are automatic decoiler, roll forming machine, leveler, oil press machine, press mould, series welding device, head cutter, edge shearer, product conveyer, pneumatic system, hydraulic system, and electric system, etc.
Properties:
Compared with similar lines, this radiator production line is fully automatic. Properties of its products have reached world-class quality.
This line has features of high production efficiency and low labor cost. This line can manufacture many different specification products. PLC controls all the welding procedures, and both welding quality and efficiency are very high.
Operation and Points That Need Attention:
The whole radiator production line is automatically controlled by PLC. Users can start the line to manufacture only by inputting product length.
Maintenance and Lubrication:
Users should regularly do lubrication for pneumatic device, and oil press machine, etc. Since there are many welding equipments in the line, users should often check working conditions of every equipment.
Packaging and Transportation:
This radiator production line adopts sea shipping by container and nude packaging.
Main Specification
Item
Data
Standard panel size
310mm, 320mm, 460mm, 480mm, 520mm, 535mm, etc
Panel length
500-4000mm
Length tolerance
±1.0mm
Panel bearing pressure
Positive pressure≥ 0.15Mpa, negative pressure ≥ 133Kpa, without deformation
Panel material
ST12, SPCC, DC01 cold rolled steel, 1.0-1.2mm
Total power
Approx 315KW
Total line dimension
46.5m X 3.5m
Oil fluits size
Steel thickness 1.0mm
≥ 11mm
Steel thickness 1.2mm
≥ 11.5mm
Number of oil fluits
Panel 310mm, 320mm
3
Panel 460mm, 480mm
5
Panel 520mm, 535mm
6
Input coil width
Panel 310mm
325mm
Panel 460mm
475mm
Panel 520mm
535mm
Machine photos
Â
Transformer Panel Radiator Production Line
Description:
This radiator production line can be used in producing different specification radiators, with width among 535, 520, 480, 460, 320, 310 and center distance more than 500mm.
This machine has high automation degree, high forming quality, and high efficiency. The property of this machine has reached world-class quality.
The work flow of this line is as follows: Automatic decoiling-roll forming- hydraulic punching and cutting-spot welding-seam welding-panel head welding-head cutting-edge shearing-run-out.
The main components of the radiator production line are automatic decoiler, roll forming machine, leveler, oil press machine, press mould, series welding device, head cutter, edge shearer, product conveyer, pneumatic system, hydraulic system, and electric system, etc.
Properties:
Compared with similar lines, this radiator production line is fully automatic. Properties of its products have reached world-class quality.
This line has features of high production efficiency and low labor cost. This line can manufacture many different specification products. PLC controls all the welding procedures, and both welding quality and efficiency are very high.
Operation and Points That Need Attention:
The whole radiator production line is automatically controlled by PLC. Users can start the line to manufacture only by inputting product length.
Maintenance and Lubrication:
Users should regularly do lubrication for pneumatic device, and oil press machine, etc. Since there are many welding equipments in the line, users should often check working conditions of every equipment.
Packaging and Transportation:
This radiator production line adopts sea shipping by container and nude packaging.
Main Specification
Item
Data
Standard panel size
310mm, 320mm, 460mm, 480mm, 520mm, 535mm, etc
Panel length
500-4000mm
Length tolerance
±1.0mm
Panel bearing pressure
Positive pressure≥ 0.15Mpa, negative pressure ≥ 133Kpa, without deformation
Panel material
ST12, SPCC, DC01 cold rolled steel, 1.0-1.2mm
Total power
Approx 315KW
Total line dimension
46.5m X 3.5m
Oil fluits size
Steel thickness 1.0mm
≥ 11mm
Steel thickness 1.2mm
≥ 11.5mm
Number of oil fluits
Panel 310mm, 320mm
3
Panel 460mm, 480mm
5
Panel 520mm, 535mm
6
Input coil width
Panel 310mm
325mm
Panel 460mm
475mm
Panel 520mm
535mm
Machine photos
Â
Transformer Radiator Production Line for Transformer
Model NO.: 310, 460, 520, etc
HS Code: 8455229090
Model NO.: 310, 460, 520, etc
HS Code: 8455229090
Transformer Panel Radiator Production Line