Abstract: Floss is made from lean meat and removes water. It is nutritious, easy to carry, and loved by consumers. This article is mainly from the perspective of monitoring the sealing performance of floss packaging, using the MFY-01 Sealing Tester independently developed by Jinan Languang Electromechanical Technology Co., Ltd. to test the sealing performance of floss packaging, and briefly described the testing principle and equipment parameters of MFY-01 . And the summary of the test process, effectively solve the problems caused by leakage, leakage, bagging, etc. caused by the sealing problem of the packaging, and improve the effect of the soft plastic packaging bag on the quality of the contents. Keywords: sealing performance, meat food, floss, finished product packaging, leakage, leak, leakage, sealer 1 , the meaning The sealing performance of a package is a key factor related to the quality of the contents of the package. This is because the tightness of the package determines the extent to which the finished product package is independent of the external environment. If the package is poorly sealed, the gas content or components inside the package are prone to occur. Changes, such as the leakage of gas from outside the package into the package or from the gas filled inside the package, can cause problems such as leakage if the package contains liquid components. This can cause product quality to deteriorate. The sealing problem of packaging is generally hidden and can not be identified with the naked eye, so it is difficult to find and deal with it in time before leaving the factory. It is often caused by the leakage and leakage of the contents during the long circulation and storage process after leaving the factory. Moldy, agglomeration, bagging and other quality problems, companies are therefore exposed to greater risks and economic losses. Therefore, the sealing problem of packaging has always been a major problem for enterprises. In this paper, take Floss Pine as an example to analyze the sealing problem of packaging bags. Meat floss is made from lean meat, chicken or fish in the pork and is made of water. It is delicious, nutritious, easy to carry, and can be eaten directly or used as an adjunct to other foods. Because the floss itself contains less water and has a high content of nutrients, the requirement for preservation conditions is relatively high. If the package has poor sealing, the floss is prone to agglomeration, mildew and other quality problems. Figure 1 Floss 2 , the standard situation At present, the testing standards for domestic package sealing are mainly GB/T 15171-1994 “Test methods for sealing performance of flexible packages â€. 3 , test sample The brand of plastic loose-leaf wrapped in plastic bags sold on the market. 4 , test equipment This article uses Labthink blue light MFY-01 seal tester to test. Figure 2 MFY-01 Seal Tester 4.1 Test principle By vacuuming the vacuum chamber of the equipment, the sample immersed in the vacuum chamber water generates a pressure difference between inside and outside, and checks whether the sample leaks, thereby determining the sealing performance of the sample; or through vacuuming the vacuum chamber, Make the sample produce internal and external pressure difference, and observe the sealing performance of the sample by observing the expansion of the sample and releasing the shape of the sample after releasing the vacuum. 4.2 Scope of application 4.3 Equipment Parameters 5 , the test process (1) Immerse the sample in the water in the vacuum chamber. (2) Seal the cover and set the required vacuum pressure parameters and holding time. (3) Turn on the vacuum pump and start vacuuming. Press the start button on the device to start the test. (4) Observe the presence of continuous bubbles on the surface of the package during vacuum pumping or during pressure holding. 6 , test results Floss sealing performance test results of the finished packaging bag 3 is: 2 in the finished packaging -90 KPa not leak, good sealing properties; an additional edge sealing the finished package KPa when the leak occurred at -35.4, seal Poor sex. 7. Conclusion Test of Labthink MFY-01 seal test device can be used floss finished package sealing performance, simple operation test, the short time-consuming, high efficiency, can be accurately reflected floss package sealing performance. Through the detection of the tightness of the 3 bags of dried meat floss finished packaging, it was found that not all packages can achieve good sealing performance, while the poor sealing performance packages are prone to agglomeration, odor, mildew and other quality problems, indicating that strengthening the finished product packaging factory The importance of front sealing performance testing. In addition, according to the characteristics of the floss, the need to focus on other properties of the oxygen barrier properties floss bags, water resistance, heat seal strength, etc., related testing equipment You can visit the website or blue light directly call us. The more you understand, the more trust! Labthink expects to enhance technology exchanges and cooperation with enterprises and institutions in the industry! Copyright Notice: Article Copyright Jinan Languang Electromechanical Technology Co., Ltd., without permission to prohibit reprint!
Stainless steel cabinets for storing samples, including laboratory sample cabinets, food sample cabinets, stainless steel sample cabinets, sample room sample cabinets, medical sample cabinets, drug sample cabinets, and drug sample cabinets
Jilin HaoChen cleaning Engineering Technology Co., Ltd. is a technological innovation enterprise focusing on the pharmaceutical purification engineering industry. The enterprise has a superb purification engineering technical team and excellent construction force. The company has always pursued the service tenet of "safety first, quality-oriented, customer first and technology first". Many representative air purification projects have been established in Jilin Province, Heilongjiang Province, Liaoning Province and Inner Mongolia Autonomous Region. With a registered capital of 5.8 million yuan, the company has grade II qualification for professional contracting of Building Decoration Engineering; Grade II qualification for professional contracting of building electromechanical installation engineering. Biological Safety Cabinet,Biosafety Cabinet,Bio Safety Cabinet,Biological Safety Cabinet Class 2 Jilin HaoChen cleaning Engineering Technology Co., Ltd , https://www.hccoalgas.com
Service Items:
Purification project of pharmaceutical clean workshop (pharmaceutical purification workshop, food purification workshop, electronic and chemical purification workshop, etc.)
Construction of purification operating room (hybrid integrated operating room, DSA operating room, laminar flow purification operating room, ordinary purification operating room, etc.)
Construction of ultra clean laboratory (Microbiology Laboratory, sterility laboratory, PCR laboratory, physical and chemical laboratory, P1, P2, P3 laboratory, etc.)
Construction of SPF animal feeding room purification project
Business items: medical purification color steel plate, supporting purification profile, air purification ventilation equipment, purification engineering supporting equipment, etc
At present, the company has 8 sets (pieces) of various large and medium-sized mechanical equipment, the original value of mechanical purification equipment is 4.6 million yuan, and the net value of mechanical purification equipment is 2.3 million yuan. The total annual construction output value is about 10 million yuan. Our company has 24 registered employees. Among them, there are 15 personnel with professional titles, 7 engineering technicians, 3 senior engineers, 5 engineers and 7 assistant engineers; 2 persons with economic management titles.
Morality first, customers first, safety first and economy first!
We look forward to working with you.