Camp Out Tent Mat,Waterproof Mat Outdoor,Outdoor Camping Mat,Foam Sleeping Pad Ningbo Jiuxin International Trade Co., Ltd. , https://www.cnnbjiuxin.com
The reaction force of a floating pneumatic fender does not increase sharply even under excess load. Therefore, these fenders perform extremely well under such condation and as a result, protect ships and mooring facilities.
2). No deterration or variation in performance
Because pneumatic fenders utilise the compressive elasticity of air, performance deteriation due to fatigue is completely absent. The performance of these fenders remain unchanged at extremely low temperatures, even below - 50'C.
3). Safety realiability
Xincheng pneumatic rubber fender are constructed using several layers of strong tyre cord are therefore extremely resistant to pressure and cutting, and are therefore extremely resistant to pressure and cutting. The larger size ( 2.5m dia upward ) are fitted with safety valve to prevent accident in the event of over copressiom.
4). Construction
The fender body is constructed of an inner rubber layer, reinforcing cord layers and an outer rubber layer. All three layers are bonded together by a combination of heat and pressure over a period of time in a vulcanising oven. Once completed, the fenders are pressure tested before relase.
To provide maximum strength and safety, the out skin of submarine fender is thicker than a normal surface fender.
The outer skin rubber compound is desinged and manufactured to be able to withstand both strenuous use and adverse weather. Condations whilst protecting the cord layers and inner rubber the cord layers are corranged at optimum angles designed to be completely airtight.
5). Simple and low cost installation
The weight of the fenders is supported by the water on which it floats, therefore, the fender can be morred simply by means of a guy rope or chain at minimal cost it can be removed easily to another quay or jetty when not use or transfeered to alternative mooring points as required
6). Chain and tyre net
Almost floating fenders are protected by a chain and tyre net. The purpose of the chain and tyre net is to protec the fender body from damage by sharp objets or protrusions such as rough faced quay walls, to distribute sheer forces along the length of the chain net and to prevent the fender body from having to absorb them.
Marine depend on the ball safe for excess load boat fender using ship to ship working press 0.05Mpa - 0.08 Mpa.
This marine fender catalog
Â
 Initial pressure(Po) is 0.05Mpa
Initial pressure(Po) is 0.08Mpa
weight(kg)
R(KN)
GEA(KJ)
weight(kg)
R(KN)
GEA(KJ)
0.5*1.0
25
64
6
25
83
8
0.6*1.0
32
74
8
32
96
11
0.7*1.5
50
137
17
50
178
24
1.0*1.5
80
182
32
80
235
44
1.0*2.0
100
257
45
125
335
63
1.2*2.0
120
297
63
165
386
86
1.35*2.5
165
427
102
226
554
140
1.5*3.0
315
597
153
370
751
211
1.7*3.0
405
639
191
436
860
263
2.0*3.5
590
875
308
632
1138
424
2.5*4.0
1050
1381
663
1110
1815
925
2.5*5.5
1333
2019
943
1410
2653
1317
3.0*5.0
1880
2104
1210
2155
2709
1571
3.0*6.0
2160
2583
1485
2470
3292
1888
3.3*4.5
2020
1884
1175
2300
2476
1640
3.3*6.0
2300
2783
1675
2600
3652
2338
3.3*6.5
2700
3015
1814
3080
3961
2532
Note: The weight of the ball by ball weight (without jacket), the weight of error of ± 10%; reaction force error of ± 10%
Ship or Boat Protection Yokohama Pneumatic Fender
Model NO.: XC20140616002
Quality: World Class
Type: Military Vessels
Marine Parts: Fender, bumper
Engine: 4 Stroke
Engine Type: Outboard
Usage: Bearthing, Protection, Drifting, Ship Docking
Trademark: XINCHENG
Specification: CCC CCS ISO9001: 2008
Origin: Qingdao
HS Code: 401694
1). Safe for excess load marine depend on the ball