The most affected nature of high-altitude trucks on bumpy road conditions is the chassis of the aerial work platform. If there is a clear scraping of the chassis, high-altitude operations owners need special attention. Sometimes, some minor scratches can also cause oil. Slight leakage of the bottom shell. If a high-altitude vehicle runs on slippery muddy roads, it will inevitably cause the mud to splash on the chassis. If accumulated dirt is not cleaned in time, the chassis and suspension system of the aerial vehicle will be seriously corroded. Therefore, if it is to some road conditions, Too good place to drive, need to do a special chassis cleaning and anti-rust maintenance. If there has been abnormal chassis, steering wheel jitter and other phenomena, that the suspension system has been damaged. Every time long-distance trucks run long distances, long-term high-load operation is a test for high-altitude vehicle engines. Therefore, engine oil and water tank replacement frequency will be higher. In some halfway stations, there will be supply of oil. In the case of poor product quality, if the high-altitude trucks add such inferior oils, if they do not pay attention to them, the engine will generate knocking noise and noise, and on the other hand, the three-way catalytic converter will become ineffective. Some will also block the exhaust pipe, which in turn will cause the engine to perform weakly and increase fuel consumption. Severe damage to the internal parts of the engine will occur. Therefore, after the long-distance return, clean and maintain the engine of the aerial work vehicle. For high-altitude vehicles that run a long distance, check the frequency of braking should be higher than other uses of the vehicle. The first is to observe whether it is liquid-deficient, and check whether it needs to be replaced. Nowadays, highways between cities provide great convenience for high-altitude vehicles. However, the chance of damage to the window glass has also increased. If the glass is damaged, the owners need to increase the polishing and repair of the glass. budget
This line includes elevator for fresh tomatoes--tomatoes washing machine--tomatoes sorting machine--preheating machine--tomato pulping machine--vacuum concentration machine- paste sterilization machine--Filling Machine.
We have the automatic production line, and the small semi-automatic processing machines. We can also customize it based on your demands.
1. Preheating Machine: This machine purpose:Increase the temperature of the steam heating the slurry to achieve the purpose of preheating;
2. Pulping Machine: This machine can make juice or paste without peeling the skin of fruits. It can press many kinds of dry fruit such as pineapple, lemon, orange, apple etc. It can remove the residues automatically.
3. Vacuum Concentration Machine: Using the principle of lowering the boiling point under vacuum, the raw materials are subjected to boiling water evaporation treatment to achieve the purpose of extracting high-purity substances.
4. Mixing Tank: Purpose: for fruit pulp ingredients,add sugar and other accessories.
5. Tubular Sterilization: This machine is with PID control system; it is easy to operate.
Tomato Paste Production Line,Tomato Paste Line,Tomato Paste Processing Line,Tomato Sauce Machines Henan Gems Machinery Co.,Ltd , https://www.gemsmachines.com
Long-distance traveling lift maintenance contents and procedures
Whether it is over the mountains or across the intercity speeds of Mercedes-Benz, the high-altitude vehicles operating on mountain roads or on long-distance journeys over a long period of time will exceed the normal operating standards and will make the chassis, tires and shock absorbers of air lift trucks, and air filters. Cleaner, air conditioning filter and other aspects of the maintenance cycle in advance.