Slewing mechanism : It is composed of hydraulic motor, gear reducer, slewing ring and so on. Its working principle is: the hydraulic motor drives the reducer, and the pinion gear on the output shaft of the reducer rotates to push the slewing bearing to make it rotate. Hydraulic system : It is supplied by a fixed pump, the working pressure of the system is 16Mpa, and the flow rate is 25L/min. The working pressure is set by the overflow valve (factory adjusted by the company). When the power take-off gear is engaged, the master is driven. The oil pump runs and the oil in the tank is output by the oil pump and reaches the outrigger operating valve. After the operation of the leg is completed, the dispensing handle is dialed to the upper car. At this time, the hydraulic oil is switched from the leg oil circuit to the upper car, and the upper car section can be operated. Operating system : The conversion of functions can be achieved through this system. By manipulating the handle of the multi-way valve, the telescopic legs and the working arm can be rotated up and down. (When operating the multi-way valve, a power take-off should be hung to drive the pump to work) Advantages of the product : The main arm of the JAC aerial vehicle is equipped with a lifting structure (limited to one ton), and the upper arm, lower arm, slewing and lifting hydraulic systems are all unique stepless speed control systems, which are energy-saving and flexible, stable, safe and reliable. specialty. The legs can be divided and adjusted to achieve leveling of the entire vehicle on a flat road. The hydraulic and electrical control systems of JAC's folding height lift trucks are equipped with various limit devices and emergency engine flameout devices, which will automatically cut off the power supply or stop the engine when a failure occurs, ensuring safety. The electric operating system adopts a waterproof switch to avoid water ingress and corrosion of the switch. Leakage problem. Scope of work : JAC folding aerial lift trucks are widely used in electrical line maintenance, street lamp maintenance, aerial cleaning, landscaping, electricity, communications, street lamps, traffic police, highways, cable television, shipbuilding, construction, gardens, advertising, photography King, large companies and other industries. A working aerial vehicle is a type of vehicle that can operate with multiple hydraulic cylinders that are operated by a hydraulic or electric system and can lift up to 3 meters. Its main features are: in the operation bucket and rotary seat are equipped with operating devices, remote control of the engine start / stop, high speed / low speed, the use of electro-hydraulic proportional valve control arm movement, good stability, the working arm can be left , Right 360 ° continuous rotation, automatically maintain the working tank level by the linkage mechanism, the main pump failure can be used to control the emergency pump down operation slot, with night lighting, lifting heavy objects. JAC aerial vehicles are widely used in high-altitude operations such as power, street lamps, municipalities, gardens, communications, airports, construction (repair) ships, transportation, advertising, and photography. According to the types are mainly divided into: Vertical lift type (also known as scissor type) aerial vehicles, folding arm lift type aerial platforms, self-propelled aerial platforms, telescopic boom type aerial platforms. Among them, the vertical lifting work load is significant, but the operation height is limited, and the mobility is not good and it is inflexible. At present, the domestic boom-lifting type aerial work vehicle is widely used in China. According to the operating height is mainly divided into: 6 meters, 8 meters, 10 meters, 12 meters, 14 meters, 16 meters, 18 meters, 20 meters, 22 meters, 24 meters, 30 meters, 32 meters, 40 meters, 50 meters and other heights. Types of aerial vehicles: Conventional high-vehicle products include: Dongfeng XBMW aerial vehicles, Dongfeng XBN scissor-type aerial platform trucks, Dongfeng Dolika high-altitude vehicles, Dongfeng 145 aerial vehicles, Dongfeng Tianjin aerial vehicles, Dongfeng 153 aerial vehicles Jiangling double-row high-altitude vehicles, Qingling Isuzu aerial vehicles, JAC aerial vehicles, Futian Omega canopies. The color of aerial vehicles: The color of JAC's aerial vehicles is mainly based on the color of engineering yellow, and it can also be designed as white according to the needs of users. Fine Mist Sprayer,Fine Mist Spray Bottle,Ultra Fine Mist Spray Bottle,Ultra Fine Mist Sprayer Jiangyin First Beauty Packing Industry Co, ltd , https://www.jycosmeticpacking.com Jianghuai aerial working vehicle technical parameters Vehicle model HFC JAC Aerial Vehicle Overall size (mm) 8230×2320×3380 Total mass (Kg) 7450 Carriage size (mm) × × Rated load quality (Kg) Approach/Departure angle 24/12 Service quality (Kg) 7060 Front suspension/rear suspension (mm) 1085/2420 The maximum speed (km/h) 95 Vehicle identification code LJ11PEBC×××××××××× Chassis model HFC1071KRLT engine model Engine manufacturer Displacement power YC4F115-30 Guangxi Yuchai Machinery Co., Ltd. 2660 85 Fuel type Diesel Emission Standards GB17691-2005 State III, GB3847-2005 Number of axes 2 Number of tires 6 Wheelbase 3815 Tire specifications 7.50-16 Axle load 2460/4990 Front track 1665 Number of leaf springs 9/12 Rear track 1600 other Stretch 790mm, extend 120mm. Dedicated part parameters Optional working height: 16-18 meters Maximum operating range: 8 meters Work bucket rated load: 200kg Rotation angle: 360 degree rotation Swing speed: 0~2r/min Rated weight: 1000kg Operation method Up and down operations Working arm: Tri-fold arm Cab Double row Cab color Engineering yellow, white
Jianghuai Aerial Vehicle HFC Jianghuai 18 meters folding high altitude lift truck
Jianghuai Aerial Vehicle 16-18m Product Type:HFC1071KRLT Product Specifications:16-18m Chassis: JAC Emission Standard: State III Engine: Yuchai 115hp JAC Aerial Work Platforms are manufactured using JAC Euro III standard double row chassis, hydraulic Three-section folding arm, the maximum working height of 16-18 meters, the operating range of 7.1--8 meters, the operating height can be designed according to demand 10 meters, 12 meters, 14 meters, 16 meters, etc., using domestic and imported valve and hydraulic Cylinders, commutation balance, flexible and convenient operation, the legs and the working arm interlocked, the legs and the working arm interlocked to prevent misoperation. JAC folding height lift truck is equipped with four hydraulic legs to ensure the stability and safety of the entire vehicle. JAC folding high-altitude lift trucks can be equipped with hooks. Hangers can hoist 1-1.5 tons. The JAC high-altitude operation vehicle can be operated up and down, rotate 360 ​​degrees, and install hand throttle. JAC's high-altitude trucks are manufactured using JAC Euro three-standard double-row seat chassis. The hydraulic three-section folding arm has a maximum working height of 16-18 meters and a working range of 7.1--8 meters. The working height can be designed as 10 meters and 12 meters as required. , 14 meters, 16 meters, etc., using domestic, imported valve and hydraulic cylinder, commutation balance, flexible and convenient operation, the leg and the working arm interlocked, the leg and the working arm interlocked to prevent misoperation. JAC folding height lift truck is equipped with four hydraulic legs to ensure the stability and safety of the entire vehicle. JAC folding high-altitude lift trucks can be equipped with hooks. Hangers can hoist 1-1.5 tons. The JAC high-altitude operation vehicle can be operated up and down, rotate 360 ​​degrees, and install hand throttle. Force device: It is composed of oil pump, power take-off device, electric control switch and pneumatic solenoid valve. It is through the power switch clutch on and off of the power take-off device installed in the driver's cab of the vehicle, so that the power take-off gear and the output of the car gearbox can be taken out. The teeth engage or disengage, allowing the oil pump to work or stop. (Note: When the car is moving, the power-taking tooth in the power take-off should be disengaged and the oil pump is not working)