Professional Plastic Tubing Extruder manufacturer is located in China, including Plastic Pipe Extruder,Twin Screw Pipe Extruder,, etc.
Adding high proportion of calcium carbonate and recycled materials greatly reduces production costs, labor costs and production site area, and has a very high cost performance ratio. Plastic Tubing Extruder,Plastic Pipe Extruder,Twin Screw Pipe Extruder Zhoushan Tongfa Machinery Co.,Ltd. , https://www.tongfa-machinery.com
Technical Parameters:
Model typeXG-200B
Input power
200Kw
Input voltage
380V±10% 50HZ/60HZ
Max input current
Three phases  300A
Oscillating frequency
20-100KHZ
Inverted power
≤200kw
Water pressure
0.15MPA≤water pressure≤0.3MPA
Kechuang High frequency  induction welding machine  Features:
(1) Fast heating, uniform, which can effectively prevent zigzag caused by local overheating embrittlement and fracture, but also can prevent lack of penetration cause off tooth and other bad phenomenon;
(2) Suitable for welding high performance, high hardness serrated saw blade.
(3) Provide welding arts, installation simple and useful convenience.
(4) Compared to thyristor medium frequency furnace, save energy 10-30%.
(5)Can complete minimum and maximum head welding, all kinds of power, frequency for your selection.
Kechuang high frequency  induction welding machine  transformer:
1.Technical parameters:
1.1. Capacity range: 300KVA--3000KVA
1.2. Frequency range: 0.1KHz--500KHz
2.Features:
General Transformer----convenient operation, single turn ratio, need to adjust the induction coil to match the machine.
Multi-ratio Transformer----suitable for all kinds of induction coils, used for all kinds of occasion, just need to adjust the turn ratio is ok.
Coaxial Transformer---energy concentration, small volume, but the turn ratio is single, better suitable for fixed load.
High Frequency induction induction welding machine  Coil:
1.Technical parameters:
  made by the customers' detailed technical requirement.
2.Features:
Ø Magnetic field distribution and design are precise, high efficient and energy-saving.
Ø Use with the magnetizer, easy to adjust the magnetic field intensity.
Ø Easy disassembly, exchangeability.
Ø Fastness and durability.
Â
3.Induction coil applications:
  Crankshaft induction coil, end-face induction coil, hub bearing induction coil, caterpillar track section hardening induction coil, inner hold induction coil, gear induction coil, shaft neck hardening induction coil, 3m inner hold hardening induction coil, crankshaft with fillet induction coil.
Â
4.Induction coil pictures:
Cooling water device:
1.Technique data
Input voltage;three phase 380V±10%
Rated voltage: three phase 380VÂ 50Hz
Cooling capacity:31100Kcal/h-1806000Kcal/h
2. Feature:
Cooling water tower movement all adopt in thermal efficiency high copper tube, let the working fluid (water or other liquid) in its line through, through the fan and air for natural heat exchange, one-time finish. It is not only energy conservation and environmental protection,but also tube is clean and unobstructed, reduce the failure rate, prolong the useful life of the equipment. Closed circulating cooling reduce pipe corrosion and scaling, do not need to pool, covers an area of small, convenient to move, energy saving, simple operation.
Customer service:
Call or e-mail us any time. Before you place your order, we will be happy to discuss your detailed requirements with you and help you find a selection of machine that is just right for your market.
Â
 Quick Delivery:
With your wide requested of faucets with even less than our MOQ, we are able to fulfill most requests within short days of your order.
Â
 Promise :
Customers Satisfaction, provide good quality and reasonable price and constant after sale service to be engaged in 100% of us .Our Warranty period is one year.
Â
 High Frequency  induction welding machine Selection :
You can just let us know the type, power, frequency, quenching ways, quenching hardness ,depth and materials, choosing proper frequency according to production efficiency. According to specific workpiece shape, material, welding material and so on to decide. choosing according to smelter furnace and production efficiency, choosing according to product speed, materials, temperatures and so on. If is the axial, please tell us the diameter of the axial? If you have drawings please send us. please contact us more specification.
  Â
IGBT High Frequency Tool Welding Machine with Industrial ChillerÂ
Technical Parameters:
Model typeXG-200B
Input power
200Kw
Input voltage
380V±10% 50HZ/60HZ
Max input current
Three phases  300A
Oscillating frequency
20-100KHZ
Inverted power
≤200kw
Water pressure
0.15MPA≤water pressure≤0.3MPA
Kechuang High frequency  induction welding machine  Features:
(1) Fast heating, uniform, which can effectively prevent zigzag caused by local overheating embrittlement and fracture, but also can prevent lack of penetration cause off tooth and other bad phenomenon;
(2) Suitable for welding high performance, high hardness serrated saw blade.
(3) Provide welding arts, installation simple and useful convenience.
(4) Compared to thyristor medium frequency furnace, save energy 10-30%.
(5)Can complete minimum and maximum head welding, all kinds of power, frequency for your selection.
Kechuang high frequency  induction welding machine  transformer:
1.Technical parameters:
1.1. Capacity range: 300KVA--3000KVA
1.2. Frequency range: 0.1KHz--500KHz
2.Features:
General Transformer----convenient operation, single turn ratio, need to adjust the induction coil to match the machine.
Multi-ratio Transformer----suitable for all kinds of induction coils, used for all kinds of occasion, just need to adjust the turn ratio is ok.
Coaxial Transformer---energy concentration, small volume, but the turn ratio is single, better suitable for fixed load.
High Frequency induction induction welding machine  Coil:
1.Technical parameters:
  made by the customers' detailed technical requirement.
2.Features:
Ø Magnetic field distribution and design are precise, high efficient and energy-saving.
Ø Use with the magnetizer, easy to adjust the magnetic field intensity.
Ø Easy disassembly, exchangeability.
Ø Fastness and durability.
Â
3.Induction coil applications:
  Crankshaft induction coil, end-face induction coil, hub bearing induction coil, caterpillar track section hardening induction coil, inner hold induction coil, gear induction coil, shaft neck hardening induction coil, 3m inner hold hardening induction coil, crankshaft with fillet induction coil.
Â
4.Induction coil pictures:
Cooling water device:
1.Technique data
Input voltage;three phase 380V±10%
Rated voltage: three phase 380VÂ 50Hz
Cooling capacity:31100Kcal/h-1806000Kcal/h
2. Feature:
Cooling water tower movement all adopt in thermal efficiency high copper tube, let the working fluid (water or other liquid) in its line through, through the fan and air for natural heat exchange, one-time finish. It is not only energy conservation and environmental protection,but also tube is clean and unobstructed, reduce the failure rate, prolong the useful life of the equipment. Closed circulating cooling reduce pipe corrosion and scaling, do not need to pool, covers an area of small, convenient to move, energy saving, simple operation.
Customer service:
Call or e-mail us any time. Before you place your order, we will be happy to discuss your detailed requirements with you and help you find a selection of machine that is just right for your market.
Â
 Quick Delivery:
With your wide requested of faucets with even less than our MOQ, we are able to fulfill most requests within short days of your order.
Â
 Promise :
Customers Satisfaction, provide good quality and reasonable price and constant after sale service to be engaged in 100% of us .Our Warranty period is one year.
Â
 High Frequency  induction welding machine Selection :
You can just let us know the type, power, frequency, quenching ways, quenching hardness ,depth and materials, choosing proper frequency according to production efficiency. According to specific workpiece shape, material, welding material and so on to decide. choosing according to smelter furnace and production efficiency, choosing according to product speed, materials, temperatures and so on. If is the axial, please tell us the diameter of the axial? If you have drawings please send us. please contact us more specification.
  Â
[Conical co-rotating twin-screw Cable Material Granulator" has many superiorities ,such as owning high yield (10 to 20 tons/day),ultra-low power consumption (lowest electricity consumption:90kwh for 1 ton of finished product), good mixing and plasticization (high-pressure and plasticization),and can add high proportion of calcium carbonate to the materials (up to 400),and also can be reproduced for 100% reclaimed material with full exhaust and high pressure .It is the best choice for all kinds of cable material granulation, such as PVC,PE,LSNH,and cross-linking,etc.
IGBT High Frequency Tool Welding Machine with Industrial Chiller
Model NO.: XG-200
Condition: New
Input Voltage: 3*380V
Maximum Input Current: 300A
Rated Power: 200kw
Output Frequency: 20-100kHz
Duty Cycle: 100%
Precision: 0.1%
Cooling Method: Water Cooling
Trademark: Kechuang Electronic
Transport Package: Plywood Cases
Specification: XG-200
Origin: Zhengzhou, China
HS Code: 8514400090
Model NO.: XG-200
Condition: New
Input Voltage: 3*380V
Maximum Input Current: 300A
Rated Power: 200kw
Output Frequency: 20-100kHz
Duty Cycle: 100%
Precision: 0.1%
Cooling Method: Water Cooling
Trademark: Kechuang Electronic
Transport Package: Plywood Cases
Specification: XG-200
Origin: Zhengzhou, China
HS Code: 8514400090
IGBT High Frequency Tool Welding Machine with Industrial ChillerÂ