The principle: HHO engine carbon cleaning machine by electrolyzing water into hydrogen and oxygen gas, then suck the mixed gas into the engine by air intake. Due to the high temperature of HHO gas, through the burning of HHO gas mixed with fuel to clean the accumulated carbon deposition in the engine. Â Why should do carbon cleaning for car? What kind of car can use HHO engine carbon cleaning machine? What HHO engine carbon cleaning service can bring for customer? The principle: HHO engine carbon cleaning machine by electrolyzing water into hydrogen and oxygen gas, then suck the mixed gas into the engine by air intake. Due to the high temperature of HHO gas, through the burning of HHO gas mixed with fuel to clean the accumulated carbon deposition in the engine. Â Why should do carbon cleaning for car? What kind of car can use HHO engine carbon cleaning machine? What HHO engine carbon cleaning service can bring for customer?
5D Wheel Alignment With Tablet is stadard specification of 5D Wheel Alignment. This model is very simple. The user can operate the measurement and adjustment only with a tablet. The data transmit is by WiFi. So the mesurement results are very stable. With the development of technology, it is possible to control the whole process by the tablet with android system. Due to WIFI transmission, users can connect more devices with android system, for example cell phone with android system.
Advantages of Sucvary 5D Wheel Alignment:
1.Without limitation of space,5D wheel alignment can be used on all kinds of lifts.
2. With 5 cameras, the reference plane is car body, so 5D wheel alignment can measure almost all kinds of vehicles, even if the vehicle is lifted.
3. 5D wheel alignment supports varied operation platforms, point to point transmission by WiFi can shied interference.
4. 5D wheel alignment is supported by powerful cloud service; 5D wheel alignment can connect to IPAD, cell phone, computer and the Internet, supporting remote operation and data upgrade.
5. Four targets are crash resistant and can be exchanged. Fix wheel claws without taking apart wheel hub cover.
6. 5D wheel alignment measurement range is wide, and it can also test wheel deviation besides all traditional parameters.
7. The optional one point wheel clamps can be installed within four seconds.
5D Wheel Alignment With Tablet 5D Wheel Alignment With Tablet,5D Wheel Alignment Shenzhen Sucvary Tech Co., Ltd. , http://www.syalignment.comHHO Generator for Carbon Clean of engines
engine carbon cleaning machine
car care shop maintence service
carbon cleaning machine
Mode
GT-CCM-3.0E
GT-CCM-3.0T
GT-CCM-3.0W
Input Voltage
220/380V ±10%, 50/60Hz, three phase
Rated Capacity(KVA)
6
Rated Gas Production(L/h)
1500±10%
Water Consumption(L/h)
1.1
Engine size
1.0-7.0 Liters
Time Set
20-30 mins
Working Medium
Filtered water or deionized water or soft water
Working Method
Continuous
Outline Dimensions-L*W*H(mm)
900*550*850
965*620*1000
945*640*1110
Gross Weight(kg)
135
170
180
Ventilation Space Requirement(mm)
400 in each direction
Advantages
Specification:
1.Clean the carbon deposition in the engine
2.Improve the horsepower of car
3.Reduce emission
4.Saving time and cost
5.ISO9001, CE
There are many reasons for increased carbon deposition: incomplete combustion, poor quality fuel, bad driving habit, long time lower speed, poor air quality etc. With the increase of carbon deposition, will cause to difficult cold start, unstable idle speed, accelerating weakness, fuel consumption increased, excessive exhaust, engine knock etc.
Â
The model: motorcycle, car, bus, truck etc.
The brand: All brand of car, motorcycle, bus, truck. Such as BMW, BENZ, HYUNDAI, TOYOTA, HONDA etc.
Â
1. Maximize Fuel Efficiency
2. Save Energy and Oil, Eliminate Carbon Deposits, Enjoy Low-Carbon Life
3. Resume Horsepower and Torque
4.Extend Drivetrain Service Life
5.Reduce Harmful Emissions, Safety and environmental protection
6.Auto repair the oxygen sensor and ternary catalyst, prolong engine life .
7. Increase Governmental Test Passing Rate
8. Better for increasing satisfaction of customers.
9. Newest technologies, Quality Guarantee, Better Cleaning!
Work Flow
Our Services
Â
HHO Generator for Carbon Clean of engines
engine carbon cleaning machine
car care shop maintence service
carbon cleaning machine
Mode
GT-CCM-3.0E
GT-CCM-3.0T
GT-CCM-3.0W
Input Voltage
220/380V ±10%, 50/60Hz, three phase
Rated Capacity(KVA)
6
Rated Gas Production(L/h)
1500±10%
Water Consumption(L/h)
1.1
Engine size
1.0-7.0 Liters
Time Set
20-30 mins
Working Medium
Filtered water or deionized water or soft water
Working Method
Continuous
Outline Dimensions-L*W*H(mm)
900*550*850
965*620*1000
945*640*1110
Gross Weight(kg)
135
170
180
Ventilation Space Requirement(mm)
400 in each direction
Advantages
Specification:
1.Clean the carbon deposition in the engine
2.Improve the horsepower of car
3.Reduce emission
4.Saving time and cost
5.ISO9001, CE
There are many reasons for increased carbon deposition: incomplete combustion, poor quality fuel, bad driving habit, long time lower speed, poor air quality etc. With the increase of carbon deposition, will cause to difficult cold start, unstable idle speed, accelerating weakness, fuel consumption increased, excessive exhaust, engine knock etc.
Â
The model: motorcycle, car, bus, truck etc.
The brand: All brand of car, motorcycle, bus, truck. Such as BMW, BENZ, HYUNDAI, TOYOTA, HONDA etc.
Â
1. Maximize Fuel Efficiency
2. Save Energy and Oil, Eliminate Carbon Deposits, Enjoy Low-Carbon Life
3. Resume Horsepower and Torque
4.Extend Drivetrain Service Life
5.Reduce Harmful Emissions, Safety and environmental protection
6.Auto repair the oxygen sensor and ternary catalyst, prolong engine life .
7. Increase Governmental Test Passing Rate
8. Better for increasing satisfaction of customers.
9. Newest technologies, Quality Guarantee, Better Cleaning!
Work Flow
Our Services
Â
Hot Sale Gas on Road RC Car Carbon Clean Machine
Model NO.: GT-CCM-3.0E
Working Medium: Filtered Water or Deionized Water or Soft Water
Working Method: Contiuous
Outline Dimensions-L*W*H(mm): 900*550*850
Gross Weight: 136
Trademark: Hunan Gaintop
Transport Package: 1 Carton
Specification: GT-CCM-3.0 Engine carbon cleaner
Origin: Hunan, China
HS Code: 8405100000
Model NO.: GT-CCM-3.0E
Working Medium: Filtered Water or Deionized Water or Soft Water
Working Method: Contiuous
Outline Dimensions-L*W*H(mm): 900*550*850
Gross Weight: 136
Trademark: Hunan Gaintop
Transport Package: 1 Carton
Specification: GT-CCM-3.0 Engine carbon cleaner
Origin: Hunan, China
HS Code: 8405100000