Wire Rope Hoist,Electric Hoist,Electric Winch Manual Chain Hoist,Electric Chain Hoist Co., Ltd. , http://www.chropehoist.com
1.Machine List
Machine list
Â
Â
Â
Â
Â
5 ton hydraulic de-coiler (optional)
1 set
Main roll forming machine
1 set
PLC Control box
1 unit
Hydraulic station
1 unit
Servo following cutting
1 unit
Out table
2 units
1.Technical process
Uncoiling-Feeding with guide--Roll forming-Cutting-Products collecting
Â
1.Un-coiler: 5 ton hydraulic
2.De-coiling Holder: about 1500mm×1500mm×1700mm
3.Insider diameter of the un-coiler: 508-610mm
2)Roll forming machine:
1.Roll Forming Machine: RF-RP
2.Rolling Speed: 25-35m/min(cutting time is not include)
3.Steel sheet Thickness: 0.3-0.8mm color painted sheets, steel
4.Coil width 914mm
5.Control System: PLC Panasonic
6.Roller Stations: about 20 stations
7.Roller Material: 45# forge steel, coated with chrome
8.Shaft Material and DIA:¢75mm,material is 45# forge steel, Chrome with quenching
9.Maim Motor Power: 5.5kw Anhui wannan Brand
10.Hydraulic Pressure: 12Mpa
11.Material Of The Stations: Wall plate thickness 16mm
12.Tolerance: +1.5mm
13.Power supplier:220V, 60HZ,3 phase
14.Way Of Drive:1.2 inch single chain
15.Color Of The Machine :blue
16.The size of the forming machine:8000*1500*1000mm
17.Machine weight: about 6 tons
18.Angle accuracy: +-1degree
3)Cutting:
1.Cutting motion: Â Servo following cutting
2.Material of blade: CR12 with heat treatment
3.Length measuring: Automatically
4.The cutting thickness: 0.3- 0.8mm
5.Hydraulic Station Power: 4 KW
4.)Out table:
Size:4000*1350*1000mm
5)Control Box:
Electrical control system part, Yaswaka Japan Brand
1.Power supplier: 380 V, 50 Hz, 3Phase (adjusted with the requestment)
2.length & quantity measurement automatically;
3.length & quantity controlled by PLC,
4.Length inaccuracy can be amended easily.
5.Control panel: Button-type switch and touch screen
6.Unit of length: millimeter (switched on the control panel)
 FAQ
1)Q:Can you make machine according to my design?
  A:Yes, we have experienced technical team to work out the suitable design for you and confirm with you until you agree.
2) Q: Will you deliver the right goods as ordered? How can I trust you?
  A: Yes, we will. The core of our company culture is honesty and credit.
3)Q:What payment terms you accept?
  A:Commonly is TT, 30% deposit and 70% before shipment, and sometimes we can consider more for you as per your request.
4) Q:What is the warranty for our machine?
  A:We have one year guarantee, and provide whole life's technical support.
Â
Â
Roof Panel roll forming machine
1.Machine List
Machine list
Â
Â
Â
Â
Â
5 ton hydraulic de-coiler (optional)
1 set
Main roll forming machine
1 set
PLC Control box
1 unit
Hydraulic station
1 unit
Servo following cutting
1 unit
Out table
2 units
1.Technical process
Uncoiling-Feeding with guide--Roll forming-Cutting-Products collecting
Â
1.Un-coiler: 5 ton hydraulic
2.De-coiling Holder: about 1500mm×1500mm×1700mm
3.Insider diameter of the un-coiler: 508-610mm
2)Roll forming machine:
1.Roll Forming Machine: RF-RP
2.Rolling Speed: 25-35m/min(cutting time is not include)
3.Steel sheet Thickness: 0.3-0.8mm color painted sheets, steel
4.Coil width 914mm
5.Control System: PLC Panasonic
6.Roller Stations: about 20 stations
7.Roller Material: 45# forge steel, coated with chrome
8.Shaft Material and DIA:¢75mm,material is 45# forge steel, Chrome with quenching
9.Maim Motor Power: 5.5kw Anhui wannan Brand
10.Hydraulic Pressure: 12Mpa
11.Material Of The Stations: Wall plate thickness 16mm
12.Tolerance: +1.5mm
13.Power supplier:220V, 60HZ,3 phase
14.Way Of Drive:1.2 inch single chain
15.Color Of The Machine :blue
16.The size of the forming machine:8000*1500*1000mm
17.Machine weight: about 6 tons
18.Angle accuracy: +-1degree
3)Cutting:
1.Cutting motion: Â Servo following cutting
2.Material of blade: CR12 with heat treatment
3.Length measuring: Automatically
4.The cutting thickness: 0.3- 0.8mm
5.Hydraulic Station Power: 4 KW
4.)Out table:
Size:4000*1350*1000mm
5)Control Box:
Electrical control system part, Yaswaka Japan Brand
1.Power supplier: 380 V, 50 Hz, 3Phase (adjusted with the requestment)
2.length & quantity measurement automatically;
3.length & quantity controlled by PLC,
4.Length inaccuracy can be amended easily.
5.Control panel: Button-type switch and touch screen
6.Unit of length: millimeter (switched on the control panel)
 FAQ
1)Q:Can you make machine according to my design?
  A:Yes, we have experienced technical team to work out the suitable design for you and confirm with you until you agree.
2) Q: Will you deliver the right goods as ordered? How can I trust you?
  A: Yes, we will. The core of our company culture is honesty and credit.
3)Q:What payment terms you accept?
  A:Commonly is TT, 30% deposit and 70% before shipment, and sometimes we can consider more for you as per your request.
4) Q:What is the warranty for our machine?
  A:We have one year guarantee, and provide whole life's technical support.
Â
Â
High Speed Steel Tile Metal Roof Roll Forming Machine
Model NO.: EN-120WR
Machine Weight: About 6 Tons
Roller Material: 45# Forge Steel
Hydraulic Pressure: 12MPa
Tolerance: +1.5mm
Trademark: Ensource
Transport Package: Plastic Film, Container
Specification: EN-120WR
Origin: Zhejiang, China
HS Code: 8474801000
Model NO.: EN-120WR
Machine Weight: About 6 Tons
Roller Material: 45# Forge Steel
Hydraulic Pressure: 12MPa
Tolerance: +1.5mm
Trademark: Ensource
Transport Package: Plastic Film, Container
Specification: EN-120WR
Origin: Zhejiang, China
HS Code: 8474801000
Roof Panel roll forming machine2.Technical Data
1.)Un-coiler:2.Technical Data
1.)Un-coiler: