High Performance Custom Manufacture Rubber Gasket

Overview

Rubber gasket is a sealing device made in the form of a torus (round top view), with a square shaped cross-section (side view).

Other names for Rubber gasket would be Washer Rings, Lathe-Cut Rings, TetraSeal

The primary reason for using a Rubber gasket in a sealing application is that they perform the sealing function in a superior manner - and at a cost lower than any other comparable sealing device. For existing applications, there is no need to change the design or procedures. Square-rings fit in O-ring grooves and are interchangeable size for size.

Rubber gasket are available in a variety of rubber and plastic materials such as Buna, Viton, EPDM, Teflon, etc. In most static applications, a square ring will serve as a direct replacement for an O-ring and generally will perform a high pressure sealing function as well as or better than an O-ring.

Rubber gasket Sizes
We primarily stock American Standard (AS568) sizes of square rings in Nitrile and Viton. We can also supply square rings to metric dimensions.

Standard square rings have the same I.D. as the AS568 sizes. However, the Cross Section dimension is slightly smaller for square rings. The chart above shows the square ring cross sections for the American Standard series sizes.

Features of Rubber gasket:
Interchangeable with O-rings size for size (Standard AS568A sizes)
Uses same groove as O-ring
Can be used for radial seals
Material is homogenous, no joints, no laminations
Edges accurately formed
Extreme close tolerances held on cross-section, I.D. and O.D.
Controlled surface smoothness, hardness, elasticity, toxicity, texture
The modern, economical option for static applications
Available in many compounds



Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.

Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.

We have the highest quality and lowest costs in the industry delivered on time.

Overview

Rubber gasket is a sealing device made in the form of a torus (round top view), with a square shaped cross-section (side view).

Other names for Rubber gasket would be Washer Rings, Lathe-Cut Rings, TetraSeal

The primary reason for using a Rubber gasket in a sealing application is that they perform the sealing function in a superior manner - and at a cost lower than any other comparable sealing device. For existing applications, there is no need to change the design or procedures. Square-rings fit in O-ring grooves and are interchangeable size for size.

Rubber gasket are available in a variety of rubber and plastic materials such as Buna, Viton, EPDM, Teflon, etc. In most static applications, a square ring will serve as a direct replacement for an O-ring and generally will perform a high pressure sealing function as well as or better than an O-ring.

Rubber gasket Sizes
We primarily stock American Standard (AS568) sizes of square rings in Nitrile and Viton. We can also supply square rings to metric dimensions.

Standard square rings have the same I.D. as the AS568 sizes. However, the Cross Section dimension is slightly smaller for square rings. The chart above shows the square ring cross sections for the American Standard series sizes.

Features of Rubber gasket:
Interchangeable with O-rings size for size (Standard AS568A sizes)
Uses same groove as O-ring
Can be used for radial seals
Material is homogenous, no joints, no laminations
Edges accurately formed
Extreme close tolerances held on cross-section, I.D. and O.D.
Controlled surface smoothness, hardness, elasticity, toxicity, texture
The modern, economical option for static applications
Available in many compounds



Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.

Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.

We have the highest quality and lowest costs in the industry delivered on time.

Road Roler

This small Road Roller is mainly used for compacting various construction materials such as non-cohesive soil, stone, sandy soil, macadam aggregate mixtures.

This road roller is especially suitable for community road, asphalt road, village highway, underground garage, playground, concrete road, sports venue built, project building, and all kinds of groove earthwork backfill.

Our products are used in municipal, highway pavement maintenance operations,

also apply to groove, pipe trench backfill compaction in the construction engineering,

building construction and square homework, rolling lawns, etc.

1. With gasoline engine or famous diesel engine, superior performance, easy to start;
2. Operating radius is small
3. The transmission mechanism of the famous hydraulic drive system
4. Diesel power with electric startup
5. Double drum driving and vibration, ensure the compaction performance of the whole machine and gradability.

Road Roller, small road roller, mini road roller, road roller for sale

Gongyi Xiaoyi Jinwang Machinery Factory , https://www.jinwangmachines.com