Feeder working principle and performance The feeder is a feeder in the general sense, but because the names are different in different places, different names are produced, and the essence and function are basically the same. The vibrating feeder for mine is used to supply materials uniformly or quantitatively from the storage bin or other storage equipment to the receiving equipment. It is an essential equipment for the automation of the flow operation. It is divided into two types: open type and closed type. Electromagnetic vibrating feeders, feed hoppers and conveyors can be produced according to requirements. The vibrating feeder has a simple structure, convenient operation, no need for lubrication, low power consumption, and can uniformly adjust the amount of ore supplied; therefore, it has been widely used. Generally used for loose materials. According to the performance requirements of the equipment, the pressure of the material should be minimized during the configuration design. According to the requirements of the manufacturer, the effective discharge port of the warehouse material should not be greater than one quarter of the groove width, and the flow speed of the material is controlled at 6-18m/min. For materials with a large amount of feed, the barrage plate at the bottom of the silo should be set to a sufficient height; in order not to affect the performance of the feeder, the bar should not be fixed on the trough. In order to allow the silo to be discharged smoothly, the back wall inclination of the silo is preferably designed to be 55-65 degrees. The vibrating feeder can feed the block and granular materials uniformly and continuously from the silo to the receiving device. In the gravel production line, the crusher can be continuously and evenly fed to avoid clogging of the crusher receiving port. Feeder Uses: Widely used in industry, mining, gravel field, metallurgy, building materials, chemicals, mineral processing, coal mining and other crushing and screening line. Working principle of vibrating feeder: The machine uses the eccentric block in the vibrator to generate centrifugal force, so that the moving part of the sieve box, vibrator and the like can be forced to be continuous circular or nearly circular motion. The material is continuously thrown with the screen box on the inclined screen surface, and the material is continuously and uniformly sent to the receiving port. Vibration feeder performance characteristics: The machine is simple in structure, stable in vibration, uniform in feeding, good in continuous performance, adjustable in exciting force; easy to change and control flow at any time, easy to operate; eccentric block is excitation source, low noise, power consumption Less, good adjustment performance, no material phenomenon; if closed body can prevent dust pollution. Changzhou Jinxin ARTS & CRAFTS Co.,Ltd , https://www.jxpartyconfetti.com