December 22, 2024

Chinese Top Entry Trunnion Mounted Ball Valve Manufacturer

Posted on

Model NO.: SQ47
Type: Flexible Ball Valve
Function: Blow-Down Valve, Relief Valve, Atmospheric Valve, Bypass-Valve
Temperature: Normal Temperature
Application: Industrial Usage, Water Industrial Usage, Household Usage
Body: Split Body or Integral Body
Ball: Trunnion Mounted Ball, Double Block & Bleed
Stem: Blowout-Proof Stem
Seat: Single Piston Effect or Double Piston Effect Seat
O Ring: Aed O Ring
Fire Safe: External Leakage Prevention, Internal Leakage Prev
Ball Seat Alignment: Mechanical Stops Are Equipped on All Valves to Ens
Sealing: Double Block and Bleed
Cryogenic Services: Extended Bonnet for Cryogenic Services
Special: Nace Mr-0175
Trademark: O. E. M or AEA Brand
Transport Package: Plastic+Wooden Case
Specification: 1500*1500*2000mm
Origin: China
HS Code: 848180
AEA Top Entry Ball Valve requires two in-line isolation valves and a bleed valve, used to drain or vent trapped fluid between the two closure elements in order to safely isolate safely the downstream pipe. This feature can be achieved with one single valves c/w a bleed port between the obturator.

Chinese Top Entry Trunnion Mounted Ball Valve Manufacturer
 
Specification Details
Design Standard API 6D / ASME B16.34
Pressure/Temperature Chart ASME B16.34
Face to face Dimension API 6D / ASME B16.10
Testing Standard API 6D / ISO 5208
Flange Details ASME B16.5 up to 24″
ASME B16.47 26″ and Above
Size Range 2″ - 42″ (DN50 - DN1050)
ASME Class 150 - 2500
Bore Type Full Bore and Reduced Bore
Materials WCB / LCB / LCC / CF8M / CF8 / CF3M / 4A /
6A / Inconel
Trims F6a / F316 / F304 / F316L / F51 / F55 /
Inconel / 17-4 PH
Seats Soft / Metal
Ends Flange ends, Butt-weld End

Main Application
•Offshore oil & gas production
•Gas & oil terminals
•Chemical & Petrochemical
•Refining
•Fiscal Metering Skid Manufacturing
•LNG gas carrier
•Process/ Power industr y contractors

Advantage
•Space and weight saving
•Cost saving (product & installation)
•Minimized leak paths
•Increased line structural integrity
•ESDV+MOV or ESDV+XV configurations
•Increasesd reliability of the system

Design Feature
•Anti blow out/low emission stems
•Fire safe & anti-static design
•Independent ball and stem
•Self aligning trims
•Self relieving/ Double piston effect
floating seats
•Soft or metal seated

Chinese Top Entry Trunnion Mounted Ball Valve Manufacturer
Why Choose us?
1.      Factory: 
AEA VALVE, a specialist manufacturer, established since 2008 and professional production of industrial valves over 10 years.
2.      Regional Sale: 
We provide specialized sales service refers to different kind of region all over the world. Each sales team member is good at the local language and well experienced to the responsible market. For example: Russian, German, Spanish, Japanese, etc.
3.      Low MOQ: 
Our factory owns the casting company by itself. We are always ready for providing the sample and producing some small orders, in order to meet the business well.
4.      OEM or Customize: 
OEM Service or Customized size is Available. 
5.      We can make the products with the client's demand standard or the custom requirement.
6.      Complete Solution: 
We are always ready to hear from you, be responding to your enquiry immediately. Our trade manager is always online for you.
7.      High Quality: 
We have strict quality control system and amounts of testing equipments for different kind of valve, such as size, pressure, working environment etc. We are winning the market reputation with the time goes by.
8.      Quick Delivery: 
We have the large stock for some hot products.
9.      Competitive Price: 
10.  We are the manufacturing company which not only has our own manufacturing workshop, but the casting company as well. We provide the straight factory price and service to our customer.
11.  Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product. 
12.  Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you. 
13.  Integrity: All the warranty and guarantee from us will be put into come true
14.Online Service: any inquiry, please contact with email:  . We will reply you within 12 hours.

Standard Injection Molding Machine

1. Injection Molding Machine equipment function



â‘  According to the properties of the raw materials used for the products, the screw forms of different structures suitable for the plasticizing conditions can be selected and replaced.



â‘¡ According to the plasticizing conditions of raw materials for products, there should be a stable heat source for heating.



â‘¢ According to the requirements of the product forming quality, the accuracy of the primary feeding quantity shall be guaranteed.



â‘£ In order to ensure the plasticizing quality of raw materials, the screw should have an adjustable and stable back pressure when working.



⑤ According to the needs of different raw materials for post-melting molding, the injection pressure and melt flow rate required by the process shall be available when injecting molten materials into the mold.



â‘¥ The clamping force of the mold during molding is greater than the expansion force of the molten material injected into the mold cavity.



⑦ Control the cooling and solidification molding speed of the molten material in the mold cavity with appropriate mold temperature.



⑧ The molten material flow channel in the forming mold is smooth, and the mold cavity has a certain release angle. According to the structure and shape of the product, the product ejection device shall be set in the molding mold if necessary.



Functions and characteristics of injection molding machine



2. Characteristics of injection molding products



â‘  Various plastic products with complex shapes can be formed at one time.



â‘¡ The structure and mutual position size of the molded parts can be guaranteed, and the surface quality of the products is good.



â‘¢ The structure shape and size of each part of the product can be different, which can ensure the mutual position of the product and the accuracy requirements of the structure size, and the product can have good assembly interchangeability.



â‘£ Plastic products with metal inserts can be injection molded.



⑤ Injection molded parts can be standardized, normalized and serialized.



â‘¥ The production operation of the injection molding machine is relatively simple, and the adjustment and update of the molding mold are relatively convenient.



⑦ The injection molding machine adopts fully automatic production of plastic products, with high production efficiency.



⑧ The investment in injection molding equipment is relatively large, and the manufacturing cost of molds for molding is relatively high. The process conditions for injection molding of molded products need to be strictly controlled.

Standard Injection Molding Machine,Ce Standard Injection Molding Machine ,Standard Injection Machine,Plastic Injection Machine

Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachinery.com