Overview 2. 100% low excess air coefficient, using vortex combustion process. 3. Low temperature control system design, operation cost is low, the use of cold heat exchanger cooling process can realize resource recycling. 4. Cover an area of an area small, simple operation, convenient maintenance. 1. Long lifetime 2. Totally enclosed operation 3. Suitable for treating infectious waste 4. Avoid secondary pollution 5. Simple operation Technological process(Take the case of animal whole-body burning) 1.  Diseases of livestock and poultry body as a whole into the incinerator, start switch program by combustion engine combustion spontaneous combustion, the general temperature control in 650-850 degrees Celsius can the body to complete carbide spontaneous combustion. 2. A portion of the fuel particles in the process of combustion conditions restrictions non-flammable, so the device is equipped with a size exhaust gas purifier in the combustion state combustion until completely carbide. 3.  Carbide after burning need to select site (away from the water and residential area) were buried, completely put an end to the spread of germs. 4. The operation of the incinerator control adopts automatic program control, reduce the labor intensity of workers, incinerator furnace door, the design of the slag discharge door adopt full sealed structure, burning furnace and totally isolated from outside the furnace, forming negative pressure combustion, put an end to the possibility of secondary pollution, especially for dangerous infectious medical waste treatment, more can reveal its unique advantage. Incineration system 1.Furnace body is made up of refractory materials, insulation materials, insulation materials,   laying on the top of the cavity of grate outsourcing steel plate to prevent gas leakage and    the furnace body surface temperature is less than 50 ºC.In the furnace body is equipped with the access door side, auxiliary ignition burner on the side, too.The furnace body is equipped with work station. 2.Flue gas in the chamber of a stove or furnace from the bottom to wash the material, the moisture in the material drying, make material on fire in time. And arch before and after the refractory material accumulation of heat and radiation, so as to ensure the material combustion temperature.Prolong the residence time of flue gas, make the material and fly ash in the organic matter complete combustion, increase the destruction rate of harmful substances. 3.Furnace body in high temperature refractory lining, insulating material, is among the outer layer is a thermal insulation material, can reduce furnace body heat loss, improve the efficiency of burning;Appearance using steel plate as a protective layer to prevent air leakage;The refractory is developed by our company and building materials science research institute an acidic gas corrosion resistant, high temperature resistant, high strength refractory materials. 1. China Leading Producing Technology 2. Super High Quality 3. Competitive Price 4. Big Production Ability 5. Fast Delivery 6. Excellent Sale and After-sale Service FAQ 1.  Are you a factory or trading company? 2.  Samples are available? 3.  The product test before shipping? 4. After sale service? 5. How do you guarantee I can receive the goods that ordered after make the payment? 6. How to make the payment? 7.  I want to know more about your company and your products, how? 8.  Where are you? Can we go to China and visit your factory? Yes, of course. We are in Weifang, China. Welcome to our factory. Jane Wei Weifang Zhite Environmental protection technology Co.,Ltd. Address:Dongsi Road,Dongcheng development zone,Linqu,Weifang city,Shandong province,China. Website:http://wfzthuanbao.en.made-in-china.com/ Mol:8618162085975 Yoga Mat ,Cheap Yoga Mats,Yoga Pad,Yoga Mat Towel nantong pinli fitness co.,ltd , https://www.ntcnpinlifitness.com
Â
1. This equipment is a kind of suitable for the hospital medical waste, life rubbish, dead animals, the villages and towns of urban garbage disposal and so on various aspects non-hazardous wastes treatment equipment.
2. Â Simple and convenient operation, high burning temperature and burning of organic matter removal rate was 99%, Fast burning speed, effectively.Covers an area of small, low cost, low malfunction,easy maintenance.
Specifications
1. Competitive price/reliable qualityÂ
2. Suitable for Medical Waste,Dead Animals,etc.
3.  High working efficiency  
Features
1. A combustion chamber temperature 650 ~ 850 ºC, fuel completely ashing, reduced capacity more than 97% or higher;The furnace heating up fast, fuel consumption, burning full.
Scope
medical waste, dead animals, Marine garbage incineration or general enterprises of garbage, street leaves, town hospital, living garbage, laboratory waste etc.
Advantages
The main technical parameters
Model
ZTFS-25
ZTFS-20-25
ZTFS-20-60
ZTFS-20-120
ZTFS-150-400
Burning
dogs, cats
rat, rabbit, monkey, dog
chicken, duck, goose, birds
pig
pigs, horses, cattle
Processing
(kg/batch)25
20-25
20-60
20-120
150-400
Volume
(m³)2.5
2.5
3.0
8.0
16.0
Power consumption
(kw/h)2
2-4
2-5
3-12
15-50
Fuel consumption
(L/h)3
3-10
3-12
4-15
20-60
Equipment size
(mm)2500×1500
×14002300×1200
×21002200×1300
×23002500×2300
×30003000×4000
×2800
Weight(t)
1
3-8
4-8
4-12
15-45
What We Have Â
We are a company specializing in the production of various kinds of shredding machine, crusher, excrement and urine processor for the equipment manufacturers.
Yes, the sample for your test quality.
Yes, all the equipment before delivery to commissioning, there is no problem of equipment to the factory.
For most of the machines, the quality is guaranteed for one year since the date of shipment except wearing parts, we supply the on-line service for all the machines, and also supply the spare parts all the time with cost price, for some complicated machine or plant, we can send our engineer overseas too.
Please be rest assured that you will receive the goods in time, we are a legally established company supervised by the government, and is registered in customs of China and China Chamber of International Commerce. Besides, we are the golden member of MADE IN China. COM and has been checked by the third party as the real and legal company.
Normally, when the order value is below USD10, 000, we accept the payment by T/T or Western Union or Cash, L/C will be accepted when the order value is over USD10, 000. For T/T, the customer can choose 100% in advance or 30% in advance, and pay the 70% balance before shipment.
We will sent you a catalugue as well as a questionaire which covers your requiement. Your kindly reply about filling the questionaire will be greatly appreciated.
Company brief introduction
Our company supplies different kinds of products. High quality and favorable price. We're pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of " Quality first, service first, continuous improvement and innovation to meet the customers" For the management and " Zero defect, zero complaints" As the quality objective.
Customers to buy our company products are sold, is only the beginning of the relationship with our company, is the beginning of the after-sales service work, in the whole stage of customers to use the machine, we all after-sales service staff with thoughtful, meticulous, enthusiastic, timely service, let customers at ease, worry-free use of equipment, can really experience the our products bring convenience and create value for customers.
All equipment produced by our company can customize according to customer's requirements.
Thank you for your attention to our products, if you want to know more information, please feel free to contact us, we sincerely provide you with the most satisfactory service!
Main products
1.Incinerator
2.Pet Incineartor
3.Small Incinerator
4.Waste Incinerator
5.Marine Incinerator
6.Garbage Incinerator
7.Portable Incinerator
8.Medical Incinerators
9.Hospital Use Incinerator
10.Living Garbage IncineratorÂ
11.Animal Carcasses IncineratorÂ
12.Harmless Disposal IncineratorÂ
10.Living Garbage IncineratorÂ
11.Animal Carcasses IncineratorÂ
12.Harmless Disposal Incinerator Â
Contatc way:
Animal Carcasses/Solid Waste/Medical Waste/Hospital Use/Living Garbage/Marine Incinerator
Model NO.: ZTFS-20-25
Burning: Mouse, Rabbit, Monkey, Dog
Processing(Kg/Batch): 20-25
Volume(M3): 2.5
Power Consumption(Kw/H): 2-4
Fuel Consumption(L/H): 3-10
Size(mm): 2300*1200*2100
Weight(T): 3-8
Subject Range: Medical Waste, Dead Animals, etc.
Trademark: ZTHB
Transport Package: with Wooden Box
Specification: ZTFS-20-25
Origin: Shandong, China
HS Code: 8417809090
Animal Carcasses/solid Waste/medical waste/hospital use/living garbage/kitchen waste/dead pet/marine/munipical waste Incinerator