Co2 Laser Cutting Machine(we also call it dioxide laser) is a machine to marking, cutting or engraving on a wide range of materials (plastic, wood, metal, leather, glass...) it have below advantage compared with plasma or water jet
1. Less noise
2. No tool wear and tool change
3. No distortion or warping on flexible and thin materials due to low heat input
4. full automated
5. Smooth cutting edg
6. Save with closely nested patterns with narrow kerf width
7.low power consumption
8. safe
9. flexible operation
The most important thing is cheap. With those advantage, it can cut a wider range of materials.
Co2 Laser Cutting Machine,Fabric Cutting Laser Machine,Laser Cutting Engraving Machines,Hobby Laser Cutting Machine Shandong Meiman Laser Technology Co., Ltd. , https://www.meimanlasers.com
Wire diameter used for the knitting directly affects flow, dirt holding capacity, pressure drop and cost. Knitted wire mesh demister pad is used to separate in the most efficient manner the very fine drops carried away by a gas or steam, either at a boiling stage, vacuum evaporation or bubbling of a liquid. In fact there are two phenomena, one mechanical and one physical, but no filtration at all since the size of the held drops has no realtion with the infinitely greater size of the pore or open space. The head loss or gas passage resistance is practically imperceptible, however demisting can reach up to 99% efficiency. A demister reaches the highest efficiency when the speed of a gas or steam ranges between certain limits.
Net Block
Grid
Material
Code
Standard NO.
Material
Code
Standard NO.
Q235-A
Q235-A
GB434
Q235-A
Q235-A
GB327
20
20
BG3206
20
20
GB711
0Gr18Ni10Ti
321
0Gr18Ni9
304
GB423
0Gr17Ni12Mo2
316
0Gr18Ni10Ti
321
00Gr19Ni11
304L
00Gr17Ni12Mo2
316
00Gr17Ni14Mo2
316L
00Gr17Ni14Mo2
316L
RS-2
RS-2
Steel Grades
00Gr17Ni14Mo2
316L
NS-8
NS-80
Non-metallic materials: PTFE (F6) polyethylene, polypropylene, Nylon yarn, glass fiber and PVC and so on.
Note: use other materials bearing the note when ordering
NS-80A
NS-80A
Brass Wire
H68, H65
GB310
Tin-copper Wire
QSn
GB3128
Nickel
N4, N6, N7, N8
GB3120
Titanium and Titanium Alloy
TA2, TA3, TC3, TC4
GB3623
Acs 4ba Mist Eliminator for Fliter
Model NO.: FR
Structure: Combined
Trademark: 369
Specification: ISO9001
Origin: Hebei China
HS Code: 73144900
We manufacture Demister Pads as per customer specifications. Range of Production: Demister Pads can be produced in varied degrees of density with 99.99% Efficiency. Demister Pads are essentially porous blankets of carefully knitted wire mesh designed and constructed to efficiently abate mist particles.