December 23, 2024

ACDC IGBT Inverter TIG/MMA/Pulse Welding Machine (ACDC160E)

Posted on

Model NO.: ACDC160E
Origin: China
HS Code: 85153900
Model NO.: ACDC160E
Origin: China
HS Code: 85153900
INVERTER IGBT AC/DC TIG/MMA WELDING MACHINE ACDC160E
IGBT advanced double inverter technology
Single phase power supply: 1X220/230/240V50/60Hz Fuse 14.7/20.7A
Light weight.
HF arc start for TIG, arc force for MMA
2T/4T and pulse control function for TIG
AC/DCTIG suitable for steel, stainless steel, aluminm.
Digital display
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp, TIG torch 4m, gas hose 2m.
Over hot and current protection.
Input Voltage: 1X220/230/240V 50/60Hz Input Power: 4.8KVA
No load Voltage: 60~80V Current Range: 5(20A AC)~160A
Duty Cycle: 60% PRO-gas flow time: 0~10s
Gas post flow time: 1~25s
SP Value(Balance): 30~70%.

Model ACDC200E
Input voltage 1X230V   50/60HZ
Input power capacity 4.1KVA
No load voltage 60V
Current Range 10-200A
Rate duty cycle 0.6
Pro-gas flow time 0-1S
Gas post flow time 1-10S
Current down-slope time 0-5S
SP value(balance) 10-90%
Dimensions(LXWXH) 493X330X320mm
Weight(kg) 30
Dimater of wire 0.8-1.6mm


G/N Weight(kgs) 30/35
Machine size (mm) 493X330X320mm
Accessories TIG torch&&earth clamp&welding holder etc

INVERTER IGBT AC/DC TIG/MMA WELDING MACHINE ACDC160E
IGBT advanced double inverter technology
Single phase power supply: 1X220/230/240V50/60Hz Fuse 14.7/20.7A
Light weight.
HF arc start for TIG, arc force for MMA
2T/4T and pulse control function for TIG
AC/DCTIG suitable for steel, stainless steel, aluminm.
Digital display
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp, TIG torch 4m, gas hose 2m.
Over hot and current protection.
Input Voltage: 1X220/230/240V 50/60Hz Input Power: 4.8KVA
No load Voltage: 60~80V Current Range: 5(20A AC)~160A
Duty Cycle: 60% PRO-gas flow time: 0~10s
Gas post flow time: 1~25s
SP Value(Balance): 30~70%.

Model ACDC200E
Input voltage 1X230V   50/60HZ
Input power capacity 4.1KVA
No load voltage 60V
Current Range 10-200A
Rate duty cycle 0.6
Pro-gas flow time 0-1S
Gas post flow time 1-10S
Current down-slope time 0-5S
SP value(balance) 10-90%
Dimensions(LXWXH) 493X330X320mm
Weight(kg) 30
Dimater of wire 0.8-1.6mm


G/N Weight(kgs) 30/35
Machine size (mm) 493X330X320mm
Accessories TIG torch&&earth clamp&welding holder etc

Paper Holder

The paper holder includes a rack body and a rack shaft. The rack body includes a left baffle, a right baffle and a wall plate. At the rear end of the chute, the two ends of the frame shaft are respectively connected by sliding or rolling with the chute on both sides of the frame body, and the wall plate has a boss parallel to the frame shaft, which overcomes the shortcomings of the prior art and provides a method that only uses one The paper roll holder that can tear the paper by hand. The described technical solution adopts the paper jam structure in which the movable frame shaft structure of the slideway and the frame shaft is combined with the boss on the frame body, so as to realize the use of one hand The process of pulling and breaking the paper can be completed, which is very convenient to use.



Bathroom Toilet Paper Holder,Toilet Paper Holder With Shelf,Wall Mounted Toilet Paper Holder,Stainless Steel Toilet Paper Holder

Taishan Jie Da Electrical Co., Ltd , https://www.ts-jieda.com