November 17, 2024

4000W Low Temperature Spray Dryer Equipment with Ce (YC-1800)

Posted on

Model NO.: YC-1800
Fluid Bed Drying Equipment Type: No
Vacuum Drying Equipment Type: Spray Dry
Condition: New
Item Name: Low Temperature Spray Dryer
Brand: Yacheng
Model Number: Yc-1800
Power: 4kw,220V
Frequency: 50/60 Hz
Body Material: SUS304 Stainless Steel
Evaporating Capacity: 1500ml/H for Water
Airflow: 0-330 M3/H
Inlet Temperature: 105~200degree Centigrade
Max. Sample Feed: 1800ml/Hr
Trademark: Pilotech
Transport Package: Tri-Ply Wood
Specification: CE
Origin: Shanghai
HS Code: 8419399090

PRODUCT DETAIL
Product Profile
 
For a long time laboratory traditional Chinese medicine (herbal) natural product extraction and juice spray drying have been a difficult problem for scientific research personnel. Upon laboratory traditional Chinese medicine (herbal) natural product extraction and juice spray drying, materials immediately melt when spray dried as they have a lot of carbohydrate compositions which are easy to melt at high temperature and they form sticky candy like substances on drying chamber wall of traditional spray dryer. As a result, scientific research personnel can not get desirable powder with good liquidity. Sometimes a lot of auxiliary materials are added in order to get the powder, such as starch or cyclodextrine, but no satisfactory effect has been achieved.
 
Product Description
 
YC-1800 laboratory low-temperature spray dryer is a breakthrough made by Shanghai Pilotech Instrument & Equipment Co., Ltd with efforts in spray drying technology. YC-1800 can extract natural product and juice from traditional Chinese medicine (Chinese herbal medicine) in laboratory and get powder particles of excellent liquidity at a low temperature of 110°C with a high yield. In particular, it achieves rapid material drying at low temperature and provides very convenient and safe drying method for thermo-sensitive materials, such as biological product, high carbohydrate traditional Chinese medicine natural product extract, thermolabile polymer material, heat gasification material and so on.
 
PRODUCT PARAMETERS
Features
 
1)Spray dry at low temperature (110ºC) using for thermosensitive material.
 
2)7" high-resolution LCD, human-oriented interface, Chinese and English menu, Optimize operation procedure, efficiency, flexibility, easy-going and easy learning.
 
3)Patrticle size with normal distribution.
 
4)Two fluid atomizing structure, made of SUS 304(316 optional)Stainless steel. Easy operating.
 
5)To assure accurate temperature control and easy parameter adjusting, YC-1800 applies PID.
 
6)The self-priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber to avoid secondary pollution.
 
Parameters
 
1,Two fluid atomizing structure, made of SUS 304(316 optional)Stainless steel.
 
2,Evaporation rate of water at inlet temperature of 110ºC using Standard:Approximately 1000 ml~ 1800ml/hour.
 
3,Min sample:50ml.
 
4,To assure accurate temperature control and easy parameter adjusting, YC-1800 applies PID.
 
5,standard with 0.7 mm jet and other sizes are available as accessories.
 
6,Power: 4KW/380V.
 
7,Spray dry at low temperature (105ºC) using for thermosensitive material.
 
8,7" high-resolution touch screen LCD.
 
 

Sr.no		 Parameter Pilotech YC-1800 low temperature spray dryer 
1 Power  4000W
2 Voltage 220V
3 Frequency 50/60 Hz
4 Evaporating Capacity 1500ml/h for water
5 Airflow 0-330 m³/h
6 max. Inlet temperature 200C
7 Heating power 3500W
8 Temperature precision ±1C
9 Compressed air 4.2m³/h, 2-5bar
10 Nozzle jet 0.7mm standard/(0.5/0.75/1.0/1.5/2.0mm available)
11 Nozzle type Two fluid nozzle
12 Possible particle size range 1-25µm
13 Mean Residence time 1.0-1.5 sec
14 Operation mode Automatic/Manual
15 Max. Sample feed 1800ml/hr
16 Minimum sample volume 30ml
17 Seal of cyclone/cylinder  Silicone
18 Inlet temperature 105~200C
19 Cyclone separator material SUS-304 Stainless steel
20 Body material SUS-304 Stainless steel
21 Spray chamber material SUS-304 Stainless steel & borosilicate glass
22 collection bottle material SUS-304 Stainless steel
23 Sound <60db
24 Dimensions 1100*1000*1200mm
25 Weight 115KG
26 Display 7-Inch LCD display for Heat, Spray, Pump, Air pressure, de-blocker frequency
27 Thermal protection Blower does not stop until temp <90C
28 Deblocking Automatic
29 Atomizer material  SUS 316 Stainless steel

 

 

1, sliding bearing
2, joint bearing
3, rolling bearing
4, deep groove ball bearings
5, self-aligning ball bearings
6, thrust ball bearings
7, two-way thrust angular contact ball bearings
8, thrust roller bearings
9, needle bearing
10, outer spherical Ball Bearing
11, spherical roller bearings
12, flange bearing
13, with bearing
14, combined bearing
15, linear bearings

Other Ball Bearing

Ball Bearing,Deep Groove Ball Bearing,Miniature Ball Bearings,UCP Units Bearings

Hebei Naimei Bearing Co., Ltd. , https://www.nmn-bearing.com